

MecanumRobot
Mecanum robot, literally
- Size
- 66 × 44 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 11
- Nets
- 75
- Pads
- 136
- Tracks, vias
- 0, 0
- Routed
- Not yet
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Oct 2024
- Updated
- 22 May 2025
Overview
MecanumRobot is an open-source printed circuit board by Robotika2, from the Robotika2/MecanumRobot repository on GitHub, published under the MIT licence. It is a 2-layer board of 66 × 44 mm with 11 parts on 75 nets.
It is built around the ESP32-S3-WROOM-1-N8 and ICM-42670-P. Its parts include 5 connectors, 3 capacitors, 2 ICs and 1 resistor. It belongs with the ESP32 boards of this library.
Main components
2ESP32-S3-WROOM-1-N8
SMD,25.5x18mm-40℃~+85℃ -98.2dBm 2.4GHz 20.5dBm 355mA 3V~3.6V 95mA Bluetooth5.0 ESP32-S3 Chip On-board PCB Antenna UART、SPI、I2C、I2S、USB SMD,25.5x18mm WiFi Modules ROHSEspressif SystemsWiFi ModulesICM-42670-P
LGA-14(2.5x3)-40℃~+85℃ 1.71V~3.6V 16bit 2.25KB 3.5uA IMU (accelerometer + gyroscope) Motion event detection SPI、I2C、I3C X,Y,Z X,Y,Z ±16g ±2000dps LGA-14(2.5x3) Accelerometers ROHSTDK InvenSenseAccelerometers
README
README.mdMecanumRobot
Mecanum robot, literally
Parts
11| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | Conn_01x06_Pin | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J2, J3, J4, J5 |
| 2 | 0.1uF | Capacitor_SMD:C_0201_0603Metric | C2, C3 |
| 1 | 10nF | Capacitor_SMD:C_0201_0603Metric | C1 |
| 1 | 1M | Resistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolder | R1 |
| 1 | ESP32-S3-WROOM-1 | RF_Module:ESP32-S3-WROOM-1U | U2 |
| 1 | ICM-42670-P | Components:ICM42670P | IC1 |
| 1 | USB_C_Receptacle_USB2.0_14P | Connector_USB:USB_C_Receptacle_HCTL_HC-TYPE-C-16P-01A | J1 |
More from Robotika2/MecanumRobot
1- 2 layers

Similar boards
- 4 layers35 × 99.9 mm

Snips controller
thePunderWoman/SnipsControllers
The controllers built to work with Amidala
95 parts3GPL-2.0 - 4 layers88.7 × 49.5 mm

- 4 layers72.5 × 85.4 mm

- 2 layers56.5 × 27.9 mm

- 4 layers51.9 × 63.7 mm

Esp32-s3-wroom1
xbtry/esp32s3-dev-board-v0
Hardware design and bring-up repository for a custom ESP32-S3 dual-core microcontroller board designed in KiCad.
60 parts - 2 layers

Quad unibody placement0
ajwock/quadcopter
Quadcopter designed and programmed thoroughly from scratch
64 parts15 - 2 layers32 × 42 mm

- 2 layers14.3 × 24.3 mm

ICM-42670-P Breakout Board
EbenenBonobo/ICM-42670-P-Breakout-Board
Breakout Board Design for the ICM-42670-P but should work with similar ICM 42... Sensors. Designed by me, improved by Reddit
9 parts10GPL-3.0
Questions
How big is the MecanumRobot PCB?
It measures 66 × 44 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MecanumRobot use?
11 parts, built around the ESP32-S3-WROOM-1-N8 and ICM-42670-P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MecanumRobot KiCad files?
From the Robotika2/MecanumRobot repository on GitHub, at the commit this page was made from: the board is PCB/MainBoard/MainBoard.kicad_pcb and its schematic PCB/BatteryBoard/BatteryBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MecanumRobot design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).