Skip to the content
4 layers55.5 × 56.3 mmMOTOR PCB-, the printed circuit board in 3D
Size
55.5 × 56.3 mm
Copper layers
4
Thickness
0.19 mm
Parts
57
Nets
82
Pads
226
Tracks, vias
357, 81
Pours
3
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
17 Jan 2024
Updated
17 Jan 2024

Overview

MOTOR PCB- is an open-source printed circuit board by raduu-m, from the raduu-m/MOTOR_PCB- repository on GitHub. It is a 4-layer board of 55.5 × 56.3 mm with 57 parts on 82 nets, routed with 357 tracks and 81 vias.

It is built around the STM32F405RGT6, USBLC6-2SC6 and AO3401A. Its parts include 18 capacitors, 14 resistors, 6 connectors, 4 ICs and 4 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.

Main components

3

Parts

57
QtyValueFootprintReferences
5100nCapacitor_SMD:C_0402_1005MetricC4, C5, C6, C7, C8
42k2Resistor_SMD:R_0402_1005MetricR9, R10, R13, R14
4MountingHole_PadMountingHole:MountingHole_3.2mm_M3_DIN965_PadH1, H2, H3, H4
310uCapacitor_SMD:C_1206_3216MetricC13, C15, C16
212pCapacitor_SMD:C_0402_1005MetricC11, C12
22u2Capacitor_SMD:C_0603_1608MetricC1, C2
2Conn_01x04Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_HorizontalJ3, J4
2D_Schottky_SmallDiode_SMD:D_SOD-123D2, D3
10.1uCapacitor_SMD:C_0402_1005MetricC18
1100kResistor_SMD:R_0603_1608MetricR4
110kResistor_SMD:R_0402_1005MetricR1
110nCapacitor_SMD:C_0603_1608MetricC14
110nCapacitor_SMD:C_0402_1005MetricC10
110uCapacitor_SMD:C_0402_1005MetricC17
110uInductor_SMD:L_Sunlord_MWSA0518SL1
115kResistor_SMD:R_0603_1608MetricR7
11kResistor_SMD:R_0603_1608MetricR11
11k5Resistor_SMD:R_0603_1608MetricR3
11uCapacitor_SMD:C_0402_1005MetricC9
1250mAFuse:Fuse_1206_3216MetricF1
1270Resistor_SMD:R_0603_1608MetricR8
139nInductor_SMD:L_0402_1005MetricL2
147Resistor_SMD:R_0402_1005MetricR2
147kResistor_SMD:R_0603_1608MetricR6
14u7Capacitor_SMD:C_0402_1005MetricC3
1600 @ 600 MHzInductor_SMD:L_0805_2012MetricFB1
165kResistor_SMD:R_0603_1608MetricR5
1AO3401APackage_TO_SOT_SMD:SOT-23Q2
1BLUELED_SMD:LED_0603_1608MetricD1
1Conn_02x05_Odd_EvenConnector_PinSocket_1.27mm:PinSocket_2x05_P1.27mm_Vertical_SMDJ2
1Crystal_GND24_SmallCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
1INA219AxDPackage_SO:SOIC-8_3.9x4.9mm_P1.27mmU4
1MotorTerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ5
1REDLED_SMD:LED_0603_1608MetricD4
1R_ShuntResistor_SMD:R_Shunt_Ohmite_LVK12R12
1STM32F405RGT6Package_QFP:LQFP-64_10x10mm_P0.5mmU1
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW1
1Screw_Terminal_01x02TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_HorizontalJ1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U3
1USB_C_Plug_USB2.0Connector_USB:USB_C_Plug_ShenzhenJingTuoJin_918-118A2021Y40002_VerticalP1
1~Package_TO_SOT_SMD:SOT-23-6U2

Similar boards

  • 2 layers50 × 66 mmBluePhil, the printed circuit board in 3D

    BluePhil

    pms67/BluePhil

    STM32-based development board with various sensors.

    106 parts53MIT
  • 4 layers70.8 × 70.8 mmStm32 f4xx minimal, the printed circuit board in 3D

    Stm32 f4xx minimal

    amrithHN/stm32f4xx_minimal_dev

    stm32f4 minimal dev board with few sensors

    79 parts4GPL-3.0
  • 4 layers57 × 52 mmSTM32 based project, the printed circuit board in 3D

    STM32 based project

    majdbiw4200/STM32F405RGT-dev-board

    STM32 + USB + Buck Converter PCB Design

    50 parts3MIT
  • 4 layers60 × 56 mmSTM32F4 Breakout REV2, the printed circuit board in 3D

    STM32F4 Breakout REV2

    alphaseneca/pcb_design_repo

    A repository for storing and documenting the pcb design files.

    63 parts1MIT
  • 4 layers60.7 × 40 mmSTM32F4 REV2, the printed circuit board in 3D

    STM32F4 REV2

    pravinsharma15k-ops/STM32F4-Test-Board

    STM32F405-based test board designed in KiCad 10, with buck converter, USB, SWD, I2C and UART.

    52 parts1
  • 4 layers57.5 × 50.9 mmStm32project, the printed circuit board in 3D

    Stm32project

    Codebreaker000/PCB_DESIGNS

    Contains all PCB designs with Schematics and Board view file's and both pdf's to understand and gerber files and the view and layout of the PCB's.

    50 parts
  • 4 layers156.6 × 143.1 mmSTM32F4 Breakout, the printed circuit board in 3D

    STM32F4 Breakout

    DallasFormulaRacing/PneumaticPaddleShifting

    An embedded system for the driver to perform up and down shifts with pneumatic paddle shifters.

    56 parts

Questions

How big is the MOTOR PCB- PCB?

It measures 55.5 × 56.3 mm and has 4 copper layers, 0.19 mm thick.

What parts does the MOTOR PCB- use?

57 parts, built around the STM32F405RGT6, USBLC6-2SC6 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the MOTOR PCB- KiCad files?

From the raduu-m/MOTOR_PCB- repository on GitHub, at the commit this page was made from: the board is Kicad files/version1.kicad_pcb and its schematic Kicad files/version1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the MOTOR PCB- design in my own project?

Its repository states no licence, so its author keeps all rights: ask raduu-m before reusing the design.