

D3 Board
I3E-D3 Electronics
- Size
- 115 × 83 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 46
- Nets
- 60
- Pads
- 162
- Tracks, vias
- 350, 0
- Pours
- 2
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 19 Jan 2021
- Updated
- 14 Jul 2021
Overview
D3 Board is an open-source printed circuit board by rascimatec, from the rascimatec/i3e-d3_Electronics repository on GitHub. It is a 2-layer board of 115 × 83 mm with 46 parts on 60 nets, routed with 350 tracks and 0 vias.
It is built around the LM2596S-5.0 and BC546. Its parts include 17 connectors, 10 resistors, 4 ICs, 4 transistors and 1 capacitor.
Main components
2README
README.mdI3E-D3 Electronics
I3E-D3 Main Board:

I3E-D3 Face Board:

Parts
46| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | 4.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R3, R4, R5, R6 |
| 4 | BC546 | Package_TO_SOT_THT:TO-92_Inline | Q1, Q2, Q3, Q4 |
| 2 | 1k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R7, R8 |
| 2 | 3.3k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R10 |
| 1 | 1.7k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9 |
| 1 | 1000uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1 |
| 1 | 11k | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1 |
| 1 | ACS_SENSOR | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J10 |
| 1 | BUZZER | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J13 |
| 1 | Bluepill | BLUEPILL:BluePill_STM32F103C | U1 |
| 1 | CURRENT_POWER_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J5 |
| 1 | GPS_NEO6M | D3_Board:GPS_NEO6M_module | U3 |
| 1 | H-BRIDGE1 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J11 |
| 1 | H-BRIDGE2 | Connector_PinHeader_2.54mm:PinHeader_1x07_P2.54mm_Vertical | J12 |
| 1 | LED_Matrix | Connector_PinHeader_2.54mm:PinHeader_1x05_P2.54mm_Vertical | J6 |
| 1 | LM2596 | D3_Board:LM2596_module | U2 |
| 1 | LOGO | D3_Board:ieee_logo | G*** |
| 1 | LOGO | D3_Board:ras_logo_11_8mm | G*** |
| 1 | LOGO | D3_Board:ras_logo | G*** |
| 1 | LOGO | D3_Board:ieee_logo_11_8mm | G*** |
| 1 | MOTOR1 | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J8 |
| 1 | MOTOR1_OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J15 |
| 1 | MOTOR1_POW | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J14 |
| 1 | MOTOR2 | Connector_JST:JST_EH_B6B-EH-A_1x06_P2.50mm_Vertical | J9 |
| 1 | MOTOR2_OUT | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J17 |
| 1 | MOTOR2_POW | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J16 |
| 1 | MPU6050 | D3_Board:MPU6050_module | U4 |
| 1 | POWER_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J2 |
| 1 | POWER_IN | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J1 |
| 1 | RASPBERRY | Connector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_Vertical | J4 |
| 1 | RASPBERRY_POWER_IN | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-5.0-H_1x02_P5.00mm_Horizontal | J3 |
| 1 | SERVO1 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M2 |
| 1 | SERVO2 | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | M1 |
| 1 | USB_TTL | Connector_PinHeader_2.54mm:PinHeader_1x06_P2.54mm_Vertical | J7 |
The 42 most common of 46 parts.
More from rascimatec/i3e-d3_Electronics
2- 2 layers100 × 70 mm

- 2 layers92.7 × 77.5 mm

Similar boards
- 2 layers85.1 × 35.6 mm

SmartTherm
Strooom/SmartTherm
Controlling a Junkers heating (Eurostar ZWE24) with an IoT thermostat
22 parts33 - 4 layers150 × 100 mm

- 2 layers108 × 88 mm

- 2 layers64 × 56 mm

Rpi dbt03
bildschirmtext/rpi-dbt03
Hardware, Software and Firmware for a Raspberry Pi to DBT-03 adapter
36 parts11MIT - 2 layers74.9 × 89.2 mm

Pictas
bigbass1997/PICTAS
Low-cost replay device for playing back Tool Assisted Speedruns on real hardware
37 parts9 - 2 layers66.7 × 36.8 mm

Kick
Wesemane-Industries/808-kick-eurorack
808 kick (bass drum) for eurorack / modular synth
57 parts8GPL-3.0 - 2 layers78 × 108 mm

Euclid+ Main Board
m0xpd/EUCLIDplus
EUCLID+ is a Clock Divider, Oscillator and Rhythm Sequencer for electronic music applications
131 parts7CC-BY-SA-4.0 - 2 layers28 × 108 mm

Flip Main Board
m0xpd/FLIP
A Bernoulli Gate for Electronic Music Applications, realised in Hardware
48 parts7CC-BY-SA-4.0
Questions
How big is the D3 Board PCB?
It measures 115 × 83 mm and has 2 copper layers, 1.6 mm thick.
What parts does the D3 Board use?
46 parts, built around the LM2596S-5.0 and BC546. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the D3 Board KiCad files?
From the rascimatec/i3e-d3_Electronics repository on GitHub, at the commit this page was made from: the board is D3_Board/D3_Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the D3 Board design in my own project?
Its repository states no licence, so its author keeps all rights: ask rascimatec before reusing the design.