Skip to the content
2 layers86 × 70 mmCATS, the printed circuit board in 3D

An ESP32 system to add some spark into my '00 Z3M

Size
86 × 70 mm
Copper layers
2
Thickness
1.6 mm
Parts
30
Nets
58
Pads
143
Tracks, vias
170, 0
Pours
1
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Sep 2026
Updated
26 Sep 2026

Parts

30
QtyValueFootprintReferences
310KResistor_SMD:R_1206_3216MetricR8, R9, R10
3MountingHole_2.2mm_M2MountingHole:MountingHole_2.2mm_M2, ,
210RResistor_SMD:R_1206_3216MetricR3, R4
247pFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC4, C5
2Conn_01x05Connector_JST:JST_XH_B5B-XH-A_1x05_P2.50mm_VerticalJ6, J7
10.1uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC8
10RResistor_SMD:R_1206_3216MetricR1
1100nFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC2
110uFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1
14K7Resistor_SMD:R_1206_3216MetricR2
1BME-680!Personal:BME-680U6
1Barrel_Jack!Personal:BarrelJack_HorizontalJ1
1Buzzer!Personal:Passive BuzzerBZ1
1Conn_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_MKDS-1,5-2_1x02_P5.00mm_HorizontalJ4
1Conn_01x03Connector_JST:JST_XH_B3B-XH-A_1x03_P2.50mm_VerticalJ2
1Conn_01x04Connector_JST:JST_XH_B4B-XH-A_1x04_P2.50mm_VerticalJ5
1Conn_01x07Connector_JST:JST_XH_B7B-XH-A_1x07_P2.50mm_VerticalJ3
1ESP32-S3-DevKitM-1-N8!Personal:ESP32-S3-DevKitM-1-N8U1
1MP1584EN!Personal:MP1584EN_DCDC_THT_ModuleU2
1MPU-6050!Personal:MPU-6500U8
1Micro_SD_Card!Personal:Micro_SD_CardU5
1PESD5V0L2BTPackage_TO_SOT_SMD:SOT-23D8
1SN65HVD230Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU4

More from rickwargo/CATS

4
  • 2 layers75.6 × 64.1 mmK Line, the printed circuit board in 3D

    K Line

    rickwargo/CATS

    An ESP32 system to add some spark into my '00 Z3M

    61 parts
  • 2 layers117.1 × 86 mmGears, the printed circuit board in 3D

    Gears

    rickwargo/CATS

    An ESP32 system to add some spark into my '00 Z3M

    20 parts
  • 2 layers35 × 50 mmSwitcher, the printed circuit board in 3D

    Switcher

    rickwargo/CATS

    An ESP32 system to add some spark into my '00 Z3M

    19 parts
  • 2 layers20 × 15 mmEncoder Button, the printed circuit board in 3D

    Encoder Button

    rickwargo/CATS

    An ESP32 system to add some spark into my '00 Z3M

    2 parts

Similar boards

  • 2 layers61 × 177.8 mmMotor control + ESP, the printed circuit board in 3D

    Motor control + ESP

    Scramtv/ESD_P5

    Github repo for our group through fifth semester of Electronics and Systems design on AAU.

    16 parts
  • 2 layers95 × 100 mmDriver Carrier v2, the printed circuit board in 3D

    Driver Carrier v2

    Vinomakon/VEPR-Robotarm

    A personal robotics project bringing together a 3D-printed six-axis arm, custom motor-driver electronics, ESP32 firmware, and a Python desktop control panel.

    33 parts
  • 2 layers419.1 × 101.2 mmJayK, the printed circuit board in 3D

    JayK

    josuegaleas/JayK

    Full-size mechanical keyboard with USB-C and no lighting.

    207 parts13Apache-2.0
  • 4 layers111 × 171 mmNetwork and Switch, the printed circuit board in 3D

    Network and Switch

    AkshathRaghav/boilernet

    Code release for BoilerNet, demo'd at SPARK S'25 as a Purdue Senior Design Capstone. Associated PCB Design and 3D Prints within.

    108 parts3Apache-2.0
  • 4 layers100 × 100 mmPS BPSLeader, the printed circuit board in 3D

    PS BPSLeader

    lhr-solar/PS-BPSLeader

    Reads voltage, temperature, and current of the main battery pack from the Segment Monitoring Board and HV Carrier boards to ensure the battery remains in a safe state.

    388 parts3MIT
  • 8 layers134.5 × 107.2 mmArctic video, the printed circuit board in 3D

    Arctic video

    aerogull/arctic-video

    a wip pcie fpga card designed with video capture in mind

    265 parts1
  • 2 layers450 × 400 mmFULL BOARD SQ5, the printed circuit board in 3D

    FULL BOARD SQ5

    urichess/chessboard

    207 partsApache-2.0

Questions

How big is the CATS PCB?

It measures 86 × 70 mm and has 2 copper layers, 1.6 mm thick.

What parts does the CATS use?

30 parts, built around the ESP32-S3-DEVKITM-1-N8, SN65HVD230D, MP1584EN and MPU-6050. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the CATS KiCad files?

From the rickwargo/CATS repository on GitHub, at the commit this page was made from: the board is CATS.kicad_pcb and its schematic Blower Switch/Switcher.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the CATS design in my own project?

Its repository states no licence, so its author keeps all rights: ask rickwargo before reusing the design.