
LPC176x MultiFunction
RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading
QuadUncoupler is an open-source printed circuit board by RobertPHeller, from the RobertPHeller/RPi-RRCircuits repository on GitHub. It is a 2-layer board of 69.9 × 101.6 mm with 55 parts on 46 nets, routed with 297 tracks and 4 vias.
It is built around the MCT6H, 6A05-T and TIP120. Its parts include 20 resistors, 8 capacitors, 4 ICs, 4 diodes and 4 transistors. It belongs with the ESP32 boards of this library.
This is a SMD variant of 16DriverOutputHAT.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1K Ohms | R1 | R4, R5, R6, R9, R11, R12, R13, R14, R15, R16, R18, R20 |
| 4 | RPi_Hat:RPi_Hat_Mounting_Hole | H2, H2, H2, H2 | |
| 4 | 10 pf | C1 | C1, C2, C3, C7 |
| 4 | 10 uf, 50V | C1V5 | C4, C5, C6, C8 |
| 4 | 270 Ohms | R1 | R1, R2, R3, R19 |
| 4 | 500K Ohms | RV2 | RV1, RV2, RV3, RV4 |
| 4 | 510K Ohms | R1 | R7, R8, R10, R17 |
| 4 | 6A05-T | D4 | D1, D2, D3, D4 |
| 4 | TIP120 | TO220_VERT | Q1, Q2, Q3, Q4 |
| 2 | LM556 | DIP-14__300 | U1, U2 |
| 2 | MCT6H | DIP-8__300 | IC1, IC2 |
| 1 | DWSLogoBCU | ||
| 1 | GPIO | ScrewTerm_2.54-10 | T6 |
| 1 | Power | bornier2 | T5 |
| 1 | Uncoupler 1 | bornier4 | T1 |
| 1 | Uncoupler 2 | bornier4 | T2 |
| 1 | Uncoupler 3 | bornier4 | T3 |
| 1 | Uncoupler 4 | bornier4 | T4 |

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading

RobertPHeller/RPi-RRCircuits
A collection of circuit designs for various MCUs, not just Raspberry Pis relating to Model Railroading



robsonsmartins/usbflashprog
A memory device programmer (Flash/EPROM/E2PROM) board and software, connected to PC by USB port.

dcpedit/mission-control
Modern replacement PCB for the IBM Model M 122

RudgeLab/FluoPi
Code and teaching materials for UC/BackyardBrains raspberry pi "macro" scope.

jones139/catocam
Uses a custom trained YoloV8 model on a Raspberry Pi to Detect Cats in CCTV images and Unleash a Cat Deterrent

dcpedit/taptap
TapTap is a solenoid breakout board for those who are interested in adding a solenoid to their existing project. All you need are the following components, and an extra data pin on your microcontroller.

It measures 69.9 × 101.6 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the MCT6H, 6A05-T and TIP120. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the RobertPHeller/RPi-RRCircuits repository on GitHub, at the commit this page was made from: the board is QuadUncoupler/QuadUncoupler.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask RobertPHeller before reusing the design.