
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

A Macropad made with the KB2040 MCU
RP2040-Macropad is an open-source printed circuit board by rmranjitkarNULL, from the rmranjitkarNULL/RP2040-Macropad repository on GitHub. It is a 2-layer board of 86.2 × 86.4 mm with 55 parts on 46 nets, routed with 45 tracks and 0 vias.
It is built around the 1N4148W. Its parts include 23 diodes, 12 switches, 11 capacitors, 3 resistors and 1 IC. It belongs with the keyboards and input boards and the RP2040 boards of this library.
A Macropad made with the KB2040 MCU
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D3, D4, D5, D6, D7, D8, D9, D10, D11, D12 |
| 11 | 100nf | Capacitor_SMD:C_0603_1608Metric | C1, C2, C3, C4, C5, C6, C7, C8, C9, C10, C11 |
| 11 | MX_SK6812MINI-E | PCM_marbastlib-mx:LED_MX_6028R | LED1, LED2, LED3, LED4, LED5, LED6, LED7, LED8, LED9, LED10, LED11 |
| 11 | SW_Push | PCM_Switch_Keyboard_Hotswap_Kailh:SW_Hotswap_Kailh_MX_1.00u | SW1, SW2, SW4, SW5, SW6, SW7, SW8, SW9, SW10, SW11, SW12 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 2 | 4k7 | Resistor_SMD:R_0603_1608Metric | R7, R8 |
| 1 | 128 x 32 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | SSD1306 |
| 1 | 330 | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | RotaryEncoder_Switch | Rotary_Encoder:RotaryEncoder_Alps_EC11E-Switch_Vertical_H20mm | SW3 |
| 1 | kb2040 | footprints:kb2040 | U1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

pierrechevalier83/ferris
A low profile split keyboard designed to satisfy one single use case elegantly



MickiusMousius/Rolio46Keyboard
A split wireless keyboard based on the Corne and Sofle


sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

It measures 86.2 × 86.4 mm and has 2 copper layers, 1.6 mm thick.
55 parts, built around the 1N4148W. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rmranjitkarNULL/RP2040-Macropad repository on GitHub, at the commit this page was made from: the board is RP2040_Macropad.kicad_pcb and its schematic RP2040_Macropad.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rmranjitkarNULL before reusing the design.