Skip to the content
2 layers40.8 × 58.8 mmProject 1, the printed circuit board in 3D

This is a space for code elements of my professional portfolio.

Size
40.8 × 58.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
17
Nets
17
Pads
50
Tracks, vias
67, 4
Pours
1
Routed
Yes
KiCad
KiCad 7 (file 20221018)
Created
25 Oct 2023
Updated
8 Sep 2025

Overview

Project 1 is an open-source printed circuit board by radodge, from the radodge/Portfolio repository on GitHub. It is a 2-layer board of 40.8 × 58.8 mm with 17 parts on 17 nets, routed with 67 tracks and 4 vias.

It is built around the NE555D, PJ-002A and PTL20-10O0-105B2, with the TB002-500-02BE among its other parts. Its parts include 4 capacitors, 4 resistors, 2 ICs, 1 diode and 1 transistor.

Main components

4

README

README.md

Engineering Project Portfolio

Welcome to my collection of hardware and software projects developed through coursework and personal experimentation. This repository gathers small demos and complete applications spanning digital logic design, embedded C programming, PCB layout, ASIC development, and Python-based computer vision image processing.

Project Index

Use the categories below to jump directly to work that matches the relevant skills you're interested in.

Computer Vision Image Processing & Automation

Embedded Systems Design

Digital VLSI

PCB Design

  • KiCad Projects – Schematics and board layouts such as an adjustable power supply and a reprogrammable Game Boy Advance cartridge.

Contact

Questions or collaboration inquiries? Reach out via email at dodger1846@icloud.com or connect on LinkedIn.

Parts

17
QtyValueFootprintReferences
310KResistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR2, R3, R4
210uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC1, C2
10.1uFCapacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolderC4
11N4002Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD1
12.2KSMD Trimmer Potentiometer - 3314J-1-222E:TRIM_3314J-1-222ERV1
1240Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolderR1
13300uF3300uF Capacitor - ECA-1CHG332:ECA-1CHG332C3
1LM317_SOT-223Package_TO_SOT_THT:TO-220-3_VerticalU1
1NE555D555 Timer - NED555R:SOIC127P600X175-8NU2
1PJ-002APower Jack - PJ-002A:PJ-002AJ1
1PTL20-10O0-105B2Slide Potentiometer - PTL20-100O-105B2:PTL20-10O0-105B2RV2
1Q_NMOS_GDSPackage_TO_SOT_THT:TO-220-3_VerticalQ1
1STARTPushbutton Switch - D6C90 F2 LFS:D6C90F2LFSSW1
1TB002-500-02BETerminal Block - TB002-500-02BE:CUI_TB002-500-02BETB1

More from radodge/Portfolio

1
  • 4 layers51 × 57.3 mmGBA Cartridge, the printed circuit board in 3D

    GBA Cartridge

    radodge/Portfolio

    This is a space for code elements of my professional portfolio.

    39 parts1

Similar boards

  • 4 layers77.1 × 39.9 mmLEL Detector, the printed circuit board in 3D

    LEL Detector

    citrineio/LEL-Detector

    This project takes inspiration from my current job as a control and instrumentation engineer in the oil and gas industry.

    77 parts11
  • 4 layers50 × 75 mmOneroiV1, the printed circuit board in 3D

    OneroiV1

    HomeOnDuna/Nyx-Flight-Computers

    Contains the Nyx flight computer family developed for UNSW Rocketry Avionics team.

    166 parts1
  • 2 layers31.6 × 33.5 mmAC to DC Converter Circuit, the printed circuit board in 3D

    AC to DC Converter Circuit

    LordEbisu/AC-to-DC-Converter-Circuit

    Simple AC to DC converter using bridge rectifier and capacitors.

    12 parts1
  • 2 layers69.6 × 51.3 mmUSBCPD PCB, the printed circuit board in 3D

    USBCPD PCB

    Pryside/USBCPDto60V_HW

    the hardware portion of the USBC-PD Project

    65 parts1
  • 2 layers33.5 × 37 mmSumpPump, the printed circuit board in 3D

    SumpPump

    aidanogr/SumpPumpActivityMonitorPCB

    Transforms 7.7Vrms transformed signal from sump pump and converts it to 3VAC to be read by GPIO

    9 partsGPL-3.0
  • 2 layers105.5 × 81.1 mmBuck, the printed circuit board in 3D

    Buck

    almondsun/DynamicSystemsAndControl

    Dynamic Systems and Control coursework: Buck converter modeling, reports, KiCad PCB and STM32 firmware

    77 parts

Questions

How big is the Project 1 PCB?

It measures 40.8 × 58.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Project 1 use?

17 parts, built around the NE555D, PJ-002A, PTL20-10O0-105B2 and TB002-500-02BE. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Project 1 KiCad files?

From the radodge/Portfolio repository on GitHub, at the commit this page was made from: the board is KiCad Projects/Adjustable DC Timer Power Supply/Project_1.kicad_pcb and its schematic KiCad Projects/Adjustable DC Timer Power Supply/Project_1.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Project 1 design in my own project?

Its repository states no licence, so its author keeps all rights: ask radodge before reusing the design.