

Purplewizard
The DC801 Badge Platform for DC28+
- Size
- 92.5 × 151 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 160
- Nets
- 173
- Pads
- 688
- Tracks, vias
- 2,100, 304
- Pours
- 7
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 11 Aug 2020
- Updated
- 22 Nov 2020
Overview
Purplewizard is an open-source printed circuit board by DC801, from the DC801/BM-Badge-deprecated repository on GitHub, published under the AGPL-3.0 licence. It is a 2-layer board of 92.5 × 151 mm with 160 parts on 173 nets, routed with 2,100 tracks and 304 vias.
It is built around the ATTINY1617-MN, BMD-340-A-R and NAU8810YG, with the PAM2305AABADJ, SKRHABE010 and FDN360P among its other parts. Its parts include 46 diodes, 26 capacitors, 20 connectors, 19 switches and 18 resistors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Main components
7ATTINY1617-MN
QFN-24-EP(4x4)-40℃~+105℃ 1.8V~5.5V 10bit 16KB 20MHz 22 256Byte 2KB 8 Bit 8bit AVR Built-in FLASH VQFN-24-EP(4x4) Microcontrollers (MCU/MPU/SOC) ROHSMicrochip TechnologyMicrocontrollers (MCU/MPU/SOC)BMD-340-A-R
LGA-60LGA-60 Bluetooth Modules ROHSu-bloxBluetooth ModulesNAU8810YG
QFN-20(4x4)-40℃~+85℃ 1.71V~3.6V、2.5V~3.6V 8kHz~48kHz Built-in phase-locked loop、On-chip digital gain、Mute control Encoder/decoder I2S QFN-20(4x4) Audio Interface ICs ROHSNuvoton TechAudio Interface ICsPAM2305AABADJ
TSOT-25-40℃~+85℃ 1 1.5MHz 1A 2.5V~5.5V 40uA 600mV~5.5V Adjustable Buck Buck Built-in Yes TSOT-25 DC-DC Converters ROHSDiodes IncorporatedDC-DC ConvertersSKRHABE010
SMD-8P,7.5x7.5mmSMD-8P,7.5x7.5mm Multi-Directional Switches ROHSALPSALPINEMulti-Directional SwitchesFDN360P
SOT-23-55℃~+150℃ 1 P-Channel 1.2W 145pF 2A 300pF 30V 3V 60mΩ@4.5V SOT-23 MOSFETs ROHSTECH PUBLICMOSFETsSP0503BAHTG
SOT-143-55℃~+125℃ 10A@8/20us 14V 150W@8/20us 30pF、60pF 5.5V 6V 80nA ESD IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 Three channels Unidirectional SOT-143 ESD and Surge Protection (TVS/ESD) ROHSTECH PUBLICESD And Surge Protection (TVS/ESD)
README
README.mdBM-Badge
The DC801 Badge Platform for DC28+
Hardware
The DC801 BM-Badge brings you an expandable iteration of our robust platfomer
- Core CPU is the Nordic nRF52840 SoC, on the u-blox BMD-340 module
- https://www.u-blox.com/en/product/bmd-34-series-open-cpu
- 256k RAM, 1M internal flash, ARM® Cortex™ M4F CP @ 64Mhz
- Bluetooth 5 with Bluetooth mesh and Zigbee support
- Temperature sensor
- 27 buttons with NKRO via a dedicated controller
- Microchip ATiny1617 microcontroller, with UPDI programming support
- https://www.microchip.com/wwwproducts/en/ATtiny1617
- 19 LEDs
- SD card socket
- 32MB of quad-spi flash
- NAU8810 audio codec and speaker
- 2.4" 240x320 TFT LCD screen with touch panel
- LiPo battery with on-board charging
- USB-C interface supporting USB endpoints
- SAO 1.69bis and Saintcon MiniBadge expansion headers
- Support for the DC801 ART front board expansion
- JTAG via both standard ARM interface as well as Tag Connect
- USB drag-and-drop programming via a UF2 interface (based on the adafruit bootloader)
- Exciting new artwork and sandwich design
Board design is in KiCad
See the HW directory for more info, schematics and etc
