
Output pcb
QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

A collection of free & open source DIY synthesizer module designs for Eurorack
Biodata pcb is an open-source printed circuit board by QuinnFreedman, from the QuinnFreedman/modular repository on GitHub. It is a 2-layer board of 75.6 × 100 mm with 56 parts on 81 nets, routed with 425 tracks and 10 vias.
It is built around the TEA 1-0505, MCP4922-E/P and TL072, with the NE555P among its other parts. Its parts include 18 resistors, 11 connectors, 10 capacitors, 5 ICs and 2 transistors. It belongs with the audio and music boards and the AVR (ATmega, ATtiny) boards of this library.
This project is an attempt to make Eurorack modular synthesis affordable and accessible to everyone.
This repository contains open source software and hardware schematics for Eurorack modules which are designed to be assembled easily and cheaply without any technical knowledge. Every module should be able to be assembled for around $20 in about an hour of work, even with limited experience.
To get started, check out some of the links below. Or get in touch! Send me a message at freemodular@gmail.com. Follow my reddit, Etsy shop, or GitHub.
Happy travels on your modular journey!
{% include_relative docs/modules.md %}
| Qty | Value | Footprint | References |
|---|---|---|---|
| 8 | 1kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R1, R6, R7, R13, R14, R15, R16, R17 |
| 6 | THONKICONN | FreeModular:THONKICONN | J1, J2, J3, J4, J5, J6 |
| 5 | 100nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C3, C4, C7, C8, C9 |
| 3 | 10kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R8, R11, R12 |
| 2 | 100kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R4, R5 |
| 2 | 10uF | Capacitor_THT:CP_Radial_D4.0mm_P1.50mm | C6, C12 |
| 2 | 1MΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R2, R3 |
| 2 | 220kΩ | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R9, R10 |
| 2 | 2N3904 | Package_TO_SOT_THT:TO-92L_Inline_Wide | Q1, Q2 |
| 2 | 50kΩ | FreeModular:Potentiometer_Alpha_Single_Vertical_trim | RV2, RV3 |
| 2 | Board | kikit:Board | B1, B2 |
| 2 | M2.5 Mounting Hole | MountingHole:MountingHole_2.7mm_M2.5 | H1, H2 |
| 1 | 100pF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C10 |
| 1 | 100Ω | Resistor_THT:R_Axial_DIN0207_L6.3mm_D2.5mm_P10.16mm_Horizontal | R18 |
| 1 | 10nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C1 |
| 1 | 1nF | Capacitor_THT:C_Disc_D4.7mm_W2.5mm_P5.00mm | C2 |
| 1 | 50kΩ | Potentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_Vertical | RV1 |
| 1 | Arduino_Nano_v3.x | Module:Arduino_Nano | A1 |
| 1 | Conn_01x06_Pin | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J15 |
| 1 | Conn_01x06_Socket | Connector_PinSocket_2.54mm:PinSocket_1x06_P2.54mm_Vertical | J14 |
| 1 | Conn_01x07_Pin | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J19 |
| 1 | Conn_01x07_Socket | Connector_PinSocket_2.54mm:PinSocket_1x07_P2.54mm_Vertical | J18 |
| 1 | Eurorack_2x8_Power | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J7 |
| 1 | LED | LED_THT:LED_D5.0mm | D1 |
| 1 | MCP4922 | Package_DIP:DIP-14_W7.62mm | U5 |
| 1 | NE555P | Package_DIP:DIP-8_W7.62mm | U1 |
| 1 | PC817 | Package_DIP:DIP-4_W7.62mm | U4 |
| 1 | TEA1-0505 | Converter_DCDC:Converter_DCDC_TRACO_TEA1-xxxx_THT | U3 |
| 1 | TL072 | Package_DIP:DIP-8_W7.62mm | U2 |
The 55 most common of 56 parts.

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack

QuinnFreedman/modular
A collection of free & open source DIY synthesizer module designs for Eurorack



chrkir/hcv
Local Viessmann E3 CAN-bus to MQTT bridge for Vitocal heat pumps. Features Home Assistant Auto-Discovery, ESP32 firmware, and Open Hardware.


nichtrami/led_tube
A LED Tube that works wireless and runs on a ESP32 with Arduino Framework

RainbowLabsDE/PowerMeasure_1Ph
this repo is still undergoing major changes and should not yet be rebuilt


It measures 75.6 × 100 mm and has 2 copper layers, 1.6 mm thick.
56 parts, built around the TEA 1-0505, MCP4922-E/P, TL072 and NE555P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the QuinnFreedman/modular repository on GitHub, at the commit this page was made from: the board is modules/Biodata/PCBs/biodata_pcb/biodata_pcb.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask QuinnFreedman before reusing the design.