4 layers48 × 80 mm
8 layers100 × 102 mm
Zynqinator
rkarl2/Zynqinator1Test board for the Zyqn 7020
- Size
- 100 × 102 mm
- Copper layers
- 8
- Thickness
- 0.78 mm
- Parts
- 645
- Nets
- 699
- Pads
- 2,814
- Tracks, vias
- 9,499, 1,797
- Pours
- 84
- Routed
- Yes
- KiCad
- KiCad 9.0 (file 20241229)
- Created
- 17 Aug 2025
- Updated
- 10 Apr 2026
Overview
Zynqinator is an open-source printed circuit board by rkarl2, from the rkarl2/Zynqinator repository on GitHub, published under the AGPL-3.0 licence. It is an 8-layer board of 100 × 102 mm with 645 parts on 699 nets, routed with 9,499 tracks and 1,797 vias.
It is built around the 74LVC1G17Z, LM65645RZTR and TDP1204RNQR, with the A-MICROTF-1.85A, TCA9406DCT and FXMA108BQX among its other parts. Its parts include 282 resistors, 268 capacitors, 31 ICs, 14 connectors and 9 inductors. It belongs with the interfaces and adapters boards and the FPGA and CPLD boards of this library.
Main components
10
74LVC1G17Z
SOT-553-40℃~+125℃ 1 1 1.65V~5.5V 10uA 32mA 32mA 4.4ns@5V,15pF 74LVC Push-pull Schmitt trigger Unidirectional SOT-553 Buffers, Drivers, Receivers, Transceivers ROHSDiodes IncorporatedBuffers, Drivers, Receivers, Transceivers
LM65645RZTR
WQFN-FCRLF-20(2.5x3.5)-40℃~+150℃@(TJ) 1 2.5uA 3.3V、5V 300kHz~2.2MHz 3V~65V 4.5A Adjustable Buck Built-in Overcurrent Protection、Light load efficient mode、Operating status indication、Cycle-by-cycle current limiting、Frequency synchronization、Hiccup current limiting、Built-in LDO regulator、EMI optimization (spread spectrum) Step-down type Yes WQFN-FCRLF-20(2.5x3.5) DC-DC Converters ROHSTexas InstrumentsDC-DC Converters
TDP1204RNQR
WQFN-40(4x6)Video Interface ICsTexas Instruments
A-MICROTF-1.85A
SMD-25℃~+85℃ 1.85mm Connector and Ejector MicroSD Card (TF Card) Push-Push SMD SD Card / Memory Card Connector ROHSMyAntennaSD Card / Memory Card Connector
TCA9406DCT
SSOP82-Bit Bidirectional 1-MHz, I2C Bus and SMBus Voltage-Level Translator with 8-kV HBM ESDTexas InstrumentsUncategorised
FXMA108BQX
DQFN-20-EP(2.5x4.5)-40℃~+85℃ 1 1.65V~5.5V 1.65V~5.5V 100Mbps 8 Auto Direction Detection、Power-Off Protection Bidirectional Tri-State DQFN-20-EP(2.5x4.5) Translators, Level Shifters ROHSonsemiTranslators, Level Shifters
MT41K256M16TW-107:P
FBGA-96(8x14)0℃~+95℃ 1.283V~1.45V 15mA 32mA 4Gbit 933MHz Auto precharge function、Data mask function、Dynamic on-chip termination、ZQ calibration function、Asynchronous reset function、Write leveling function、Auto self-refresh DDR3L SDRAM FBGA-96(8x14) DDR SDRAM ROHSMicron TechDDR SDRAM
AP22816AKBWT
TSOT-23-5-40℃~+85℃ 1 1A 2.7V~5.5V 75mΩ Active High High Side Switch Short-Circuit Protection(SCP)、Overcurrent Protection(OCP)、Over Temperature Protection TSOT-23-5 Power Distribution Switches ROHSDiodes IncorporatedPower Distribution Switches
2N7002E
SOT-23-55℃~+150℃ 1 N-channel 2.5V 225mW 3.5Ω@5V 300mA 60V N-Channel SOT-23 MOSFETs ROHSSlkorMOSFETs
SFW15R-2STE1LF
SMD,P=1mm,卧贴-55℃~+105℃ 0.3mm 15P 1mm 2.7mm Phosphor bronze Slide Lock Surface Mount, Right Angle Tin Top Contact SMD,P=1mm,卧贴 FFC, FPC (Flat Flexible) Connector Assemblies ROHSAmphenolFFC, FPC (Flat Flexible) Connector Assemblies
README
README.mdZynq-7020 Vision Test Board
Test board for the Zynq 7020. This is mainly for my practice/learning more advanced pcb design.
