
Frank zx
rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

FRANK Board Laboratory (work-in-progress board prototopyes)
Frank core2 is an open-source printed circuit board by rh1tech, from the rh1tech/frank-lab repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 80.6 × 54 mm with 195 parts on 215 nets, routed with 2,007 tracks and 325 vias.
It is built around the RP2350A, RP2350B and W25Q128JVPIQ, with the SY8089AAAC, TPD4S012DRYR-TP and APS6404L-3SQR-ZR among its other parts. Its parts include 80 capacitors, 50 resistors, 21 ICs, 13 connectors and 7 switches. It belongs with the ESP8266 and RP2350 boards of this library.
Official page: frank.rh1.tech — hub for all FRANK boards and firmware.
Experimental and work-in-progress boards for the FRANK hardware emulation platform.
WARNING: These boards are untested and unreleased. Do NOT order PCBs from this repository. They may contain errors, incomplete routing, or unverified component footprints. Use at your own risk.
For production-ready boards, see the main frank repository.
| Board | Status |
|---|---|
frank_air | Work in progress |
frank_core2 | Work in progress — pulled back from the released set |
frank_pga2 | 1.00 ready for fab, untested — dual PGA2350 (Core2 link), 2-layer, hand-solderable |
dino_z80 | Work in progress — pulled back from the released set |
xt8086_beta | Work in progress — pulled back from the released set |
frank_next_proto | Prototype — superseded by FRANK Next, released |
These boards have graduated to rh1tech/frank and are no longer maintained here:
| Was | Now |
|---|---|
frank_next | hardware/frank_next — the flagship |
frank_core2_proto | hardware/frank_core2_proto — published as a prototype |
frank_core2u | hardware/frank_core2u |
oldskoolfrank | hardware/oldskool |
Each carries its KiCad project, gerbers, fabrication docs, 3D-printable case and an assembly guide in English and Russian. Board pages with full specifications are on frank.rh1.tech.
Mikhail Matveev — xtreme@rh1.tech — rh1.tech
© 2026 Mikhail Matveev, xtreme@rh1.tech
GPL v3. See LICENSE.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 43 | 100nF | FRANK:C_0603_1608Metric | C1, C2, C10, C11, C12, C13, C14, C15, C16, C17, C18, C19, C20, C21, C22, C27 +27 |
| 15 | 10uF | FRANK:C_0603_1608Metric | C39, C45, C47, C48, C63, C64, C65, C66, C67, C69, C71, C73, C75, C76, C77 |
| 13 | 10K | FRANK:R_0603_1608Metric | R2, R4, R5, R15, R20, R24, R25, R26, R29, R31, R32, R33, R46 |
| 10 | 1K | FRANK:R_0603_1608Metric | R7, R9, R10, R11, R17, R19, R23, R34, R44, R47 |
| 8 | 4.7uF | FRANK:C_0603_1608Metric | C3, C4, C8, C9, C23, C26, C28, C29 |
| 5 | 100K | FRANK:R_0603_1608Metric | R40, R42, R43, R45, R49 |
| 4 | 100uF | FRANK:C_1206_3216Metric | C43, C44, C59, C60 |
| 4 | 15pF | FRANK:C_0603_1608Metric | C5, C6, C24, C25 |
| 4 | 27R | FRANK:R_0603_1608Metric | R12, R13, R21, R22 |
| 4 | 33R | FRANK:R_0603_1608Metric | R1, R3, R6, R18 |
| 4 | 5.1K | FRANK:R_0603_1608Metric | R35, R36, R37, R38 |
| 4 | MountingHole | FRANK:MountingHole_2.5mm_Pad_Via | H1, H2, H3, H4 |
| 4 | TPD4S012DRYR | FRANK:TPD4S012DRYR | U11, U12, U13, U14 |
| 3 | 12 MHz | FRANK:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1, Y2, Y3 |
| 3 | 1uF | FRANK:C_0603_1608Metric | C51, C52, C74 |
| 3 | 4.7K | FRANK:R_0603_1608Metric | R27, R28, R48 |
| 2 | 0R | FRANK:R_0603_1608Metric | R8, R16 |
