4 layers36.4 × 49.3 mm
4 layers153.2 × 131.6 mm
Pixel pump ui board panel
robin7331/pixel-pump-ui-board20- Size
- 153.2 × 131.6 mm
- Copper layers
- 4
- Thickness
- 1.59 mm
- Parts
- 384
- Nets
- 132
- Pads
- 732
- Tracks, vias
- 2,244, 474
- Pours
- 14
- Routed
- Yes
- KiCad
- KiCad 6 (file 20211014)
- Created
- 24 Mar 2021
- Updated
- 8 Mar 2023
Overview
Pixel pump ui board panel is an open-source printed circuit board by robin7331, from the robin7331/pixel-pump-ui-board repository on GitHub. It is a 4-layer board of 153.2 × 131.6 mm with 384 parts on 132 nets, routed with 2,244 tracks and 474 vias.
It is built around the WS2812B-2020, B3U-1000P and SM10B-SRSS-TB(LF)(SN). Its parts include 72 ICs, 42 capacitors, 36 switches and 6 connectors.
Main components
3
WS2812B-2020
SMD,2.2x2mm0.6mA 0.84mm 120us 160mcd 200mcd 2kHz 2mm 2mm 300ns 470.4nm 515.6nm 520mcd 5V 622.5nm 800Kbit/s Built-in power-on reset circuit、Built-in power-on reset circuit、Integrated intelligent reverse connection protection function Top-mount SMD,2.2x2mm RGB LEDs(Built-in IC) ROHSWorldsemiRGB LEDs(Built-In IC)
B3U-1000P
SMD,3x2.5mm-25℃~+70℃ 1.53N 1.6mm 12V 2.5mm 3mm 50mA Round Button SMD(SMT) Tab SPST Surface Mount,Vertical SMD,3x2.5mm Tactile Switches ROHSOmronTactile Switches
SM10B-SRSS-TB(LF)(SN)
SMD,P=1mm,卧贴-25℃~+85℃ 1 10 10P 12mm 1A 1mm 1x10P 2.9mm 4.32mm 50V Auxiliary Solder Pin Copper alloy PA SH Surface Mount, Right Angle Tin UL94V-0 White SMD,P=1mm,卧贴 Wire To Board Connector ROHSJSTWire To Board Connector
Parts
384| Qty | Value | Footprint | References |
|---|---|---|---|
| 72 | WS2812B-2020 | WS2812-2020:LED_WS2812-2020 | U1, U1, U1, U1, U1, U1, U10, U10, U10, U10, U10, U10, U11, U11, U11, U11 +56 |
| 36 | 100n | Capacitor_SMD:C_0603_1608Metric | C1, C1, C1, C1, C1, C1, C2, C2, C2, C2, C2, C2, C3, C3, C3, C3 +20 |
| 36 | B3U-1000P | Button_Switch_SMD:SW_SPST_B3U-1000P | SW1, SW1, SW1, SW1, SW1, SW1, SW2, SW2, SW2, SW2, SW2, SW2, SW3, SW3, SW3, SW3 +20 |
| 24 | Fiducial | Fiducial:Fiducial_0.75mm_Mask1.5mm | FID1, FID1, FID1, FID1, FID1, FID1, FID2, FID2, FID2, FID2, FID2, FID2, FID3, FID3, FID3, FID3 +8 |
| 6 | +5V | TestPoint:TestPoint_Pad_D1.5mm | TP9, TP9, TP9, TP9, TP9, TP9 |
| 6 | 3v3 | TestPoint:TestPoint_Pad_D1.5mm | TP10, TP10, TP10, TP10, TP10, TP10 |
| 6 | 50p | Capacitor_SMD:C_0603_1608Metric | C7, C7, C7, C7, C7, C7 |
| 6 | DROP | TestPoint:TestPoint_Pad_D1.5mm | TP4, TP4, TP4, TP4, TP4, TP4 |
| 6 | G*** | kibuzzard-6108471A | kibuzzard-6108471A, kibuzzard-6108471A, kibuzzard-6108471A, kibuzzard-6108471A, kibuzzard-6108471A, kibuzzard-6108471A |
| 6 | G*** | kibuzzard-61084704 | kibuzzard-61084704, kibuzzard-61084704, kibuzzard-61084704, kibuzzard-61084704, kibuzzard-61084704, kibuzzard-61084704 |
| 6 | GND | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP1, TP1, TP1, TP1, TP1 |
| 6 | HIGH | TestPoint:TestPoint_Pad_D1.5mm | TP6, TP6, TP6, TP6, TP6, TP6 |
| 6 | LED DATA | TestPoint:TestPoint_Pad_D1.5mm | TP8, TP8, TP8, TP8, TP8, TP8 |
| 6 | LIFT | TestPoint:TestPoint_Pad_D1.5mm | TP2, TP2, TP2, TP2, TP2, TP2 |
| 6 | LOW | TestPoint:TestPoint_Pad_D1.5mm | TP3, TP3, TP3, TP3, TP3, TP3 |
| 6 | REVERSE | TestPoint:TestPoint_Pad_D1.5mm | TP5, TP5, TP5, TP5, TP5, TP5 |
| 6 | SM10B-SRSS-TB | SM10B-SRSS-TB:SM10B-SRSS-TB | J1, J1, J1, J1, J1, J1 |
| 6 | TRIGGER | TestPoint:TestPoint_Pad_D1.5mm | TP7, TP7, TP7, TP7, TP7, TP7 |
The 252 most common of 384 parts.