Features:
- USB OTG (Host/Device)
- Ethernet
- On board Programming via JTAG
- HDMI RX
- HDMI TX
- 2x CSI-2 RX
- 1x CSI-2 TX
- 1 Gbit Flash
- SD Card
Schematics
Current Schematics here
Parts
645| Qty | Value | Footprint | References |
|---|---|---|---|
| 92 | 100n | Capacitor_SMD:C_0402_1005Metric | C1001, C1002, C1005, C1006, C1008, C1102, C1104, C1106, C1107, C1108, C1109, C1110, C1112, C1114, C1115, C1117 +76 |
| 38 | 470n | Capacitor_SMD:C_0402_1005Metric | C204, C207, C307, C308, C309, C310, C311, C312, C313, C314, C318, C319, C320, C321, C401, C403 +22 |
| 36 | 10k | Resistor_SMD:R_0402_1005Metric | R1101, R1301, R1302, R1405, R1407, R1430, R1431, R1511, R1515, R1517, R1518, R1521, R1522, R1611, R1615, R1617 +20 |
| 32 | 47n | Capacitor_SMD:C_0402_1005Metric | C503, C504, C505, C506, C507, C508, C509, C510, C511, C512, C513, C514, C515, C516, C517, C518 +16 |
| 31 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C203, C206, C303, C305, C306, C316, C317, C402, C405, C408, C412, C414, C1003, C1004, C1116, C1440 +15 |
| 30 | DNI | Resistor_SMD:R_0402_1005Metric | R807, R808, R809, R810, R811, R812, R813, R814, R815, R816, R817, R818, R820, R821, R822, R823 +14 |
| 24 | 1k | Resistor_SMD:R_0402_1005Metric | R1108, R1109, R1111, R1112, R1113, R1114, R1115, R1121, R1123, R1124, R1126, R1129, R1415, R1416, R1516, R1616 +8 |
| 24 | 40R | Resistor_SMD:R_0402_1005Metric | R407, R408, R409, R410, R411, R412, R413, R414, R415, R416, R417, R418, R419, R420, R421, R422 +8 |
| 21 | 0R | Resistor_SMD:R_0402_1005Metric | R201, R206, R218, R707, R708, R709, R1001, R1002, R1116, R1119, R1120, R1425, R1426, R1427, R1428, R1429 +5 |
| 19 | 100u | Capacitor_SMD:C_1210_3225Metric | C201, C205, C542, C543, C601, C1009, C1423, C1424, C1428, C1429, C1432, C1433, C1443, C1444, C1445, C1451 +3 |
| 18 | 1k6 | Resistor_SMD:R_0402_1005Metric | R1510, R1512, R1513, R1514, R1519, R1520, R1610, R1612, R1613, R1614, R1619, R1620, R1719, R1720, R1721, R1723 +2 |
| 16 | 4k7 | Resistor_SMD:R_0402_1005Metric | R403, R601, R603, R901, R902, R903, R1110, R1201, R1202, R1203, R1204, R1205, R1206, R1207, R1208, R1209 |
| 12 | 100R | Resistor_SMD:R_0402_1005Metric | R1501, R1502, R1503, R1504, R1505, R1506, R1601, R1602, R1603, R1604, R1605, R1606 |
| 12 | 150R | Resistor_SMD:R_0402_1005Metric | R1507, R1508, R1509, R1607, R1608, R1609, R1702, R1703, R1706, R1707, R1710, R1711 |
| 12 | 33R | Resistor_SMD:R_0402_1005Metric | R212, R213, R214, R215, R216, R217, R1102, R1103, R1104, R1105, R1106, R1107 |
| 11 | 1u | Capacitor_SMD:C_0805_2012Metric | C1007, C1414, C1416, C1417, C1418, C1425, C1426, C1427, C1430, C1441, C1446 |
| 11 | 47u | Capacitor_SMD:C_1210_3225Metric | C301, C302, C315, C540, C603, C619, C1119, C1120, C1506, C1606, C1705 |
| 10 | 4u7 | Capacitor_SMD:C_0805_2012Metric | C1401, C1402, C1403, C1404, C1405, C1406, C1431, C1434, C1435, C1436 |
| 9 | 100k | Resistor_SMD:R_0402_1005Metric | R1117, R1401, R1402, R1403, R1408, R1410, R1412, R1418, R1419 |
