

MOTOR PCB-
- Size
- 55.5 × 56.3 mm
- Copper layers
- 4
- Thickness
- 0.19 mm
- Parts
- 57
- Nets
- 82
- Pads
- 226
- Tracks, vias
- 357, 81
- Pours
- 3
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 17 Jan 2024
- Updated
- 17 Jan 2024
Overview
MOTOR PCB- is an open-source printed circuit board by raduu-m, from the raduu-m/MOTOR_PCB- repository on GitHub. It is a 4-layer board of 55.5 × 56.3 mm with 57 parts on 82 nets, routed with 357 tracks and 81 vias.
It is built around the STM32F405RGT6, USBLC6-2SC6 and AO3401A. Its parts include 18 capacitors, 14 resistors, 6 connectors, 4 ICs and 4 diodes. It belongs with the robots and motor control boards and the STM32 boards of this library.
Main components
3STM32F405RGT6
LQFP-64(10x10)-40℃~+85℃ 1.8V~3.6V 12bit 12bit 168MHz 192KB 1MB 32 Bit 51 ARM Cortex-M4 Built-in FLASH LQFP-64(10x10) Microcontrollers (MCU/MPU/SOC) ROHSSTMicroelectronicsMicrocontrollers (MCU/MPU/SOC)USBLC6-2SC6
SOT-23-60.35pF、0.8pF 100nA 150W@8/20us 15V 2 5V 6A@8/20us 6V ESD SOT-23-6 ESD and Surge Protection (TVS/ESD) ROHSUMWESD And Surge Protection (TVS/ESD)AO3401A
SOT-231 P-Channel 14nC@10V 30V 47mΩ@10V、60mΩ@4.5V、85mΩ@2.5V 4A 55pF 645pF 80pF 900mV SOT-23 MOSFETs ROHSAlpha & Omega SemiconductorMOSFETs
Parts
57| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | 100n | Capacitor_SMD:C_0402_1005Metric | C4, C5, C6, C7, C8 |
| 4 | 2k2 | Resistor_SMD:R_0402_1005Metric | R9, R10, R13, R14 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad | H1, H2, H3, H4 |
| 3 | 10u | Capacitor_SMD:C_1206_3216Metric | C13, C15, C16 |
| 2 | 12p | Capacitor_SMD:C_0402_1005Metric | C11, C12 |
| 2 | 2u2 | Capacitor_SMD:C_0603_1608Metric | C1, C2 |
| 2 | Conn_01x04 | Connector_Molex:Molex_PicoBlade_53048-0410_1x04_P1.25mm_Horizontal | J3, J4 |
| 2 | D_Schottky_Small | Diode_SMD:D_SOD-123 | D2, D3 |
| 1 | 0.1u | Capacitor_SMD:C_0402_1005Metric | C18 |
| 1 | 100k | Resistor_SMD:R_0603_1608Metric | R4 |
| 1 | 10k | Resistor_SMD:R_0402_1005Metric | R1 |
| 1 | 10n | Capacitor_SMD:C_0603_1608Metric | C14 |
| 1 | 10n | Capacitor_SMD:C_0402_1005Metric | C10 |
| 1 | 10u | Capacitor_SMD:C_0402_1005Metric | C17 |
| 1 | 10u | Inductor_SMD:L_Sunlord_MWSA0518S | L1 |
| 1 | 15k | Resistor_SMD:R_0603_1608Metric | R7 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric | R11 |
| 1 | 1k5 | Resistor_SMD:R_0603_1608Metric | R3 |
| 1 | 1u | Capacitor_SMD:C_0402_1005Metric | C9 |
| 1 | 250mA | Fuse:Fuse_1206_3216Metric | F1 |
| 1 | 270 | Resistor_SMD:R_0603_1608Metric | R8 |
| 1 | 39n | Inductor_SMD:L_0402_1005Metric | L2 |
| 1 | 47 | Resistor_SMD:R_0402_1005Metric | R2 |
| 1 | 47k | Resistor_SMD:R_0603_1608Metric | R6 |
| 1 | 4u7 | Capacitor_SMD:C_0402_1005Metric | C3 |
| 1 | 600 @ 600 MHz | Inductor_SMD:L_0805_2012Metric | FB1 |
| 1 | 65k | Resistor_SMD:R_0603_1608Metric | R5 |
| 1 | AO3401A | Package_TO_SOT_SMD:SOT-23 | Q2 |
| 1 | BLUE | LED_SMD:LED_0603_1608Metric | D1 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_1.27mm:PinSocket_2x05_P1.27mm_Vertical_SMD | J2 |
| 1 | Crystal_GND24_Small | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm | Y1 |
| 1 | INA219AxD | Package_SO:SOIC-8_3.9x4.9mm_P1.27mm | U4 |
| 1 | Motor | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J5 |
| 1 | RED | LED_SMD:LED_0603_1608Metric | D4 |
| 1 | R_Shunt | Resistor_SMD:R_Shunt_Ohmite_LVK12 | R12 |
| 1 | STM32F405RGT6 | Package_QFP:LQFP-64_10x10mm_P0.5mm | U1 |
| 1 | SW_SPDT | Button_Switch_SMD:SW_SPDT_PCM12 | SW1 |
| 1 | Screw_Terminal_01x02 | TerminalBlock_Phoenix:TerminalBlock_Phoenix_PT-1,5-2-3.5-H_1x02_P3.50mm_Horizontal | J1 |
| 1 | USBLC6-2SC6 | Package_TO_SOT_SMD:SOT-23-6 | U3 |
| 1 | USB_C_Plug_USB2.0 | Connector_USB:USB_C_Plug_ShenzhenJingTuoJin_918-118A2021Y40002_Vertical | P1 |
| 1 | ~ | Package_TO_SOT_SMD:SOT-23-6 | U2 |
Similar boards
- 2 layers50 × 66 mm

