
I281 dmem
brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.
I281 mainboard is an open-source printed circuit board by brandtdamman, from the brandtdamman/i281e-cpu repository on GitHub. It is a 2-layer board of 420.4 × 260.4 mm with 157 parts on 209 nets, routed with 4,922 tracks and 326 vias.
It is built around the 74LS245SC, AP6503SP and 74LS32SC. Its parts include 33 connectors, 21 resistors, 9 capacitors, 3 ICs and 1 inductor. It belongs with the computers and single-board computers boards of this library.

Developed by i281e Development Group (formerly SDMAY24-14 Senior Design) under Dr. Alexander Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.
Built off the ideas of MIPS processors, the i281e CPU is an 8-bit computer that can execute instructions in a single cycle. This repository houses all the final materials of the project including KiCAD projects, microcode scripts, and supplemental documentation.
Orignal information regarding the i281e CPU project can be found on the Senior Design website.
The i281e Development Group spun off from Iowa State University. During the 2023-2024 academic year, an Electrical and Computer Engineering (ECpE) Senior Design project was proposed by Dr. Alexander Stoytchev to implement his i281 processor into an independent hardware solution. This design was improved upon creating the aforementioned i281e CPU.
The members of the i281e Development Group are listed in the included AUTHORS file.
In 2018, Dr. Alexander Stoytchev and Kyung-Tae J. Kim began development on a MIPS-based, single cycle processor that could be taught in CPR E 281 (now CPR E 2810) at Iowa State University. By Summer 2019, a finished implementation of the processor was developed for the Altera DE2-115 FPGA boards. Curriculum was written for the following Fall semester. During the Fall 2019 semester, the i281 CPU was unveiled to the class to show the culmination of the skills learned throughout the semester.
In Fall 2020, Dr. Stoytchev submitted a project proposal for ECpE Senior Design to develop a web simulation of the i281 CPU. This simulator would make interacting with the processor significantly easier, especially if Altera boards were inaccessible or otherwise occupied by other students. A group of six students were formed into sdmay21-38 to develop the web simulator.
| Primary Degree | Member Name |
|---|---|
| Computer Engineering | Aiman Priester |
| Eric Marcanio | |
| Bryce Snell | |
| Brady Kolosik | |
| Jacob Betsworth | |
| Software Engineering | Colby McKinley |
Table - Former i281 Web Simulator project members
The i281 CPU is still taught in CPR E 2810 classes to this day; however, it has a far grander potential waiting to be possessed. Was it possible to simply produce the i281 CPU into an independent physical device? In Spring 2022, another Senior Design team (sddec22-20) was formed. An effort was made to take the original design of the i281 CPU and produce a physical device. The goal was to make a breadboard version first to ensure logic was correct and sound.
| Primary Degree | Member Name |
|---|---|
| Software Engineering | Saffron Edwards |
| Electrical Engineering | Joseph De Jong |
| Alex Kiefer | |
| Patrick O’Brien | |
| Computer Engineering | David Vachlon |
Table - Former i281 CPU Hardware Implementation members
Unfortunately, time was not an ally with the previous team and while a breadboard implementation was finished by December 2022, it had some fundamental flaws that hindered it from going further. This repository and project are where the history continues.
The original i281 CPU design was developed under the MIT License by Kyung-Tae J. Kim and Dr. Alexander Stoytchev. The hardware and software source files for the original i281 CPU can be found here (https://www.ece.iastate.edu/~alexs/classes/i281_CPU/).
Hardware, including printed circuit board designs, CAD files, and relevant files, is licensed under CERN-OHL-P v2.
Logo and relevant components are restricted for use by the i281e Development Group (see Branding License and Terms).
All other source files and documentation herein are licensed under MIT License in their respective folders.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 26 | MountingHole | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H10, H11, H12, H13, H14, H15, H16, H17, H18, H19, H20, H21, H22, H23 +10 |
| 14 | 100 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R8, R9, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 |
| 3 | 0.1uF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1, C3, C6 |
| 2 | 0.1uF | Capacitor_THT:C_Disc_D5.0mm_W2.5mm_P5.00mm | C8, C9 |
| 2 | LOGO | Graphics:i281e_logo_large | G1, G2 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3 |
| 1 | 100uF | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C7 |
| 1 | 10K | Resistor_THT:R_Array_SIP9 | RN1 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R5 |
| 1 | 10uH | Inductor_SMD:L_Coilcraft_LPS5030 | L1 |
| 1 | 12V In | Connector_BarrelJack:BarrelJack_Horizontal | J44 |
| 1 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R2 |
| 1 | 22uF | Capacitor_SMD:CP_Elec_4x4.5 | C2 |
| 1 | 2A | Fuse:Fuseholder_Cylinder-5x20mm_Bulgin_FX0457_Horizontal_Closed | F1 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R6 |
| 1 | 330 | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P7.62mm_Horizontal | R1 |
| 1 | 45.3k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R4 |
| 1 | 47uF | Capacitor_SMD:CP_Elec_6.3x7.7 | C4 |
| 1 | 6.8k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R7 |
| 1 | 6.8nF | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C5 |
| 1 | 74LS245 | Package_DIP:DIP-20_W7.62mm_Socket | U2 |
| 1 | 74LS32 | Package_DIP:DIP-14_W7.62mm_Socket | U3 |
