4 layers77.5 × 42.5 mm
2 layers116.5 × 57 mm
MotorDriverBoard v2
robertpuccinelli/pcb_czbRandom PCB designs from mini projects at czb
- Size
- 116.5 × 57 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 126
- Nets
- 153
- Pads
- 558
- Tracks, vias
- 2,983, 217
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 14 Jul 2023
- Updated
- 14 Jul 2023
Overview
MotorDriverBoard v2 is an open-source printed circuit board by robertpuccinelli, from the robertpuccinelli/pcb_czb repository on GitHub. It is a 2-layer board of 116.5 × 57 mm with 126 parts on 153 nets, routed with 2,983 tracks and 217 vias.
It is built around the DRV8833RTYR, AP6503SP and MCP3008-I/P, with the CBT3245AD, 74LVC2G14GW and TXB0102DCU among its other parts. Its parts include 36 resistors, 29 capacitors, 17 transistors, 13 ICs and 13 diodes.
Main components
6
DRV8833RTYR
QFN-16-EP(4x4)-40℃~+85℃ 1.5A 2 2.7V~10.8V 2.7V~10.8V 360mΩ Bipolar Driver Yes QFN-16-EP(4x4) Stepper Motor Driver ROHSTexas InstrumentsStepper Motor Driver
AP6503SP
SOP-8-EP-40℃~+85℃ 1 340kHz 3A 4.7V~23V 600uA 925mV~20V Adjustable Buck Built-in Overcurrent Protection、Adjustable soft-start、Cycle-by-cycle current limiting、External compensation Step-down type Yes SOP-8-EP DC-DC Converters ROHSDiodes IncorporatedDC-DC Converters
MCP3008-I/P
PDIP-16-40℃~+85℃ 1.35MHz~3.6MHz 10 1LSB 2.7V~5.5V 200kHz 5nA 61dB 8 Multiplexers SAR SPI Yes PDIP-16 Analog to Digital Converters (ADC) ROHSMicrochip TechnologyAnalog To Digital Converters (ADC)
CBT3245AD
SO-20-300mil-40℃~+85℃ 0.25ns@5V,50pF 1uA 4V~5.5V Output enable high-impedance Single Supply SO-20-300mil Signal Switches, Multiplexers, Decoders ROHSNexperiaSignal Switches / Encoders & Decoders / Multiplexers
74LVC2G14GW
SC-70-6(SOT-363)-40℃~+125℃ 1.5V~3.6V 1.65V~5.5V 2 2 250mV~1.2V 32mA 32mA 4.7ns@5V,50pF 4uA 74LVC Schmitt trigger 电源关断保护、噪声抑制功能 SC-70-6(SOT-363) Inverters ROHSNexperiaInverters
TXB0102DCU
VSSOP-8-0.5mm-40℃~+85℃ 1 1.2V~3.6V 1.65V~5.5V 100Mbps 2 Auto Direction Detection Bidirectional CMOS CMOS Tri-State VSSOP-8-0.5mm Translators, Level Shifters ROHSTexas InstrumentsTranslators, Level Shifters
Parts
126| Qty | Value | Footprint | References |
|---|---|---|---|
| 17 | Q_NMOS_GSD | Package_TO_SOT_SMD:SOT-23 | Q1, Q2, Q3, Q4, Q5, Q6, Q7, Q8, Q10, Q11, Q12, Q13, Q14, Q15, Q16, Q17 +1 |
| 16 | 5k | Resistor_SMD:R_0603_1608Metric | R13, R14, R15, R16, R17, R18, R19, R20, R21, R22, R23, R32, R33, R34, R40, R42 |
| 12 | LED | LED_SMD:LED_0603_1608Metric | D1, D2, D4, D5, D6, D7, D8, D9, D10, D11, D12, D13 |
| 9 | 100nF | Capacitor_SMD:C_0603_1608Metric | C13, C14, C15, C16, C17, C26, C27, C30, C31 |
| 8 | 50m | Resistor_SMD:R_1206_3216Metric | R5, R6, R7, R8, R9, R10, R11, R12 |
| 6 | 10nF | Capacitor_SMD:C_0603_1608Metric | C9, C10, C11, C12, C18, C19 |
| 4 | 10uF | Capacitor_SMD:C_0805_2012Metric | C2, C4, C6, C8 |
| 4 | 2.2uF | Capacitor_SMD:C_0603_1608Metric | C1, C3, C5, C7 |
| 4 | 50k | Resistor_SMD:R_0603_1608Metric | R1, R2, R3, R4 |
| 4 | 6.8nF | Capacitor_SMD:C_0603_1608Metric | C22, C23, C24, C25 |
| 4 | DRV8833RTY | Package_DFN_QFN:Texas_S-PWQFN-N16_EP2.1x2.1mm_ThermalVias | U1, U2, U3, U4 |
| 3 | 100k | Resistor_SMD:R_0603_1608Metric | R24, R25, R27 |
| 3 | MountingHole | MountingHole:MountingHole_2.2mm_M2 | H1, H2, H3 |
| 2 | 10k | Resistor_SMD:R_0603_1608Metric | R29, R31 |
| 2 | 22uF | Capacitor_SMD:C_0805_2012Metric | C20, C21 |
| 2 | 6k8 | Resistor_SMD:R_0603_1608Metric | R28, R30 |
| 2 | AP6503 | Package_SO:Diodes_SO-8EP | U11, U12 |