- 4 layers70.8 × 70.8 mm

Stm32 f4xx minimal
amrithHN/stm32f4xx_minimal_dev
stm32f4 minimal dev board with few sensors
79 parts4GPL-3.0 - 4 layers57 × 52 mm

STM32 based project
majdbiw4200/STM32F405RGT-dev-board
STM32 + USB + Buck Converter PCB Design
50 parts3MIT - 4 layers60 × 56 mm

STM32F4 Breakout REV2
alphaseneca/pcb_design_repo
A repository for storing and documenting the pcb design files.
63 parts1MIT - 4 layers60.7 × 40 mm

STM32F4 REV2
pravinsharma15k-ops/STM32F4-Test-Board
STM32F405-based test board designed in KiCad 10, with buck converter, USB, SWD, I2C and UART.
52 parts1 - 4 layers57.5 × 50.9 mm

Stm32project
Codebreaker000/PCB_DESIGNS
Contains all PCB designs with Schematics and Board view file's and both pdf's to understand and gerber files and the view and layout of the PCB's.
50 parts - 4 layers156.6 × 143.1 mm

STM32F4 Breakout
DallasFormulaRacing/PneumaticPaddleShifting
An embedded system for the driver to perform up and down shifts with pneumatic paddle shifters.
56 parts - 4 layers

Questions
How big is the MOTOR PCB- PCB?
It measures 55.5 × 56.3 mm and has 4 copper layers, 0.19 mm thick.
What parts does the MOTOR PCB- use?
57 parts, built around the STM32F405RGT6, USBLC6-2SC6 and AO3401A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the MOTOR PCB- KiCad files?
From the raduu-m/MOTOR_PCB- repository on GitHub, at the commit this page was made from: the board is Kicad files/version1.kicad_pcb and its schematic Kicad files/version1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the MOTOR PCB- design in my own project?
Its repository states no licence, so its author keeps all rights: ask raduu-m before reusing the design.