| 1 | ALU (FLAG) | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | B6J1 |
| 1 | ALU (OUT) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B5J1 |
| 1 | ALU CTRL | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J32 |
| 1 | ALU Input A | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B2J2 |
| 1 | ALU Input B | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B4J2 |
| 1 | ALU PWR | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J20 |
| 1 | AP6503 | Package_SO:Diodes_SO-8EP | U1 |
| 1 | BREADBOARD PWR | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J45 |
| 1 | BUS CONN 1 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 1 | BUS CONN 10 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J10 |
| 1 | BUS CONN 11 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J11 |
| 1 | BUS CONN 12 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J12 |
| 1 | BUS CONN 13 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J13 |
| 1 | BUS CONN 14 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J14 |
| 1 | BUS CONN 2 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J2 |
| 1 | BUS CONN 3 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J3 |
| 1 | BUS CONN 4 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J4 |
| 1 | BUS CONN 5 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J5 |
| 1 | BUS CONN 6 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J6 |
| 1 | BUS CONN 7 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J7 |
| 1 | BUS CONN 8 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J8 |
| 1 | BUS CONN 9 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J9 |
| 1 | C11 MUX | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J36 |
| 1 | C11 MUX (OUT) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B4J1 |
| 1 | C11 MUX (S0) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B3J2 |
| 1 | C11 MUX (S1) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B8J1 |
| 1 | C11MUX PWR | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J21 |
| 1 | C15 MUX | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J37 |
| 1 | C15 MUX (OUT) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B10J1 |
| 1 | C15 MUX (S0) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B5J2 |
| 1 | C15 MUX (S1) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B8J2 |
| 1 | C15MUX PWR | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J23 |
| 1 | C16 MUX | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J38 |
| 1 | C16 MUX (OUT) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B11J1 |
| 1 | C16 MUX (S0) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B3J4 |
| 1 | C16 MUX (S1) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B14J1 |
| 1 | C16MUX PWR | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J22 |
| 1 | C18 MUX | Connector_PinSocket_2.54mm:PinSocket_1x01_P2.54mm_Vertical | J39 |
| 1 | C18 MUX (OUT) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B13J1 |
| 1 | C18 MUX (S0) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B10J3 |
| 1 | C18 MUX (S1) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B12J2 |
| 1 | C18MUX PWR | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J24 |
| 1 | CF Signal Stub | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J30 |
| 1 | CMEM (IN) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B10J4 |
| 1 | CMEM (Instruction) | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | BIJ1 |
| 1 | CMEM (PC) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B9J1 |
| 1 | CMEM (Switch Input) | Connector_PinSocket_2.54mm:PinSocket_1x16_P2.54mm_Vertical | BSWJ1 |
| 1 | CMEM (WB P1) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B3J3 |
| 1 | CMEM CTRL | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J29 |
| 1 | CMEM PWR | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J15 |
| 1 | CTRL (FLAG) | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | B6J2 |
| 1 | CTRL (OPCODE) | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | B1J1 |
| 1 | CTRL 0-7 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J26 |
| 1 | CTRL 16-23 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J34 |
| 1 | CTRL 8-15 | Connector_PinSocket_2.54mm:PinSocket_1x08_P2.54mm_Vertical | J33 |
| 1 | CTRL PWR | Connector_PinSocket_2.54mm:PinSocket_1x04_P2.54mm_Vertical | J17 |
| 1 | CTRLSIG1 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | CJ1 |
| 1 | CTRLSIG2 | Connector_PinHeader_2.54mm:PinHeader_1x08_P2.54mm_Vertical | CJ2 |
The 122 most common of 157 parts.

brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

brandtdamman/i281e-cpu
Developed by SDMAY24-14 Senior Design group under Dr. Stoytchev, the i281e CPU is an extended design from the original i281 CPU for educational purposes.

NVIDIA-AI-IOT/jetbot_mini
While developing the schematic and layout designs, I used some footprints from SnapEDA; in order to avoid dealing with licensing issues, I will not redistribute those files on this Github and instead link to where you…

tomek-szczesny/m1s-fpga-playground
An add-on board with FPGA for ODROID M1S.




mudmin/AnotherMaker
This is where I will store code snippets for AnotherMaker Videos

The-Invent0r/8-bit-Computer-PCB
These are the KiCAD files for my 8-Bit Computer.

tjboldt/Apple2-IO-RPi
Apple II expansion card using a Raspberry Pi for I/O
It measures 420.4 × 260.4 mm and has 2 copper layers, 1.6 mm thick.
157 parts, built around the 74LS245SC, AP6503SP and 74LS32SC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the brandtdamman/i281e-cpu repository on GitHub, at the commit this page was made from: the board is hardware/kicad_pcb/i281_mainboard/i281_mainboard.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask brandtdamman before reusing the design.