| 2 | CBT3245A | Package_DFN_QFN:WQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x2.9mm | U6, U7 |
| 2 | INA4180 | Package_SO:TSSOP-14_4.4x5mm_P0.65mm | U8, U9 |
| 2 | Stepper_I2C | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-4-3.5-H_1x04_P3.50mm_Horizontal | J1, J6 |
| 1 | 10uH | Inductor_SMD:L_Wuerth_WE-PD-Typ-LS_Handsoldering | L1 |
| 1 | 15uH | Inductor_SMD:L_Wuerth_WE-PD-Typ-LS_Handsoldering | L2 |
| 1 | 2Fwd | TestPoint:TestPoint_Pad_D1.0mm | TP3 |
| 1 | 2Rev | TestPoint:TestPoint_Pad_D1.0mm | TP4 |
| 1 | 45k3 | Resistor_SMD:R_0603_1608Metric | R26 |
| 1 | 74LVC2G14 | Package_TO_SOT_SMD:SOT-363_SC-70-6 | U10 |
| 1 | D | Diode_SMD:D_SOD-123F | D3 |
| 1 | DC_Connector | Connector:RP13A-12RC-20PB | J5 |
| 1 | InvPwmF | TestPoint:TestPoint_Pad_D1.0mm | TP1 |
| 1 | InvPwmR | TestPoint:TestPoint_Pad_D1.0mm | TP2 |
| 1 | MCP3008 | Package_SO:SOIC-16_3.9x9.9mm_P1.27mm | U5 |
| 1 | Pause_Connector | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal | J9 |
| 1 | Pi_Header | Connector_PinSocket_2.54mm:PinSocket_2x20_P2.54mm_Vertical | J4 |
| 1 | Power_Connector | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J2 |
| 1 | Run_Connector | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-8-3.5-H_1x08_P3.50mm_Horizontal | J8 |
| 1 | Solenoid_Connector | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J3 |
| 1 | TXB0102DCU | Package_SO:VSSOP-8_2.4x2.1mm_P0.5mm | U13 |
| 1 | Toggle_Connector | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J7 |
More from robertpuccinelli/pcb_czb
3- 2 layers53.3 × 66 mm
- 2 layers36 × 20.5 mm
Capper Decapper Solenoid Correction
robertpuccinelli/pcb_czb
Random PCB designs from mini projects at czb
8 parts
Similar boards
- 4 layers94.3 × 52.8 mm
Jetbot mini
NVIDIA-AI-IOT/jetbot_mini
While developing the schematic and layout designs, I used some footprints from SnapEDA; in order to avoid dealing with licensing issues, I will not redistribute those files on this Github and instead link to where you…
188 parts23 - 4 layers90 × 65 mm
M1s fpga playground
tomek-szczesny/m1s-fpga-playground
An add-on board with FPGA for ODROID M1S.
188 parts2GPL-3.0 - 2 layers420.4 × 260.4 mm
I281 mainboard
brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.
157 parts1 - 2 layers12 × 19.5 mm
- 2 layers69 × 72 mm
MMv3
MrCroesus/MMv3
MMv3 is the 3rd generation robot platform used to teach the IEEE Micromouse DeCal at UC Berkeley. It was designed with usability, manufacturability, size, and cost in mind.
47 parts16Apache-2.0 - 4 layers45.8 × 30.4 mm
Battle bot pcb
MarkusVLA/robot-controller
150g combat robot controller PCB and firmware
66 parts3Apache-2.0 - 4 layers60 × 40 mm
RCcar
jeffreydthompson/Open_Roadster
Support files for course creating BLE remote controlled car from scratch.
95 parts1 - 2 layers80 × 117.3 mm
Questions
How big is the MotorDriverBoard v2 PCB?
It measures 116.5 × 57 mm and has 2 copper layers, 1.6 mm thick.
What parts does the MotorDriverBoard v2 use?
126 parts, built around the DRV8833RTYR, AP6503SP, MCP3008-I/P and CBT3245AD. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MotorDriverBoard v2 KiCad files?
From the robertpuccinelli/pcb_czb repository on GitHub, at the commit this page was made from: the board is CapperDecapper/Capper Decapper v2/MotorDriverBoard_v2.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the MotorDriverBoard v2 design in my own project?
Its repository states no licence, so its author keeps all rights: ask robertpuccinelli before reusing the design.