ART - Asymmetric Resistive Token
Since this badge is a sandwich platform badge, we've include a template so that you can design your own front boards.
Check out the Template that you can create a new project in KiCad with.
Software
- Environment is GNU ARM GCC with your choice of IDE
- Programmable via JTAG or USB bootloader
See the Software directory for more info
Parts
160| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | D_ALT | Diode_SMD:D_SOD-323_HandSoldering | D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38, D39 +10 |
| 16 | TACTILE | lib_fp:SW_SPST_PTS647 | SW2, SW3, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17 |
| 9 | 0.1uF | Capacitor_SMD:C_0603_1608Metric | C1, C13, C14, C15, C17, C20, C23, C24, C25 |
| 6 | 4.7uF | Capacitor_SMD:C_0603_1608Metric | C2, C4, C5, C8, C9, C12 |
| 4 | 0.47uF | Capacitor_SMD:C_0603_1608Metric | C16, C18, C21, C22 |
| 4 | Fiducial | Fiducial:Fiducial_1mm_Mask2mm | FID1, FID2, FID3, FID4 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R1, R12 |
| 2 | 10uF | Capacitor_SMD:C_0603_1608Metric | C3, C26 |
| 2 | 27R | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 2 | 4.7k | Resistor_SMD:R_0603_1608Metric | R2, R3 |
| 2 | 47pF | Capacitor_SMD:C_0603_1608Metric | C10, C11 |
| 2 | 5.1k | Resistor_SMD:R_0603_1608Metric | R10, R11 |
| 2 | D_Schottky | Diode_SMD:D_SMA | D1, D2 |
| 2 | GND | TestPoint:TestPoint_Pad_1.5x1.5mm | J2, J27 |
| 2 | SKRHABE010 | lib_fp:SKRHABE010 | SW18, SW19 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R14 |
| 1 | 120k | Resistor_SMD:R_0603_1608Metric | R18 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R16 |
| 1 | 1nF | Capacitor_SMD:C_0603_1608Metric | C7 |
| 1 | 2.0k | Resistor_SMD:R_0603_1608Metric | R9 |
| 1 | 20k | Resistor_SMD:R_0603_1608Metric | R15 |
| 1 | 22uF | Capacitor_SMD:C_0805_2012Metric | C6 |
| 1 | 22uF | Capacitor_SMD:C_0603_1608Metric | C19 |
| 1 | 2M | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | 3.3V | TestPoint:TestPoint_Pad_1.5x1.5mm | J1 |
| 1 | 33R | Resistor_SMD:R_0603_1608Metric | R13 |
| 1 | 4.7uH | Inductor_SMD:L_0805_2012Metric | L1 |
| 1 | 470R | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 540k | Resistor_SMD:R_0603_1608Metric | R17 |
| 1 | 806k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | ADD | LED_SMD:LED_0603_1608Metric | D10 |
| 1 | ATtiny1617-M | Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm | U7 |
| 1 | BIT1 | LED_SMD:LED_0603_1608Metric | D23 |
| 1 | BIT128 | LED_SMD:LED_0603_1608Metric | D7 |
| 1 | BIT16 | LED_SMD:LED_0603_1608Metric | D22 |
| 1 | BIT2 | LED_SMD:LED_0603_1608Metric | D18 |
| 1 | BIT32 | LED_SMD:LED_0603_1608Metric | D17 |
| 1 | BIT4 | LED_SMD:LED_0603_1608Metric | D13 |
| 1 | BIT64 | LED_SMD:LED_0603_1608Metric | D12 |
| 1 | BIT8 | LED_SMD:LED_0603_1608Metric | D8 |
| 1 | BMD-340 | lib_fp:RIGADO_BMD-340 | U3 |
| 1 | Badgelife_sao_connector_v169bis | lib_fp:Badgelife-Shitty-v1.69bis | X1 |
| 1 | Battery | Connector_JST:JST_PH_S2B-PH-SM4-TB_1x02-1MP_P2.00mm_Horizontal | J14 |
| 1 | Board to Board | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical_SMD | J17 |
