

Design For Assembly
How to design a board for assembly in KiCad
- Size
- 38.1 × 25.4 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 6
- Pads
- 25
- Tracks, vias
- 27, 2
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 3
- Created
- 16 Sep 2014
- Updated
- 16 Sep 2014
Overview
Design For Assembly is an open-source printed circuit board by rheingoldheavy, from the rheingoldheavy/Design-For-Assembly-In-KiCad repository on GitHub. It is a 2-layer board of 38.1 × 25.4 mm with 10 parts on 6 nets, routed with 27 tracks and 2 vias.
It is built around the CR2032. Its parts include 2 resistors, 1 capacitor, 1 IC and 1 diode.
Main components
1README
README.mdDesign-For-Assembly-In-KiCad
How to design a board for assembly in KiCad
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | FIDUCIAL | Fiducial | FID1, FID2, FID3 |
| 1 | 100 | SM0805 | R2 |
| 1 | 10K | POT_3339H | RV1 |
| 1 | 1uF | SM0805 | C1 |
| 1 | 470K | SM0805 | R1 |
| 1 | 7555 | SO8E_Oriented | U1 |
| 1 | CR2032 | S8211_BATT_HOLDER | BT1 |
| 1 | LED | LED-0805 | D1 |
Similar boards
- 2 layers333.4 × 149.9 mm

- 2 layers17.2 × 30.4 mm

- 4 layers188 × 188 mm

- 2 layers61 × 36.8 mm

- 2 layers59.2 × 41 mm

- 2 layers35 × 35 mm

- 2 layers90 × 89.4 mm

- 2 layers170.2 × 100 mm

Z80-SBC
skiselev/zeta_sbc
Zeta SBC is an Zilog Z80 based single board computer. It is inspired by Ampro Little Board Z80 and N8VEM project. Zeta SBC is software compatible with RomWBW Firmware
75 parts53GPL-3.0
Questions
How big is the Design For Assembly PCB?
It measures 38.1 × 25.4 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Design For Assembly use?
10 parts, built around the CR2032. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Design For Assembly KiCad files?
From the rheingoldheavy/Design-For-Assembly-In-KiCad repository on GitHub, at the commit this page was made from: the board is Design_For_Assembly.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Design For Assembly design in my own project?
Its repository states no licence, so its author keeps all rights: ask rheingoldheavy before reusing the design.