
GameboyCartridgeV1.1
shilga/rp-gameboy-cartridge-hw
You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.

Simple HUB12 LED matrices USB controller using RP2040
Hub12-controller hw is an open-source printed circuit board by radioegor146, from the radioegor146/hub12-controller repository on GitHub, published under the GPL-3.0 licence. It is a 2-layer board of 100 × 100 mm with 88 parts on 234 nets, routed with 991 tracks and 239 vias.
It is built around the RP2040, 74HC245D and W25Q128JVSIQ, with the TXB0108PW and AMS1117-3.3 among its other parts. Its parts include 30 capacitors, 18 ICs, 14 connectors, 7 resistors and 2 diodes. It belongs with the RP2040 boards of this library.
Simple HUB12 LED matrices USB controller using RP2040 Currently it is ready to use for 224x192 (7x12) 32x16 monochrome (red) matrices It uses:
It achieves:
Pins are set in this file
| Qty | Value | Footprint | References |
|---|---|---|---|
| 24 | 0.1uF | Capacitor_SMD:C_0805_2012Metric | C1, C2, C3, C10, C11, C12, C13, C14, C18, C19, C20, C21, C22, C26, C29, C30 +8 |
| 12 | 74HC245 | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U2, U3, U4, U5, U6, U7, U8, U9, U10, U11, U12, U13 |
| 12 | HUB12 | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J1, J2, J3, J4, J5, J6, J7, J8, J9, J10, J11, J12 |
| 4 | ~ | MountingHole:MountingHole_3.2mm_M3_DIN965_Pad_TopBottom | H1, H2, H3, H4 |
| 3 | 5.1k | Resistor_SMD:R_0805_2012Metric | R3, R4, R5 |
| 3 | TXB0108PW | Package_SO:TSSOP-20_4.4x6.5mm_P0.65mm | U16, U17, U18 |
| 2 | 10uF | Capacitor_SMD:C_0805_2012Metric | C24, C25 |
| 2 | 1uF | Capacitor_SMD:C_0805_2012Metric | C15, C23 |
| 2 | 200 | Resistor_SMD:R_0805_2012Metric | R6, R7 |
| 2 | 27.4 | Resistor_SMD:R_0805_2012Metric | R1, R2 |
| 2 | ? | Capacitor_SMD:C_0805_2012Metric | C27, C28 |
| 2 | DEBUG | LED_SMD:LED_0805_2012Metric | D1, D2 |
| 1 | 12MHz | Crystal:Crystal_SMD_3225-4Pin_3.2x2.5mm_HandSoldering | Y1 |
| 1 | AMS1117-3.3 | Package_TO_SOT_SMD:SOT-223-3_TabPin2 | U14 |
| 1 | BOOTSEL | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW1 |
| 1 | RESET | Button_Switch_SMD:SW_Push_SPST_NO_Alps_SKRK | SW2 |
| 1 | RP2040 | Package_DFN_QFN:QFN-56-1EP_7x7mm_P0.4mm_EP3.2x3.2mm | U1 |
| 1 | SWD | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J14 |
| 1 | USB | Connector_USB:USB_Mini-B_Wuerth_65100516121_Horizontal | J13 |
| 1 | W25Q128JVS | Package_SO:SOIC-8_5.3x5.3mm_P1.27mm | U15 |
The 78 most common of 88 parts.

shilga/rp-gameboy-cartridge-hw
You should order with ENIG (electroless nickel immersion gold) plating. While the cartridge will work with HASL you will getter contact with ENIG and it is less prone to wearing down.

baldengineer/Mega-IIe
Using the Mega II from a IIgs to make a Apple IIe compatible computer: The Mega IIe!



hazy2go/kagiboy
A hardware wallet that lives in a Game Boy cartridge. Real ROM, Solana + EVM, every signature approved on the Game Boy's own screen.


jayis1/hacker-devices
Full-cycle hardware designs for security research devices — each device is a subfolder with its own README, schematics, PCB layout, and software stack

It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
88 parts, built around the RP2040, 74HC245D, W25Q128JVSIQ and TXB0108PW. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the radioegor146/hub12-controller repository on GitHub, at the commit this page was made from: the board is hardware/hub12-controller-hw.kicad_pcb and its schematic hardware/buffer.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).