
VECTRON V1
arudhranpk/VECTRON_V1
This is a custom made flight computer designed for sounding rockets.

Thumb keyboard is an open-source printed circuit board by rileytuttle, from the rileytuttle/thummingboard-pcb repository on GitHub. It is a 2-layer board of 144 × 60 mm with 201 parts on 91 nets, routed with 1,393 tracks and 113 vias.
It is built around the B3F-1000, 1N4148W and WS2812B, with the SSSS811101 among its other parts. Its parts include 123 switches, 67 diodes, 1 IC and 1 connector. It belongs with the keyboards and input boards and the nRF52 and nRF5x boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 61 | B3F-1000 | B3F_1000:SW_B3F-1000 | S100, S101, S102, S103, S104, S105, S106, S107, S108, S109, S110, S111, S112, S113, S114, S115 +45 |
| 60 | 1N4148W | Diode_SMD:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +44 |
| 60 | PTS526 SK15 SMTR2 LFS | lowproswitch:SMT_FS | S2, S10, S11, S12, S13, S14, S15, S16, S17, S18, S19, S20, S21, S22, S23, S122 +44 |
| 7 | WS2812B | 1655:LED_1655 | D61, D62, D63, D64, D65, D66, D67 |
| 5 | MountingHole_2.2mm_M2 | MountingHole:MountingHole_2.2mm_M2 | BATT STANDOFF, MH1, MH2, MH3, MH4 |
| 1 | Conn_01x02_Socket | Connector_JST:JST_PH_S2B-PH-K_1x02_P2.00mm_Horizontal | J1 |
| 1 | ESC | lowproswitch:SMT_FS | S1 |
| 1 | LOGO | thummingbirdlogo:thummingbird | G*** |
| 1 | SSSS811101 | SSSS811101:SW_SSSS811101 | S121 |
| 1 | SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JumpIfNoFrontLED |
| 1 | SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm_Relief | Connector_Wire:SolderWire-0.1sqmm_1x02_P3.6mm_D0.4mm_OD1mm_Relief | GND - POS |
| 1 | nice_nano | nice-nano-kicad:nice_nano | U1 |
The 200 most common of 201 parts.

arudhranpk/VECTRON_V1
This is a custom made flight computer designed for sounding rockets.






fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

It measures 144 × 60 mm and has 2 copper layers, 1.6 mm thick.
201 parts, built around the B3F-1000, 1N4148W, WS2812B and SSSS811101. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rileytuttle/thummingboard-pcb repository on GitHub, at the commit this page was made from: the board is thumb-keyboard/thumb-keyboard.kicad_pcb and its schematic thumb-keyboard/thumb-keyboard.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rileytuttle before reusing the design.