
Frank zx
rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

FRANK Board Laboratory (work-in-progress board prototopyes)
Frank mini is an open-source printed circuit board by rh1tech, from the rh1tech/frank-lab repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 85.6 × 54 mm with 198 parts on 180 nets, routed with 1,973 tracks and 339 vias.
It is built around the RP2350A, LM358 and SY8089AAAC, with the USBLC6-2SC6, CH217K and 74HC4052D among its other parts. Its parts include 65 resistors, 63 capacitors, 18 ICs, 11 connectors and 8 switches. It belongs with the ESP8266 and RP2350 boards of this library.
Official page: frank.rh1.tech — hub for all FRANK boards and firmware.
Experimental and work-in-progress boards for the FRANK hardware emulation platform.
WARNING: These boards are untested and unreleased. Do NOT order PCBs from this repository. They may contain errors, incomplete routing, or unverified component footprints. Use at your own risk.
For production-ready boards, see the main frank repository.
| Board | Status |
|---|---|
frank_air | Work in progress |
frank_core2 | Work in progress — pulled back from the released set |
frank_pga2 | 1.00 ready for fab, untested — dual PGA2350 (Core2 link), 2-layer, hand-solderable |
dino_z80 | Work in progress — pulled back from the released set |
xt8086_beta | Work in progress — pulled back from the released set |
frank_next_proto | Prototype — superseded by FRANK Next, released |
These boards have graduated to rh1tech/frank and are no longer maintained here:
| Was | Now |
|---|---|
frank_next | hardware/frank_next — the flagship |
frank_core2_proto | hardware/frank_core2_proto — published as a prototype |
frank_core2u | hardware/frank_core2u |
oldskoolfrank | hardware/oldskool |
Each carries its KiCad project, gerbers, fabrication docs, 3D-printable case and an assembly guide in English and Russian. Board pages with full specifications are on frank.rh1.tech.
Mikhail Matveev — xtreme@rh1.tech — rh1.tech
© 2026 Mikhail Matveev, xtreme@rh1.tech
GPL v3. See LICENSE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 32 | 100n 50V | FRANK:C_0603_1608Metric | C1, C3, C4, C10, C15, C17, C22, C25, C30, C32, C33, C34, C35, C38, C40, C46 +16 |
| 20 | 10K | FRANK:R_0603_1608Metric | R5, R10, R15, R16, R18, R22, R42, R43, R47, R49, R52, R53, R58, R59, R60, R64 +4 |
| 14 | 10u 16V | FRANK:C_0603_1608Metric | C18, C21, C23, C24, C27, C28, C36, C37, C41, C42, C43, C44, C45, C54 |
| 10 | 1K | FRANK:R_0603_1608Metric | R4, R6, R11, R19, R34, R35, R36, R62, R63, R72 |
| 6 | 100K | FRANK:R_0603_1608Metric | R9, R55, R56, R73, R74, R75 |
| 5 | 100R | FRANK:R_0603_1608Metric | R8, R37, R38, R39, R44 |
| 5 | 4.7u 16V | FRANK:C_0603_1608Metric | C2, C11, C12, C13, C57 |
| 4 | 100u 10V | FRANK:C_1206_3216Metric | C26, C55, C60, C62 |
| 4 | 22R | FRANK:R_0603_1608Metric | R68, R69, R70, R71 |
| 4 | MountingHole | FRANK:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4 |
| 3 | 1u 16V | FRANK:C_0603_1608Metric | C19, C31, C59 |
| 3 | 20K | FRANK:R_0603_1608Metric | R45, R46, R51 |
| 3 | 330R | FRANK:R_0603_1608Metric | R31, R32, R33 |
| 3 | 4.7K | FRANK:R_0603_1608Metric | R20, R21, R54 |
| 3 | USBLC6-2SC6 | FRANK:SOT-23-6 | U5, U15, U17 |
| 2 | 15p 50V | FRANK:C_0603_1608Metric | C14, C16 |
| 2 | 270R | FRANK:R_Array_4x0603 | RN1, RN2 |
| 2 | 27R | FRANK:R_0603_1608Metric | R2, R3 |
| 2 | 3V3 | FRANK:D_SOD-323 | D2, D3 |
| 2 | 470R | FRANK:R_0603_1608Metric | R40, R41 |
| 2 | 47K | FRANK:R_0603_1608Metric | R48, R50 |
| 2 | 5.1K | FRANK:R_0603_1608Metric | R14, R17 |