| 9 | ESD8104 | Package_DFN_QFN:Diodes_UDFN-10_1.0x2.5mm_P0.5mm | U701, U705, U801, U802, U804, U805, U807, U808, U1004 |
| 8 | 49.9R | Resistor_SMD:R_0201_0603Metric | R841, R842, R843, R844, R845, R846, R847, R848 |
| 7 | 10u | Capacitor_SMD:C_0805_2012Metric | C803, C812, C1101, C1103, C1105, C1113, C1118 |
| 7 | 20k | Resistor_SMD:R_0402_1005Metric | R202, R203, R204, R205, R207, R208, R209 |
| 7 | 220R | Resistor_SMD:R_0402_1005Metric | R604, R605, R1122, R1127, R1303, R1304, R1421 |
| 6 | 120R | Resistor_SMD:R_0402_1005Metric | R1713, R1714, R1715, R1716, R1717, R1718 |
| 6 | 60R | Resistor_SMD:R_0402_1005Metric | R1701, R1704, R1705, R1708, R1709, R1712 |
| 5 | 10n | Capacitor_SMD:C_0402_1005Metric | C208, C530, C531, C1111, C1422 |
| 5 | 120Ω @ 100 MHz | Capacitor_SMD:C_0603_1608Metric | L601, L701, L702, L1101, L1102 |
| 5 | 2.2n | Capacitor_SMD:C_0402_1005Metric | C1452, C1453, C1454, C1455, C1456 |
| 5 | 2N7002E | Package_TO_SOT_SMD:SOT-23 | Q1102, Q1103, Q1301, Q1302, Q1401 |
| 4 | 10pf | Capacitor_SMD:C_0402_1005Metric | C1447, C1448, C1449, C1450 |
| 4 | 1k8 | Resistor_SMD:R_0402_1005Metric | R804, R805, R819, R824 |
| 4 | 22R | Resistor_SMD:R_0402_1005Metric | R703, R704, R705, R706 |
| 4 | LM65645RZT | other:RZT0020A-MFG | U1401, U1402, U1403, U1405 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H101, H102, H103, H104 |
| 3 | 787R | Resistor_SMD:R_0402_1005Metric | R1414, R1417, R1422 |
| 3 | 80R | Resistor_SMD:R_0201_0603Metric | R401, R402, R406 |
| 3 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Horizontal | J1301, J1302, J1402 |
| 3 | Jumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_Pad1.0x1.5mm_NumberLabels | JP1501, JP1601, JP1701 |
| 3 | SFW15R-2STE1LF | Camera1:AMPHENOL_SFW15R-2STE1LF | J1501, J1601, J1701 |
| 3 | SN75DPHY440 | other:RHR28_TEX | U1502, U1602, U1701 |
| 3 | TCA9406DC | Package_SO:SSOP-8_2.95x2.8mm_P0.65mm | U1501, U1601, U1702 |
| 2 | 1.5u | Inductor_SMD:L_Bourns_SRP5030T | L1402, L1403 |
| 2 | 10k | Resistor_SMD:R_0201_0603Metric | R210, R211 |
| 2 | 1M | Resistor_SMD:R_0805_2012Metric | R806, R1125 |
| 2 | 1N4148 | Diode_SMD:D_SOD-123 | D1101, D1102 |
| 2 | 1n 250V | Capacitor_SMD:C_0805_2012Metric | C815, C1122 |
| 2 | 240R | Resistor_SMD:R_0402_1005Metric | R404, R405 |
| 2 | 3.3u | Inductor_SMD:L_Bourns_SRP5030T | L1401, L1404 |
| 2 | 47k | Resistor_SMD:R_0402_1005Metric | R801, R802 |
| 2 | FXMA108 | Package_DFN_QFN:WQFN-20-1EP_2.5x4.5mm_P0.5mm_EP1x2.9mm | U1301, U1302 |
| 2 | GREEN | LED_SMD:LED_0805_2012Metric | D601, D1302 |
| 2 | HDMI_A | Connector_Video:HDMI_A_Amphenol_10029449-x01xLF_Horizontal | J801, J802 |
| 2 | LTC6908-1 | Package_TO_SOT_SMD:TSOT-23-6 | U1407, U1408 |
| 2 | MT41K256M16TW-107 | dram:BGA96C80P9X16_1400X800X120_pinDelays | U401, U402 |
| 2 | RED | LED_SMD:LED_0805_2012Metric | D1301, D1401 |
| 2 | TDP1204RNQR | Package_DFN_QFN:Texas_RNQ0040A_WQFN-40-1EP_6x4mm_P0.4mm_EP4.7x2.7mm | U803, U806 |