| 2 | 12pF | FRANK:C_0603_1608Metric | C78, C79 |
| 2 | 1N5819WS | FRANK:D_SOD-323 | D1, D2 |
| 2 | 270R | FRANK:R_Array_4x0603 | RN1, RN2 |
| 2 | 3.3µH | FRANK:L_AOTA-B201610_2.0x1.6mm | L1, L2 |
| 2 | 330R 2A | FRANK:L_0805_2012Metric | L3, L4 |
| 2 | 676430910 | FRANK:USB_A_Short | J10, J11 |
| 2 | APS6404L-3SQR-ZR | FRANK:PSON50P200X300X50-9N | U1, U5 |
| 2 | BC850 | FRANK:SOT-23 | Q1, Q2 |
| 2 | CH217K | FRANK:SOT-23-6 | U15, U16 |
| 2 | Debug | FRANK:JST_SH_1x03_P1.00mm_Vertical | J1, J4 |
| 2 | RP Boot | FRANK:Button_SMD_3x4x2mm | S2, S4 |
| 2 | RP Reset | FRANK:Button_SMD_3x4x2mm | S3, S5 |
| 2 | UART | FRANK:JST_SH_1x03_P1.00mm_Vertical | J2, J5 |
| 2 | USB4215-03-A | FRANK:USB_C_Receptacle | J12, J13 |
| 2 | W25Q128JVPIQ | FRANK:WSON-8-1EP_6x5mm_P1.27mm_EP3.45x4.35mm | U2, U4 |
| 1 | 100R | FRANK:R_0603_1608Metric | R30 |
| 1 | 104031-0811 | FRANK:MicroSD_SMD_Long | J6 |
| 1 | 1M | FRANK:R_0603_1608Metric | R41 |
| 1 | 1N4148 | FRANK:D_SOD-323 | D3 |
| 1 | 2.2uH | FRANK:L_Cenker_CKCS3015 | L5 |
| 1 | 22K | FRANK:R_0603_1608Metric | R50 |
| 1 | 22pF | FRANK:C_0603_1608Metric | C80 |
| 1 | 300K | FRANK:R_0603_1608Metric | R39 |
| 1 | 330R | FRANK:R_0603_1608Metric | R14 |
| 1 | AO3401A | FRANK:SOT-23-3L_AOS | U18 |
| 1 | Blue | FRANK:LED_0603_1608Metric | LD2 |
| 1 | CH334F | FRANK:QFN-24-1EP_4x4mm_P0.5mm_EP2.7x2.7mm | U21 |
| 1 | CR1220 | FRANK:Battery_CR1220 | BT1 |
| 1 | DC3RX19JA2 | FRANK:HDMI_Female | J3 |
| 1 | DS3231MZ | FRANK:SO-8_3.9x4.9mm_P1.27mm | U10 |
| 1 | ESP Reset | FRANK:Button_SMD_3x4x2mm | S1 |
| 1 | ESP-01v090 | FRANK:ESP-01 | U9 |
| 1 | Green | FRANK:LED_0603_1608Metric | LD3 |
| 1 | PJ-320D | FRANK:AudioJack_3.5mm_PJ320D_AudioOut | J7 |
| 1 | PJ-320D | FRANK:AudioJack_3.5mm_PJ320D_TapeIn | J9 |
| 1 | RP2350 | FRANK:QFN-60-1EP_7x7mm_P0.4mm_EP3.4x3.4mm | U6 |
| 1 | RP2350B | FRANK:RP2350-QFN-80_10x10_P0.4mm | U3 |
| 1 | SK12D07VG3NS | FRANK:Switch_Slide_SK12D07VG3NS_PWR | S7 |
| 1 | SS12D00 | FRANK:Switch_Slide_SS12D00 | S6 |
| 1 | SY8089AAAC | FRANK:SOT-23-5 | U20 |
| 1 | Speaker | FRANK:JST_GH_1x02_P1.25mm | J8 |
| 1 | TLV320DAC3100IRHBR | FRANK:TLV320DAC3100IRHBR | U7 |
| 1 | TPS2116DRL | FRANK:SOT-583-8 | U17 |
| 1 | TS3USB221RSER | FRANK:UQFN-10 | U19 |
| 1 | USB Debug | FRANK:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1 |
| 1 | WS2812B-2020 | FRANK:LED_WS2812B-2020_PLCC4_2.0x2.0mm | LD1 |
| 1 | XC6206P182MR-G | FRANK:XC6206P182MR-G | U8 |

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)

rh1tech/frank-lab
FRANK Board Laboratory (work-in-progress board prototopyes)


AnterCreeper/pdaltmode
USB Power Delivery Alt-mode Negotiation using CH32X035




ovo-Tim/phone-hub
A USBC hub for your phone and computers. It aims to help you customize your phone and computers by allowing you to connect to any I2C, SPI, and UART devices.

gustebeast/public-steel-guitar
A pedal steel guitar you can build yourself, from parts anyone can buy.

It measures 80.6 × 54 mm and has 4 copper layers, 1.6 mm thick.
195 parts, built around the RP2350A, RP2350B, W25Q128JVPIQ and SY8089AAAC. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rh1tech/frank-lab repository on GitHub, at the commit this page was made from: the board is frank_core2/frank_core2.kicad_pcb and its schematic dino_z80/boot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).