| 2 | AO3401A | FRANK:SOT-23-3L_AOS | Q1, Q2 |
| 2 | CH217K | FRANK:SOT-23-6 | U18, U19 |
| 1 | +1V1 | FRANK:TestPoint_Pad_D1.0mm | TP3 |
| 1 | +5V_BUCK | FRANK:TestPoint_Pad_D1.0mm | TP4 |
| 1 | 1.5A 24V | FRANK:Fuse_1812_4532Metric | F1 |
| 1 | 100K 1% | FRANK:R_0603_1608Metric | R12 |
| 1 | 104031-0811 | FRANK:MicroSD_SMD_Long | J10 |
| 1 | 10u 16V | FRANK:CP_EIA-3528-12_Kemet-T | C39 |
| 1 | 12MHz | FRANK:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | 1N5819WS | FRANK:D_SOD-323 | D1 |
| 1 | 2.2u | FRANK:L_Cenker_CKCS3015_HandSolder | L2 |
| 1 | 220u 10V | FRANK:C_Radial_D6.3mm_P2.50mm | C20 |
| 1 | 22K 1% | FRANK:R_0603_1608Metric | R13 |
| 1 | 22p 50V | FRANK:C_0603_1608Metric | C29 |
| 1 | 3.3u | FRANK:L_pol_2016 | L1 |
| 1 | 33R | FRANK:R_0603_1608Metric | R1 |
| 1 | 600R@100MHz 2A | FRANK:L_0805_2012Metric | FB1 |
| 1 | 74HC4052D | FRANK:SOP-16_P1.27mm | U11 |
| 1 | 74HC74D | FRANK:SOIC-14_P1.27mm | U7 |
| 1 | Audio | FRANK:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | Blue | FRANK:LED_0603_1608Metric | LD1 |
| 1 | CD4069UBM | FRANK:SOIC127P600X175-14N | U12 |
| 1 | CR1220 | FRANK:Battery_CR1220_MYOUNG_BS-12-B3AA003 | BT1 |
| 1 | DC3RX19JA2 | FRANK:HDMI_Female | J5 |
| 1 | DEBUG | FRANK:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J3 |
| 1 | DS05-127-2-03BK | FRANK:SW_DS05-127-2-03BK-SMT-TR | S1 |
| 1 | ESP Boot | FRANK:KMR_2 | S5 |
| 1 | ESP Reset | FRANK:KMR_2 | S6 |
| 1 | ESP-01v090 | FRANK:ESP-01 | U14 |
| 1 | ESP-PSRAM64H | FRANK:SO-8 | U2 |
| 1 | Ext_Sound | FRANK:IDC-Header_2x05_P2.54mm_Vertical | J7 |
| 1 | Force On | FRANK:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP4 |
| 1 | GP2 | FRANK:DSUB-9_Male_TopMount | J12 |
| 1 | Green | FRANK:LED_0603_1608Metric | LD2 |
| 1 | Hub | FRANK:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP5 |
| 1 | LM358 | FRANK:SO-8 | U10 |
| 1 | LX | FRANK:TestPoint_Pad_D1.0mm | TP5 |
| 1 | MDC-036 | FRANK:MiniDIN_6pin_Female | J11 |
| 1 | MW7211A | FRANK:SOP-16 | U16 |
| 1 | PJ-320D | FRANK:AudioJack_3.5mm_PJ320D_TapeIn | J9 |
| 1 | PJ-320D | FRANK:AudioJack_3.5mm_PJ320D_AudioOut | J8 |
| 1 | PWR | FRANK:PinHeader_1x03_P2.54mm | J1 |
| 1 | RP Boot | FRANK:TS-1234VW | S2 |
| 1 | RP Boot | FRANK:KMR_2 | S3 |
| 1 | RP Reset | FRANK:TS-1234VW | S8 |
| 1 | RP Reset | FRANK:KMR_2 | S7 |
| 1 | RP2350 | FRANK:QFN-60_RP2350A | U1 |
| 1 | RV-3032-C7 | FRANK:RV-3032-C7 | U8 |
| 1 | Red | FRANK:LED_0603_1608Metric | LD3 |
| 1 | SK12D07VG3NS | FRANK:SK12D07VG3NS | S4 |
| 1 | SS-52100-004 | FRANK:USB_A_Stacked | J13 |
| 1 | SY8089AAAC | FRANK:SOT-23-5 | U4 |
| 1 | TDA1387T | FRANK:SO-8 | U9 |
| 1 | TS3USB221RSER | FRANK:UQFN-10 | U6 |
| 1 | TXS0104EDR | FRANK:SOIC-14_P1.27mm | U13 |
| 1 | Tape | FRANK:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP2 |
| 1 | UART | FRANK:JST_SH_BM03B-SRSS-TB_1x03-1MP_P1.00mm_Vertical | J2 |
| 1 | USB-C | FRANK:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3 |
The 193 most common of 198 parts.

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)




AnterCreeper/pdaltmode
USB Power Delivery Alt-mode Negotiation using CH32X035


UzixLS/zxevo1010-board
10x10cm PCB variant of ZX-Evolution project for G738/G706 enclosure


It measures 85.6 × 54 mm and has 4 copper layers, 1 mm thick.
198 parts, built around the RP2350A, LM358, SY8089AAAC and USBLC6-2SC6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rh1tech/frank-lab repository on GitHub, at the commit this page was made from: the board is frank_mini/frank_mini.kicad_pcb and its schematic dino_z80/boot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).