| 1 | Conn_01x50 | Connector_FFC-FPC:Hirose_FH12-50S-0.5SH_1x50-1MP_P0.50mm_Horizontal | J16 |
| 1 | FDN360P | Package_TO_SOT_SMD:SuperSOT-3 | Q1 |
| 1 | HAX | LED_SMD:LED_0603_1608Metric | D14 |
| 1 | IS31FL3736 | lib_fp:QFN-40-1EP_5x5mm_P0.4mm_EP3.6x3.6mm_LargerThermalVias | U6 |
| 1 | JTAG | lib_fp:PinHeader_2x05_P1.27mm_Vertical_Sneaky | J11 |
| 1 | LCD_MISO | TestPoint:TestPoint_Pad_1.5x1.5mm | J22 |
| 1 | LCD_MOSI | TestPoint:TestPoint_Pad_1.5x1.5mm | J6 |
| 1 | LCD_RD | TestPoint:TestPoint_Pad_1.5x1.5mm | J23 |
| 1 | LCD_SCK | TestPoint:TestPoint_Pad_1.5x1.5mm | J5 |
| 1 | LCD_TE | TestPoint:TestPoint_Pad_1.5x1.5mm | J24 |
| 1 | LCD_WR | TestPoint:TestPoint_Pad_1.5x1.5mm | J8 |
| 1 | LOGO | common_fp:pcbx_logo | G*** |
| 1 | LOGO | lib_fp:backboard-silk | G*** |
| 1 | LOGO | lib_fp:backboard-soldermask | G*** |
| 1 | LOGO | lib_fp:backboard-copper | G*** |
| 1 | LOGO | lib_fp:DC801_logo | G*** |
| 1 | MCP73832-2-OT | Package_TO_SOT_SMD:SOT-23-5 | U4 |
| 1 | MEM0 | LED_SMD:LED_0603_1608Metric | D6 |
| 1 | MEM1 | LED_SMD:LED_0603_1608Metric | D11 |
| 1 | MEM2 | LED_SMD:LED_0603_1608Metric | D16 |
| 1 | MEM3 | LED_SMD:LED_0603_1608Metric | D21 |
| 1 | MIC+ | TestPoint:TestPoint_Pad_1.5x1.5mm | J26 |
| 1 | MOUT | TestPoint:TestPoint_Pad_1.5x1.5mm | J25 |
| 1 | Micro_SD_Card | lib_fp:JAE_ST11S008V4HR2000 | J18 |
| 1 | Minibadge Expansion | Connector_PinSocket_2.54mm:PinSocket_2x10_P2.54mm_Vertical | J13 |
| 1 | NAU8810 | Package_DFN_QFN:QFN-20-1EP_4x4mm_P0.5mm_EP2.5x2.5mm | U1 |
| 1 | P1.05 | TestPoint:TestPoint_Pad_1.5x1.5mm | J21 |
| 1 | P1.06 | TestPoint:TestPoint_Pad_1.5x1.5mm | J20 |
| 1 | P1.07 | TestPoint:TestPoint_Pad_1.5x1.5mm | J7 |
| 1 | PAGE | LED_SMD:LED_0603_1608Metric | D20 |
| 1 | PAM2305AABADJ | Package_TO_SOT_SMD:SOT-23-5 | U2 |
| 1 | Power | lib_fp:SW_SPDT_CK-JS102011SAQN | SW1 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D3 |
| 1 | S25FL256S | Package_SO:SOIC-16W_7.5x10.3mm_P1.27mm | U5 |
| 1 | SD | LED_SMD:LED_0603_1608Metric | D19 |
| 1 | SP0503BAHT | Package_TO_SOT_SMD:SOT-143 | D4 |
The 148 most common of 160 parts.
Similar boards
- 2 layers92.5 × 150.6 mm

- 2 layers92.5 × 175 mm

- 2 layers99.4 × 60.4 mm

- 4 layers35.8 × 44.4 mm

- 4 layers40 × 80 mm

- 4 layers55.3 × 125.9 mm

MicroTAC
hackclub/OnBoard
💡 Join 1,000 teenagers and make your first PCB with a $100 grant!
142 parts915 - 4 layers79.7 × 139.5 mm

- 2 layers85.5 × 54 mm

STTS
EthanKerman/STTS
A behbeh credit card sized synth for your wallet. The keys are a full octave ad you can go up and down 2 more. The noise from a piezo disc which is why theres a hole in the board.
43 parts
Questions
How big is the Purplewizard PCB?
It measures 92.5 × 151 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Purplewizard use?
160 parts, built around the ATTINY1617-MN, BMD-340-A-R, NAU8810YG and PAM2305AABADJ. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Purplewizard KiCad files?
From the DC801/BM-Badge-deprecated repository on GitHub, at the commit this page was made from: the board is HW/BackBoard/purplewizard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Purplewizard design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).