

Power
Dude, where's my bike?!
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 10
- Nets
- 10
- Pads
- 58
- Tracks, vias
- 27, 0
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 18 Dec 2015
- Updated
- 24 Dec 2015
Overview
Power is an open-source printed circuit board by qweqq, from the qweqq/dwmb repository on GitHub, published under the MIT licence. It is a 2-layer board with 10 parts on 10 nets, routed with 27 tracks and 0 vias.
It is built around the RJ45. Its parts include 5 connectors and 2 capacitors.
Main components
1README
README.mddwmb
Dude, where's my bike?!
Goals
Build a system that notifies you/a guard/a group of people if someone is trying to steal your bike! (and in case it is stolen provide information)
Parts
10| Qty | Value | Footprint | References |
|---|---|---|---|
| 3 | VAL** | Mounting_Holes:MountingHole_3mm | MountingHole_3mm, MountingHole_3mm, MountingHole_3mm |
| 1 | 100n | Capacitors_ThroughHole:Capacitor6MMDiscRM5 | C2 |
| 1 | 100u | Capacitors_ThroughHole:Capacitor16x25RM7.5 | C1 |
| 1 | 5V | barrel:BARREL_JACK | CON1 |
| 1 | CONN_02X05 | Pin_Headers:Pin_Header_Straight_2x05 | P1 |
| 1 | RJ45 | rj45:RJ45_SOLDER | J2 |
| 1 | RJ45 | rj45:RJ45_8_BIG | J1 |
| 1 | USB_A | usb:USB_A | J3 |
More from qweqq/dwmb
2- 2 layers

- 2 layers

Similar boards
- 2 layers33.7 × 97.8 mm

HAN ESP TSS721
UtilitechAS/amsreader-firmware
ESP8266 and ESP32 compatible firmware to read, interpret and publish data to MQTT from smart electrical meters, both DLMS and DSMR is supported
29 parts470 - 4 layers84 × 82 mm

Toad
travisgoodspeed/goodfet
An embedded bus adapter for various microcontrollers and radios.
241 parts333 - 2 layers100 × 100 mm

- 2 layers50 × 55.4 mm

- 2 layers67.9 × 47.8 mm

Platine
nv1t/standing-desk-interceptor
I wanted to intercept the communication between my Flexispot standing desk buttons. This is the progress on the project
11 parts52CC0-1.0 - 4 layers90 × 75 mm

- 4 layers73.9 × 84.5 mm

Aei
Severson-Group/AMDC-Hardware
Circuit board designs for controlling advanced motor systems
54 parts51 - 2 layers99 × 60 mm

Pwr
mfkiwl/KiwiSDR_PCB
KiCAD PCB files for KiwiSDR project including active antenna and bias tee
64 parts46
Questions
What parts does the Power use?
10 parts, built around the RJ45. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Power KiCad files?
From the qweqq/dwmb repository on GitHub, at the commit this page was made from: the board is electronics/power/power.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Power design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).