
Keyboard x2-lumberjack arm hsrgb
rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware

Repo with my PCB designs and keyboard firmware
Keyboard ch32x-75 is an open-source printed circuit board by rgoulter, from the rgoulter/keyboard-labs repository on GitHub. It is a 2-layer board of 285 × 94.2 mm with 325 parts on 209 nets, routed with 2,195 tracks and 426 vias.
It is built around the CH32X035C8T6, USBLC6-2SC6 and AO3400A. Its parts include 7 resistors, 3 capacitors, 3 connectors, 2 ICs and 2 diodes. It belongs with the keyboards and input boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 75 | 1N4148 | Diode_SMD:D_1206_3216Metric | D_1_1, D_1_2, D_1_3, D_1_4, D_1_5, D_1_6, D_1_7, D_1_8, D_1_9, D_1_10, D_1_11, D_1_12, D_1_13, D_1_14, D_1_15, D_2_1 +59 |
| 75 | 560R | Resistor_SMD:R_0805_2012Metric | R_1_1, R_1_2, R_1_3, R_1_4, R_1_5, R_1_6, R_1_7, R_1_8, R_1_9, R_1_10, R_1_11, R_1_12, R_1_13, R_1_14, R_1_15, R_2_1 +59 |
| 75 | LED_Small | LED_SMD:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | L_1_1, L_1_2, L_1_3, L_1_4, L_1_5, L_1_6, L_1_7, L_1_8, L_1_9, L_1_10, L_1_11, L_1_12, L_1_13, L_1_14, L_1_15, L_2_1 +59 |
| 75 | Redragon Low Profile switches | ProjectLocal:SW_Redragon_LowProfile_PCB_1.00u | SW_1_1, SW_1_2, SW_1_3, SW_1_4, SW_1_5, SW_1_6, SW_1_7, SW_1_8, SW_1_9, SW_1_10, SW_1_11, SW_1_12, SW_1_13, SW_1_14, SW_1_15, SW_2_1 +59 |
| 5 | MountingHole | MountingHole:MountingHole_2.2mm_M2_DIN965 | H1, H2, H3, H4, H5 |
| 4 | 10k | Resistor_SMD:R_0805_2012Metric | R1, R4, R5, R7 |
| 2 | 100nF | Capacitor_SMD:C_0805_2012Metric | C1, C2 |
| 2 | 5.1k | Resistor_SMD:R_0805_2012Metric | R2, R3 |
| 2 | LED | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 2 | SW_SPST | Connector_Wire:SolderWire-0.5sqmm_1x02_P4.6mm_D0.9mm_OD2.1mm | SW1, SW2 |
| 1 | 220R | Resistor_SMD:R_0805_2012Metric | R6 |
| 1 | 4.7uF | Capacitor_SMD:C_0805_2012Metric | C3 |
| 1 | AO3400A | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | CH32X035C8T6 | Package_QFP:LQFP-48_7x7mm_P0.5mm | U1 |
| 1 | Conn_01x02 | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | Conn_01x04 | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J3 |
| 1 | USB Type-C Female 16P | Connector_USB:USB_C_Receptacle_HRO_TYPE-C-31-M-12 | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U2 |

rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware

rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware

rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware


rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware

rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware


rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware


rgoulter/keyboard-labs
Repo with my PCB designs and keyboard firmware




kunichiko/X68k-MinyasX
MinyasX は、Windows (AT互換機) 用の FDD を無改造で X68000 に接続して使えるようにするアダプタです。

popovb/zxRebornClock
Часы на ГРИ ИН-14 с синхронизацией времени через интернет



suzan-works/XIAO_CH32X035
Tiny microcontroller board equipped with WCH CH32X035. WCH CH32X035を搭載した小型のマイコンボード

brickbots/PiFinder
A plate solving telescope finder based around a Raspberry PI and RPI HQ Camera

bobberdolle1/SkySweep32
Open-source passive multi-band RF monitoring system | 855–925 MHz, 2.4 GHz, 5.8 GHz | Rev C first prototype
It measures 285 × 94.2 mm and has 2 copper layers, 1.6 mm thick.
325 parts, built around the CH32X035C8T6, USBLC6-2SC6 and AO3400A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the rgoulter/keyboard-labs repository on GitHub, at the commit this page was made from: the board is pcb/keyboard-ch32x-75.kicad_pcb and its schematic docs/logic-level-shifting-3v3-to-5v-using-fet.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask rgoulter before reusing the design.