

MotorBoard
Mecanum robot, literally
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 29
- Pads
- 101
- Tracks, vias
- 209, 47
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Oct 2024
- Updated
- 22 May 2025
Overview
MotorBoard is an open-source printed circuit board by Robotika2, from the Robotika2/MecanumRobot repository on GitHub, published under the MIT licence. It is a 2-layer board with 17 parts on 29 nets, routed with 209 tracks and 47 vias.
It is built around the ATTINY1617-MN. Its parts include 6 capacitors, 6 connectors, 2 resistors and 2 ICs. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
1README
README.mdMecanumRobot
Mecanum robot, literally
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C2, C3, C5 |
| 2 | Conn_01x04_Pin | Connector_PinHeader_2.00mm:PinHeader_1x04_P2.00mm_Vertical | J5, J6 |
| 1 | 10K | Resistor_SMD:R_0603_1608Metric | R2 |
| 1 | 1uF | Capacitor_SMD:C_0603_1608Metric | C6 |
| 1 | 22nF | Capacitor_SMD:C_0603_1608Metric | C1 |
| 1 | 47uF | Capacitor_Tantalum_SMD:CP_EIA-7343-15_Kemet-W | C4 |
| 1 | 5.5K | Resistor_SMD:R_0603_1608Metric | R1 |
| 1 | ATtiny1617-M | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U1 |
| 1 | Conn_01x03_Pin | Connector_PinHeader_2.00mm:PinHeader_1x03_P2.00mm_Vertical | J4 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J2 |
| 1 | Conn_01x06_Pin | Connector_JST:JST_PH_B6B-PH-K_1x06_P2.00mm_Vertical | J3 |
| 1 | DRV8874PWPR | Package_SO:HTSSOP-16-1EP_4.4x5mm_P0.65mm_EP3.4x5mm_Mask2.46x2.31mm_ThermalVias | IC1 |
| 1 | Jumper_3_Bridged12 | Jumper:SolderJumper-3_P1.3mm_Bridged2Bar12_RoundedPad1.0x1.5mm_NumberLabels | JP1 |
| 1 | Power | Connector_JST:JST_VH_B2P-VH-FB-B_1x02_P3.96mm_Vertical | J1 |
More from Robotika2/MecanumRobot
1- 2 layers66 × 44 mm

Similar boards
- 2 layers92.5 × 150.6 mm

- 4 layers79.7 × 139.5 mm

- 2 layers92.5 × 151 mm

- 2 layers85.5 × 54 mm

STTS
EthanKerman/STTS
A behbeh credit card sized synth for your wallet. The keys are a full octave ad you can go up and down 2 more. The noise from a piezo disc which is why theres a hole in the board.
43 parts - 2 layers19.1 × 24.1 mm

Malenki nano2
MarkR42/malenki-esc
A small electronic speed controller for e.g. tiny fighting robots or other rc models
25 parts7 - 2 layers40 × 25 mm

- 4 layers82 × 61 mm

- 4 layers68 × 40 mm

Questions
What parts does the MotorBoard use?
17 parts, built around the ATTINY1617-MN. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MotorBoard KiCad files?
From the Robotika2/MecanumRobot repository on GitHub, at the commit this page was made from: the board is PCB/MotorBoard/MotorBoard.kicad_pcb and its schematic PCB/BatteryBoard/BatteryBoard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MotorBoard design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).