More from robin7331/pixel-pump-ui-board
1Similar boards
- 2 layers154.5 × 105.5 mm
Seismos 5CoreStencil
ReSummit/Seismos
A split keyboard that evolves the concept of the Zebra keyboard, but fancier
100 parts18GPL-3.0 - 4 layers35 × 35 mm
Canonical
AnasSarkiz/smart-nema14-motor-controller
STEPPERONLINE 14HM11-0404S controller — unrouted work-in-progress prototype; mechanical and electrical qualification pending
213 parts - 4 layers55 × 55 mm
Drone PCB FC
Ethansuttor/drone_PCB
An 80×80 mm STM32F405 flight controller for a 4S freestyle quad, running Betaflight off a custom target I wrote.
90 parts - 4 layers64 × 80 mm
Iris brainstem
HeyPCB/iris-brainstem
Iris Brainstem: power and servo hub of the Iris robot head. 9 V USB-C PD in, 6 V / 5 A servo rail in stitched copper zones (measured), 5 V rail, half-duplex servo bus with ten ports, speaker amp.
97 partsCERN-OHL-S-2.0 - 4 layers80 × 40 mm
Iris cortex
HeyPCB/iris-cortex
Iris Cortex: head controller of the Iris robot head. ESP32-S3 (16 MB flash, 8 MB PSRAM), OV2640 eye-camera FPC, iris-ring LED drivers, harness hub.
77 partsCERN-OHL-S-2.0 - 4 layers58 × 45 mm
Microduck CM4 Carrier R13
ldcyes/OpenDuck
已完成可编辑原理图、真实四层 PCB 和本地库。阶梯板面积 4510 mm²，比原 65×60 + 32×30 mm 两板总面积 4860 mm² 少 350 mm²（7.20%）。原 TDK 模块本体、四个安装孔和原 TDK 器件位置保留，回生电容采用原料号卧装，J1 因实际拔插通道冲突改为同系列 BM08 顶插。当前为工程候选，未制造，未完成热、回生瞬态、低电量或行走验收。
46 parts - 2 layers208.8 × 396.9 mm
Ferris
pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly
145 parts1.3k - 4 layers38 × 49 mm
NDS TV OUT V1I2
LNH-team/Lost-NDS-TV
The Lost Nintendo DS Television Output, brought back to life
48 parts488GPL-3.0
Questions
How big is the Pixel pump ui board panel PCB?
It measures 153.2 × 131.6 mm and has 4 copper layers, 1.59 mm thick.
What parts does the Pixel pump ui board panel use?
384 parts, built around the WS2812B-2020, B3U-1000P and SM10B-SRSS-TB(LF)(SN). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Pixel pump ui board panel KiCad files?
From the robin7331/pixel-pump-ui-board repository on GitHub, at the commit this page was made from: the board is output/pixel-pump-ui-board-panel.kicad_pcb and its schematic pixel-pump-ui-board.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Pixel pump ui board panel design in my own project?
Its repository states no licence, so its author keeps all rights: ask robin7331 before reusing the design.