Skip to the content
2 layers75.6 × 64.1 mmK Line, the printed circuit board in 3D

An ESP32 system to add some spark into my '00 Z3M

Size
75.6 × 64.1 mm
Copper layers
2
Thickness
1.6 mm
Parts
61
Nets
55
Pads
152
Tracks, vias
85, 0
Routed
Yes
KiCad
KiCad 10.0 (file 20260206)
Created
26 Sep 2026
Updated
26 Sep 2026

Overview

K Line is an open-source printed circuit board by rickwargo, from the rickwargo/CATS repository on GitHub. It is a 2-layer board of 75.6 × 64.1 mm with 61 parts on 55 nets, routed with 85 tracks and 0 vias.

Its parts include 35 resistors, 11 diodes, 7 capacitors, 4 transistors and 3 ICs. It belongs with the ESP32 and RISC-V boards of this library.

Parts

61
QtyValueFootprintReferences
1610KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR6, R12, R15, R16, R18, R19, R21, R22, R24, R25, R27, R28, R30, R31, R33, R34
7100nFCapacitor_SMD:C_1206_3216Metric_Pad1.33x1.80mm_HandSolderC1, C2, C3, C4, C5, C6, C7
73K3Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR17, R20, R23, R26, R29, R32, R35
73V3 0.5WDiode_SMD:D_SOD-123FD5, D6, D7, D8, D9, D10, D11
4100RResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR1, R2, R7, R8
4Q_NMOS_GSDPackage_TO_SOT_SMD:SC-59_HandsolderingQ1, Q2, Q3, Q4
31KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR5, R11, R14
2220RResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR3, R9
2510RResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR4, R10
2LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD2, D4
2Red LEDLED_SMD:LED_1206_3216Metric_Pad1.42x1.75mm_HandSolderD1, D3
14.7KResistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolderR13
1Conn_01x10_PinConnector_JST:JST_XH_S10B-XH-A-1_1x10_P2.50mm_HorizontalJ1
1ER_OLEDM0.91_1x-I2CDisplay:ER_OLEDM0.91_1x-I2CU3
1ESP32-C3 SuperMini!Personal:ESP32-C3-SuperMiniU1
1Mini-560!Personal:Mini-560U2

More from rickwargo/CATS

4
  • 2 layers86 × 70 mmCATS, the printed circuit board in 3D

    CATS

    rickwargo/CATS

    An ESP32 system to add some spark into my '00 Z3M

    30 parts
  • 2 layers117.1 × 86 mmGears, the printed circuit board in 3D

    Gears

    rickwargo/CATS

    An ESP32 system to add some spark into my '00 Z3M

    20 parts
  • 2 layers35 × 50 mmSwitcher, the printed circuit board in 3D

    Switcher

    rickwargo/CATS

    An ESP32 system to add some spark into my '00 Z3M

    19 parts
  • 2 layers20 × 15 mmEncoder Button, the printed circuit board in 3D

    Encoder Button

    rickwargo/CATS

    An ESP32 system to add some spark into my '00 Z3M

    2 parts

Similar boards

  • 2 layers390 × 78.2 mmMBO, the printed circuit board in 3D

    MBO

    shanteacontrols/OpenDeck

    A platform for building interactive control and sensing devices using MIDI and OSC built with Zephyr RTOS.

    61 parts960Apache-2.0
  • 2 layersTUSS4470 shield, the printed circuit board in 3D

    TUSS4470 shield

    Neumi/open_echo

    Open Source echo sounder / depth sounder / SONAR for bathymetry and research. Arduino based and compatible.

    61 parts530
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    61 parts379Apache-2.0
  • 2 layers135.9 × 89.5 mmLeft, the printed circuit board in 3D

    Left

    TeXitoi/keyseebee

    KeySeeBee is a split ergo keyboard. It is only 2 PCB (so the name) with (almost) only SMD components on it. It's only a keyboard, no LED, no display, nothing more than keys and USB.

    61 parts348MIT
  • 2 layers59.7 × 57.5 mmFunBox, the printed circuit board in 3D

    FunBox

    GuitarML/FunBox

    Stereo guitar pedal platform using Daisy Seed.

    61 parts289MIT
  • 2 layers35 × 38.4 mmHandgelenk, the printed circuit board in 3D

    Handgelenk

    Jeija/esp8266-smartwatch

    ESP8266 DIY WiFi Smartwatch with MPU-9250, RTC, OLED, FT232, ...

    61 parts233
  • 2 layers99.9 × 99.9 mmEasy z80, the printed circuit board in 3D

    Easy z80

    skiselev/easy_z80

    An easy to build Zilog Z80 based single board computer

    61 parts180GPL-3.0
  • 2 layers135.3 × 106.7 mmAdlib, the printed circuit board in 3D

    Adlib

    schlae/adlib

    Reproduction AdLib Sound Card, OPL2, Circa 1990

    61 parts168

Questions

How big is the K Line PCB?

It measures 75.6 × 64.1 mm and has 2 copper layers, 1.6 mm thick.

What parts does the K Line use?

61 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the K Line KiCad files?

From the rickwargo/CATS repository on GitHub, at the commit this page was made from: the board is K-Line/K-Line.kicad_pcb and its schematic Blower Switch/Switcher.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the K Line design in my own project?

Its repository states no licence, so its author keeps all rights: ask rickwargo before reusing the design.