
PSLab
fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

Custom PCB + code for multi app media PC control with generic IR remote
IR remote for PC ProMicro32u4 is an open-source printed circuit board by retrobuiltRyan, from the retrobuiltRyan/IR-Remote-for-PC-Media repository on GitHub, published under the BSD-3-Clause licence. It is a 2-layer board of 42 × 50 mm with 24 parts on 34 nets, routed with 120 tracks and 21 vias.
It is built around the WS2812B. Its parts include 5 capacitors, 5 diodes, 2 ICs, 1 resistor and 1 connector. It belongs with the AVR (ATmega, ATtiny) boards of this library.
Custom PCB + code for multi app media PC control with generic IR remote. Use an Arduino Pro Micro or RP2040 Pro Micro to decode an IR remote, assign macros. Control your PC with a USB HID (keyboard) device using an IR remote. https://youtu.be/KI53avHp_a4
| Reference | Value | Qty | Cost Each | Line Total | DigiKey P/N | AliExpress Link |
|---|---|---|---|---|---|---|
| C1, C2, C3, C4, C5 | 0.1uF 50V | 5 | $0.07 | $0.35 | 1276-1068-1-ND | |
| D1, D2, D3, D4, D5 | WS2812B | 5 | $0.10 | $0.50 | 1568-16347CT-ND | AliExpress |
| J3 | OLED 1.3" 128x64 | 1 | $4.59 | $4.59 | AliExpress | |
| R1 | 220 ohm | 1 | $0.02 | $0.02 | 311-220FRCT-ND | |
| SW1 | SW Push Button | 1 | $0.12 | $0.12 | CKN12221-1-ND | |
| U1 | Pro Micro ATMEGA 32u4 | 1 | $4.29 | $4.29 | AliExpress | |
| PCB | JLCPCB | 1 | $0.30 | $0.30 | ||
| IR Receiver | IR RX | 1 | $0.11 | $0.11 | AliExpress | |
| Remote | Roku Media Remote | 1 | $2.67 | $2.67 | AliExpress |
Total Cost: $12.95
Note: (The example code will not work if your main TV is a roku TV; you'll need to decode and program a different remote [brand/ protocol] than your TV).
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 0.1uF 50V | Capacitor_SMD:C_1206_3216Metric | C1, C2, C3, C4, C5 |
| 5 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D1, D2, D3, D4, D5 |
| 4 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP3, JP4, JP5, JP6 |
| 2 | MountingHole_M3_3.2mm_Pad | PCM_SL_Mechanical:MountingHole_3.2mm_Pad | H5, H6 |
| 2 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2 |
| 1 | 220 | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | MountingHole | MountingHole:MountingHole_4.3mm_M4 | H4 |
| 1 | PINHD_1x4_Male | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J1 |
| 1 | SW_Push | Button_Switch_SMD:SW_SPST_Omron_B3FS-100xP | SW1 |
| 1 | TSDP341xx | OptoDevice:Vishay_MOLD-3Pin | U2 |
| 1 | ~ | Ryan_Custom_Modules:Arduino_Pro_Micro_32u4 | U1 |

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io

FrameworkComputer/ExpansionCards
Reference designs and documentation to create Expansion Cards for the Framework Laptop



PrintersForAnts/Micron
If you want to purchase full kits there are 3 available (Kits are slowly updating to R1 hardware just make sure to double check the included hardware in your kit and if you have any questions reach out in the discord)



It measures 42 × 50 mm and has 2 copper layers, 1.6 mm thick.
24 parts, built around the WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the retrobuiltRyan/IR-Remote-for-PC-Media repository on GitHub, at the commit this page was made from: the board is IR_remote_for_PC_ProMicro32u4.kicad_pcb and its schematic IR_remote_for_PC_ProMicro32u4.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the BSD-3-Clause licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).