| 2 | USB_B_Micro | Connector_USB:USB_Micro-B_Amphenol_10118193-0001LF_Horizontal | J702, J1002 |
| 1 | 115k | Resistor_SMD:R_0402_1005Metric | R1406 |
| 1 | 125mA | Fuse:Fuse_0805_2012Metric | F801 |
| 1 | 12k | Resistor_SMD:R_0402_1005Metric | R717 |
| 1 | 143k | Resistor_SMD:R_0402_1005Metric | R1411 |
| 1 | 17.5k | Resistor_SMD:R_0402_1005Metric | R1404 |
| 1 | 1k NP | Resistor_SMD:R_0402_1005Metric | R1128 |
| 1 | 249k | Resistor_SMD:R_0402_1005Metric | R1424 |
| 1 | 2k | Resistor_SMD:R_0402_1005Metric | R719 |
| 1 | 31.6k | Resistor_SMD:R_0402_1005Metric | R1420 |
| 1 | 330u | Capacitor_SMD:C_1210_3225Metric | C633 |
| 1 | 402k | Resistor_SMD:R_0402_1005Metric | R1409 |
| 1 | 45.3k | Resistor_SMD:R_0402_1005Metric | R1423 |
| 1 | 6k04 1% | Resistor_SMD:R_0402_1005Metric | R1118 |
| 1 | 74AUC1G07 | Package_TO_SOT_SMD:SOT-23-5 | U706 |
| 1 | 74LVC1G17 | Package_TO_SOT_SMD:Texas_R-PDSO-G5_DCK-5 | U1406 |
| 1 | 80k | Resistor_SMD:R_0402_1005Metric | R1413 |
| 1 | 93LCxxB | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U704 |
| 1 | A-MicroTF-1.85A | Connector_Card:microSD_HC_Molex_47219-2001 | J901 |
| 1 | AP22816AKBWT | Package_TO_SOT_SMD:SOT-23-5 | U1003 |
| 1 | Barrel_Jack | Connector_BarrelJack:BarrelJack_GCT_DCJ200-10-A_Horizontal | J1401 |
| 1 | Conn_01x06 | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J1303 |
| 1 | Conn_01x06_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J701 |
The 623 most common of 645 parts.
Similar boards
- 4 layers86.2 × 56.2 mm
- 2 layers78 × 37.5 mm
- 4 layers71.8 × 66 mm
Minimal carrier board for CM4 rev E
RobertLukan/rpi-cm4-custom-board
Based on my previous projects I needed a customized RPI4 carrier board with 2 cameras input. The initial idea was taken from this project…
45 parts8 - 4 layers86.2 × 56.2 mm
- 4 layers257 × 117.5 mm
Teacup carrier
thingino/teacup-neo
Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.
157 parts1GPL-3.0 - 2 layers30.1 × 31.2 mm
CMIO DSI Adapter
Mimoja/RPI5-DSI-ST7701-Adapter
An adapter board for DSI boards that have direct LED connection and need a reset pin
9 parts - 4 layers95.9 × 90.2 mm
Cubesat orin nano carrier
ngrabbs/ember
Open pvpanel.kicadpro with KiCad 10. The project contains the recovered schematic, routed PCB, project-local footprint libraries, and solar-module STEP model.
87 parts1CC0-1.0
Questions
How big is the Zynqinator PCB?
It measures 100 × 102 mm and has 8 copper layers, 0.78 mm thick.
What parts does the Zynqinator use?
645 parts, built around the 74LVC1G17Z, LM65645RZTR, TDP1204RNQR and A-MICROTF-1.85A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Zynqinator KiCad files?
From the rkarl2/Zynqinator repository on GitHub, at the commit this page was made from: the board is pcb/Zynqinator/Zynqinator.kicad_pcb and its schematic pcb/Zynqinator/Boot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Zynqinator design in my own project?
Its repository publishes it under the AGPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).