Skip to the content
4 layers29.3 × 45.5 mmTest project, the printed circuit board in 3D

A converter from an original IBM PC Keyboard to USB-C

Size
29.3 × 45.5 mm
Copper layers
4
Thickness
1.6 mm
Parts
15
Nets
54
Pads
105
Tracks, vias
77, 25
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 Aug 2025
Updated
5 Jan 2026

Overview

Test project is an open-source printed circuit board by tmolteno, from the tmolteno/keyboard-xt-usbc repository on GitHub. It is a 4-layer board of 29.3 × 45.5 mm with 15 parts on 54 nets, routed with 77 tracks and 25 vias.

It is built around the CH32X035C8T6. Its parts include 5 resistors, 3 diodes, 3 connectors, 1 IC and 1 switch.

Main components

1

README

README.md

Interface an IBM PC-XT original keyboard to USB-C

Parts

15
QtyValueFootprintReferences
31kResistor_SMD:R_0402_1005MetricR3, R4, R5
25.1kResistor_SMD:R_0402_1005MetricR1, R2
11N5819Diode_SMD:D_SOD-323D3
1CAPSLED_SMD:LED_0603_1608MetricD2
1CH32X035C8T6Package_QFP:LQFP-48_7x7mm_P0.5mmU1
1DIN-5_180degreeDIN5:HOOYA-DIN_504B_M5J1
1PROGButton_Switch_SMD:SW_Push_1P1T_XKB_TS-1187ASW1
1PWRLED_SMD:LED_0603_1608MetricD1
1USB_C_Receptacle_USB2.0_16PConnector_USB:USB_C_Receptacle_G-Switch_GT-USB-7010ASVJ2
1swd-connect-3swd-connect:swd-connect-3-mcu-tightJ3

The 13 most common of 15 parts.

Similar boards

  • 2 layers285 × 94.2 mmKeyboard ch32x-75, the printed circuit board in 3D

    Keyboard ch32x-75

    rgoulter/keyboard-labs

    Repo with my PCB designs and keyboard firmware

    325 parts236
  • 4 layers129 × 121 mmMinyasX Combined, the printed circuit board in 3D

    MinyasX Combined

    kunichiko/X68k-MinyasX

    MinyasX は、Windows (AT互換機) 用の FDD を無改造で X68000 に接続して使えるようにするアダプタです。

    232 parts2MIT
  • 4 layers21 × 51 mmCh32-pico, the printed circuit board in 3D

    Ch32-pico

    fcjr/ch32-pico

    ch32 > rpi2040

    55 parts
  • 2 layers148.5 × 90 mmZxRebornClock, the printed circuit board in 3D

    ZxRebornClock

    popovb/zxRebornClock

    Часы на ГРИ ИН-14 с синхронизацией времени через интернет

    125 partsMIT
  • 2 layers61 × 52 mmCH32X035C R0, the printed circuit board in 3D

    CH32X035C R0

    openwch/ch32x035

    32-bit RISC-V MCU CH32X035 built-in USB PD PHY

    40 parts86
  • 4 layers17.8 × 21 mmCH32X035 XIAO Compatible Board, the printed circuit board in 3D

    CH32X035 XIAO Compatible Board

    suzan-works/XIAO_CH32X035

    Tiny microcontroller board equipped with WCH CH32X035. WCH CH32X035を搭載した小型のマイコンボード

    20 parts8MIT
  • 4 layers29 × 50.3 mmLg hvac esp32, the printed circuit board in 3D

    Lg hvac esp32

    JanM321/esphome-lg-controller

    Wired controller for LG HVAC units using ESPHome and ESP32

    15 parts2920BSD

Questions

How big is the Test project PCB?

It measures 29.3 × 45.5 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Test project use?

15 parts, built around the CH32X035C8T6. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Test project KiCad files?

From the tmolteno/keyboard-xt-usbc repository on GitHub, at the commit this page was made from: the board is test_project.kicad_pcb and its schematic test_project.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Test project design in my own project?

Its repository states no licence, so its author keeps all rights: ask tmolteno before reusing the design.