Skip to the content
4 layers70.8 × 70.8 mmStm32 f4xx minimal, the printed circuit board in 3D

stm32f4 minimal dev board with few sensors

Size
70.8 × 70.8 mm
Copper layers
4
Thickness
4.69 mm
Parts
79
Nets
100
Pads
292
Tracks, vias
0, 0
Pours
2
Routed
Not yet
KiCad
KiCad 6 (file 20211014)
Created
20 Nov 2022
Updated
29 Nov 2022

Overview

Stm32 f4xx minimal is an open-source printed circuit board by amrithHN, from the amrithHN/stm32f4xx_minimal_dev repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 70.8 × 70.8 mm with 79 parts on 100 nets.

It is built around the STM32F405RGT6, BMP280 and MP2359DJ-LF-Z, with the W25N01GVZEIGTR, BMI088 and USBLC6-2SC6 among its other parts. Its parts include 30 resistors, 19 capacitors, 9 connectors, 6 ICs and 5 diodes. It belongs with the STM32 boards of this library.

Main components

9

README

README.md

Stm32f407 based board with barometer sensor

image

GPL license

Parts

79
QtyValueFootprintReferences
1622Resistor_SMD:R_0402_1005MetricR15, R16, R17, R18, R19, R20, R21, R22, R23, R24, R25, R26, R27, R28, R29, R30
10100nCapacitor_SMD:C_0402_1005MetricC3, C4, C5, C7, C9, C17, C18, C19, C20, C21
6Conn_01x04Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_HorizontalJ3, J4, J5, J6, J7, J8
41kResistor_SMD:R_0603_1608MetricR9, R12, R13, R14
4MountingHoleMountingHole:MountingHole_3.2mm_M3_PadH1, H2, H3, H4
210uCapacitor_SMD:C_0603_1608MetricC15, C16
210uCapacitor_SMD:C_1206_3216MetricC1, C8
220pCapacitor_SMD:C_0402_1005MetricC2, C6
22k2Resistor_SMD:R_0603_1608MetricR8, R10
22u2Capacitor_SMD:C_0603_1608MetricC10, C11
2B5819WB5819W-TP:SOD3716X135ND1, D2
1100kResistor_SMD:R_0603_1608MetricR2
110kResistor_SMD:R_0603_1608MetricR4
110nCapacitor_SMD:C_0402_1005MetricC12
115kResistor_SMD:R_0603_1608MetricR6
116MHzCrystal:Crystal_SMD_3225-4Pin_3.2x2.5mmY1
119-237/R6GHBHC-A01/2TRGB_LED:19-237-R6GHBHC-A01-2TD5
11k5Resistor_SMD:R_0603_1608MetricR11
1250mAFuse:Fuse_1206_3216MetricF1
1270Resistor_SMD:R_0603_1608MetricR7
147Resistor_SMD:R_0402_1005MetricR1
147kResistor_SMD:R_0603_1608MetricR5
1600@600MhzInductor_SMD:L_0805_2012MetricFB1
168kResistor_SMD:R_0603_1608MetricR3
1AO3401APackage_TO_SOT_SMD:SOT-23Q1
1BMI088BMI088:BMI088U6
1BMP280Package_LGA:Bosch_LGA-8_2x2.5mm_P0.65mm_ClockwisePinNumberingU5
1Conn_01x02Connector_Molex:Molex_PicoBlade_53048-0210_1x02_P1.25mm_HorizontalJ1
1Conn_02x05_Odd_EvenConnector_PinHeader_1.27mm:PinHeader_2x05_P1.27mm_Vertical_SMDJ9
1GREENLED_SMD:LED_0603_1608MetricD4
1INDUCTORInductor_SMD:L_Sunlord_MWSA0518_5.4x5.2mmL1
1MP2359DJPackage_TO_SOT_SMD:SOT-23-6U1
1REDLED_SMD:LED_0603_1608MetricD3
1STM32F405RGT6Package_QFP:LQFP-64_10x10mm_P0.5mmU2
1SW_SPDTButton_Switch_SMD:SW_SPDT_PCM12SW1
1USBLC6-2SC6Package_TO_SOT_SMD:SOT-23-6U4
1USB_B_MicroConnector_USB:USB_Micro-B_Wuerth_629105150521J2
1W25N01GVZEIG_TRWinbondFlash:W25N01GVZEIGU3

Similar boards

  • 4 layers55 × 55 mmRBoard, the printed circuit board in 3D

    RBoard

    pms67/LittleBrain-STM32F4-Sensorboard

    STM32F4-based PCB interfacing with a variety of sensors.

    90 parts339
  • 4 layers90 × 67 mmRBoard, the printed circuit board in 3D

    RBoard

    tatakimon/STM32F405-general-purpose

    This is an optimized, general-purpose development board powered by the STM32F405RGT6 microcontroller. It is designed for easy, low-cost manufacturing through the JLCPCB SMT Assembly service, while adding fun interactive…

    103 parts
  • 4 layers57 × 52 mmSTM32 based project, the printed circuit board in 3D

    STM32 based project

    majdbiw4200/STM32F405RGT-dev-board

    STM32 + USB + Buck Converter PCB Design

    50 parts3MIT
  • 4 layers60.7 × 40 mmSTM32F4 REV2, the printed circuit board in 3D

    STM32F4 REV2

    pravinsharma15k-ops/STM32F4-Test-Board

    STM32F405-based test board designed in KiCad 10, with buck converter, USB, SWD, I2C and UART.

    52 parts1
  • 4 layersSTM32 Development Board, the printed circuit board in 3D

    STM32 Development Board

    fabiokurti/Laburator-i-integruar-final

    🧪 STM32F1 Embedded Systems Assignments This repository contains schematic-based embedded system projects using STM32 microcontrollers.

    43 parts
  • 4 layers55.5 × 50.5 mmSTM32 Buck converter, the printed circuit board in 3D

    STM32 Buck converter

    kingMordred/STM32F4_buck_converter_pcb

    PCB design using KiCad 10.0 for an STM32F4 with a buck converter, usb connection, USART and I2c communication lines with the microcontroller and an external clock.

    53 parts
  • 4 layers55 × 55 mmSTM32+USB+BUCK, the printed circuit board in 3D

    STM32+USB+BUCK

    peterg0313210/STM32-USB-BUCK-Breakout-Board

    This project includes the schematic and PCB files as well as the necessary Gerber and assembly files for a circuit board with an STM32F405RGT6 processor with some breakout pins for access to a set of the I2C and UART…

    50 parts

Questions

How big is the Stm32 f4xx minimal PCB?

It measures 70.8 × 70.8 mm and has 4 copper layers, 4.69 mm thick.

What parts does the Stm32 f4xx minimal use?

79 parts, built around the STM32F405RGT6, BMP280, MP2359DJ-LF-Z and W25N01GVZEIGTR. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Stm32 f4xx minimal KiCad files?

From the amrithHN/stm32f4xx_minimal_dev repository on GitHub, at the commit this page was made from: the board is stm32_f4xx_minimal.kicad_pcb and its schematic connectors.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Stm32 f4xx minimal design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).