2 layers200 × 120 mm
Mainpcb
bot-hoven/bot-hoven-electrical
Electrical substem for Bot-Hoven. Includes KiCad files containing schematics and PCB designs for components in Bot-Hoven.
82 parts
2 layers69.6 × 51.3 mm
USBCPD PCB
Pryside/USBCPDto60V_HW1the hardware portion of the USBC-PD Project
- Size
- 69.6 × 51.3 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 65
- Nets
- 98
- Pads
- 247
- Tracks, vias
- 207, 92
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 21 May 2023
- Updated
- 14 Dec 2023
Overview
USBCPD PCB is an open-source printed circuit board by Pryside, from the Pryside/USBCPDto60V_HW repository on GitHub. It is a 2-layer board of 69.6 × 51.3 mm with 65 parts on 98 nets, routed with 207 tracks and 92 vias.
It is built around the UCC27282QDRQ1, TMCS1108A3BQDRQ1 and BAJ2CC0FP-E2, with the PDZ15B,115-JSM, SIR584DP-T1-RE3 and TB002-500-02BE among its other parts. Its parts include 16 capacitors, 15 resistors, 5 ICs, 5 diodes and 4 transistors.
Main components
12
UCC27282QDRQ1
SOIC-8-40℃~+150℃ 1.9V~2.4V 10ns 12ns 2 3A 3A 400uA 5.5V~16V 900mV~1.3V Half-Bridge MOSFET Under Voltage Protection SOIC-8 Gate Drivers ROHSTexas InstrumentsGate DriversTMCS1108A3BQDRQ1
SOIC-8-40℃~+125℃ 1.8mΩ 11.25A 200mV/A 3V~5.5V 6.5us 80kHz Overcurrent Protection、Bidirectional detection Support SOIC-8 Current Sensors ROHSTexas InstrumentsCurrent Sensors
BAJ2CC0FP-E2
TO-252-40℃~+125℃@(Ta) 1 12V 1A 25V 500mV@(500mA) 55dB@(120Hz) Fixed Over Current Protection、Over Temperature Protection、Over Voltage Protection Positive TO-252 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSROHM SemiconductorVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PDZ15B,115-JSM
SOD-323-55℃~+150℃ 1 Independent 100nA@11V 14.7V~15.3V 15V 300mW 40Ω ±2% SOD-323 Zener Diodes ROHSJSMSEMIZener Diodes
SIR584DP-T1-RE3
PowerPAK-SO-8MOSFETsVishay IntertechnologyTB002-500-02BE
插件插件 Screw Terminal Blocks ROHSCUIScrew Terminal Blocks
1.5SMBJ51CA-H
SMB(DO-214AA)-55℃~+150℃ 1.5kW 18.2A 1uA 51V 56.7V 82.4V Bidirectional IEC 61000-4-2、IEC 61000-4-5、IEC 61000-4-4 TVS SMB(DO-214AA) ESD and Surge Protection (TVS/ESD) ROHSBournsESD And Surge Protection (TVS/ESD)
150060BS75003
0603-40℃~+100℃ 140° 20mA 3.4V 465nm 465nm~475nm 550mcd Blue Discrete Diode Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete150060GS75003
0603-40℃~+100℃ 1.6cd 140° 20mA 3.2V 515nm 525nm Discrete Diode Green Water Clear 0603 LED Indication - Discrete ROHSWürth ElektronikLED Indication - Discrete150060SS75003
0603UncategorisedWürth ElektronikA768MS277M1VLAS022
SMD,10x12.2mm-55℃~+125℃ 10mm 12.2mm 2.2A@100kHz 2000hrs@125℃ 22mΩ@100kHz 270uF 35V Polarized Polymer ±20% SMD,10x12.2mm Polymer Aluminum Capacitors ROHSKEMETPolymer Aluminum Capacitors
EEE-TP1K391M
SMD,D16xL16.5mm-55℃~+125℃ 1.9A@100kHz 100mΩ@100kHz 16mm 17mm 3000hrs@125℃ 390uF 80V ±20% SMD,D16xL16.5mm Aluminum Electrolytic Capacitors - SMD ROHSPanasonicAluminum Electrolytic Capacitors - SMD
README
README.mdUSBCPDto60V_HW
the hardware portion of the USBC-PD Project
Software here: https://github.com/Pryside/USBCPDto60V
KiCad Project Files
Note: This is just a development Board, not the finished product. For testing purposes.
