4 layers86.2 × 56.2 mm
2 layers30.1 × 31.2 mm
CMIO DSI Adapter
Mimoja/RPI5-DSI-ST7701-AdapterAn adapter board for DSI boards that have direct LED connection and need a reset pin
- Size
- 30.1 × 31.2 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 9
- Nets
- 21
- Pads
- 57
- Tracks, vias
- 149, 95
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 23 Dec 2024
- Updated
- 23 Dec 2024
Overview
CMIO DSI Adapter is an open-source printed circuit board by Mimoja, from the Mimoja/RPI5-DSI-ST7701-Adapter repository on GitHub. It is a 2-layer board of 30.1 × 31.2 mm with 9 parts on 21 nets, routed with 149 tracks and 95 vias.
It is built around the SFW15R-2STE1LF. It belongs with the interfaces and adapters boards of this library.
Main components
1Parts
9| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 545482271 | footprints:CONN_54548-2271_MOL | J2 |
| 1 | Conn_01x05_Pin | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J3 |
| 1 | LEDA | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | Reset | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
| 1 | SCL | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | SDA | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | SFW15R-2STE1LF | footprints:CON15_1X15_DRB_SFW_FCI | J1 |
| 1 | VCC | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
The 8 most common of 9 parts.
Similar boards
- 2 layers78 × 37.5 mm
- 4 layers71.8 × 66 mm
Minimal carrier board for CM4 rev E
RobertLukan/rpi-cm4-custom-board
Based on my previous projects I needed a customized RPI4 carrier board with 2 cameras input. The initial idea was taken from this project…
45 parts8 - 4 layers86.2 × 56.2 mm
- 8 layers100 × 102 mm
- 4 layers257 × 117.5 mm
Teacup carrier
thingino/teacup-neo
Universal Ingenic SoC development platform: one carrier + per-SoC interposer modules (T10 through A1, any package) on a DDR4 card edge, with an ESP32-S3 BMC for autonomous LLM-driven development.
157 parts1GPL-3.0 - 4 layers95.9 × 90.2 mm
Cubesat orin nano carrier
ngrabbs/ember
Open pvpanel.kicadpro with KiCad 10. The project contains the recovered schematic, routed PCB, project-local footprint libraries, and solar-module STEP model.
87 parts1CC0-1.0 - 2 layers103 × 30.5 mm
Questions
How big is the CMIO DSI Adapter PCB?
It measures 30.1 × 31.2 mm and has 2 copper layers, 1.6 mm thick.
What parts does the CMIO DSI Adapter use?
9 parts, built around the SFW15R-2STE1LF. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the CMIO DSI Adapter KiCad files?
From the Mimoja/RPI5-DSI-ST7701-Adapter repository on GitHub, at the commit this page was made from: the board is CMIO-DSI-Adapter.kicad_pcb and its schematic CMIO-DSI-Adapter.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the CMIO DSI Adapter design in my own project?
Its repository states no licence, so its author keeps all rights: ask Mimoja before reusing the design.