Done:
- ADC Voltage Measurement
- ADC Bi-Dir Current Measurement
- HRTimer D
- HRTimer C
- Full Bi-Directional Converter
To Do:
- Lower Noise on ADCs
- double check new Timer Routing
- Update ADC channel inputs
Parts
65| Qty | Value | Footprint | References |
|---|---|---|---|
| 10 | TestPoint | TestPoint:TestPoint_Pad_D1.0mm | TP1, TP2, TP3, TP4, TP5, TP6, TP7, TP8, TP9, TP10 |
| 5 | 1R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R1, R2, R5, R6, R7 |
| 4 | 1nF 25V | Capacitor_SMD:C_0402_1005Metric_Pad0.74x0.62mm_HandSolder | C9, C12, C13, C16 |
| 4 | 3R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R3, R4, R12, R15 |
| 4 | GRM32DL8EL475KE07K | SamacSys_Parts:CAPC3225X220N | C3, C5, C6, C7 |
| 4 | PDZ15B,115 | SamacSys_Parts:SOD2512X110N | Z1, Z2, Z3, Z4 |
| 4 | SIR584DP-T1-RE3 | SamacSys_Parts:SIR584DPT1RE3 | Q1, Q2, Q3, Q4 |
| 2 | 0.1uF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C11, C15 |
| 2 | 100R | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R8, R11 |
| 2 | 4.7uF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C10, C14 |
| 2 | TB002-500-02BE | SamacSys_Parts:TB00250002BE | J1, J2 |
| 2 | UCC27282QDRQ1 | SamacSys_Parts:SOIC127P600X175-8N | IC2, IC3 |
| 1 | 0.33uF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C4 |
| 1 | 1.5SMBJ51CA-H | SamacSys_Parts:DIONM5436X244N | D2 |
| 1 | 150060BS75003 | SamacSys_Parts:150060BS75003 | LED1 |
| 1 | 150060GS75003 | SamacSys_Parts:LEDC1608X80N | LED2 |
| 1 | 150060SS75003 | SamacSys_Parts:150060SS75003 | LED3 |
| 1 | 16k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R10 |
| 1 | 1K62 | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R14 |
| 1 | 1k | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R9 |
| 1 | 1uF 25V | Capacitor_SMD:C_0603_1608Metric_Pad1.08x0.95mm_HandSolder | C1 |
| 1 | 28K | Resistor_SMD:R_0603_1608Metric_Pad0.98x0.95mm_HandSolder | R13 |
| 1 | A768MS277M1VLAS022 | SamacSys_Parts:CAPAE1030X1270N | C2 |
| 1 | BAJ2CC0FP-E2 | SamacSys_Parts:BD750L5FPCE2 | IC4 |
| 1 | EEE-TP1K391M | SamacSys_Parts:EEEFK0J682AM | C8 |
| 1 | EVP-BDCC1A000 | SamacSys_Parts:EVPBDCC1A000 | S1 |
| 1 | LOGO | Logos:hhn_logo | G*** |
| 1 | NUCLEO-G474RE | USBC_PD:ST_NUCLEO-G474RE | U1 |
| 1 | SRP1038WA-150M | SamacSys_Parts:SRP1038WA150M | L1 |
| 1 | SolderJumper_2_Bridged | Jumper:SolderJumper-2_P1.3mm_Bridged_RoundedPad1.0x1.5mm | JP1 |
| 1 | T4F24AHM3_I | SamacSys_Parts:SODFL3718X108N | D1 |
| 1 | TMCS1108A3BQDRQ1 | SamacSys_Parts:SOIC127P600X175-8N | IC1 |
Similar boards
- 4 layers77.1 × 39.9 mm
LEL Detector
citrineio/LEL-Detector
This project takes inspiration from my current job as a control and instrumentation engineer in the oil and gas industry.
77 parts11 - 6 layers62 × 77 mm
Black Body Temperature Sensor PCB
DylanLockyer/Black_Body
Electrical system for black body MKID tester
217 parts1MIT - 4 layers50 × 75 mm
OneroiV1
HomeOnDuna/Nyx-Flight-Computers
Contains the Nyx flight computer family developed for UNSW Rocketry Avionics team.
166 parts1 - 2 layers174.2 × 124 mm
- 2 layers31.6 × 33.5 mm
AC to DC Converter Circuit
LordEbisu/AC-to-DC-Converter-Circuit
Simple AC to DC converter using bridge rectifier and capacitors.
12 parts1 - 2 layers33.5 × 37 mm
SumpPump
aidanogr/SumpPumpActivityMonitorPCB
Transforms 7.7Vrms transformed signal from sump pump and converts it to 3VAC to be read by GPIO
9 partsGPL-3.0 - 2 layers105.5 × 81.1 mm
Buck
almondsun/DynamicSystemsAndControl
Dynamic Systems and Control coursework: Buck converter modeling, reports, KiCad PCB and STM32 firmware
77 parts
Questions
How big is the USBCPD PCB PCB?
It measures 69.6 × 51.3 mm and has 2 copper layers, 1.6 mm thick.
What parts does the USBCPD PCB use?
65 parts, built around the UCC27282QDRQ1, TMCS1108A3BQDRQ1, BAJ2CC0FP-E2 and PDZ15B,115-JSM. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the USBCPD PCB KiCad files?
From the Pryside/USBCPDto60V_HW repository on GitHub, at the commit this page was made from: the board is USBCPD_PCB/USBCPD_PCB.kicad_pcb and its schematic USBCPD_PCB/USBCPD_PCB.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the USBCPD PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask Pryside before reusing the design.