Skip to the content
2 layers141.8 × 24.9 mmPowerBoth, the printed circuit board in 3D

The electrical schematics and PCB layout for the CR101 boards.

Size
141.8 × 24.9 mm
Copper layers
2
Thickness
1.6 mm
Parts
48
Nets
28
Pads
147
Tracks, vias
202, 119
Pours
25
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
23 Apr 2020
Updated
18 Jan 2021

Overview

PowerBoth is an open-source printed circuit board by quezadaminter, from the quezadaminter/CR101kc repository on GitHub, published under the MIT licence. It is a 2-layer board of 141.8 × 24.9 mm with 48 parts on 28 nets, routed with 202 tracks and 119 vias.

It is built around the LM3488MM, B330A-13-F-MS and PJ-079AH. Its parts include 4 diodes, 3 capacitors, 3 connectors, 2 resistors and 2 ICs.

Main components

3

README

README.md

CR101kc

The electrical schematics and PCB layout for the CR101 boards.

Screenshot

Firmware

https://github.com/quezadaminter/CR101fw

User code

https://github.com/quezadaminter/CR101py

Screenshot
Screenshot
Screenshot

Parts

48
QtyValueFootprintReferences
5@HOLE0, @HOLE1, @HOLE2, @HOLE3, @HOLE4
347uFPowerBoard-Boost-v2:C1206COUT301, COUT302, COUT303
3B330A-13PowerBoard:SMA-MD201, D202, D203
23.3uFPowerBoard-Boost-v2:C0805CSEP301, CSEP302
23.3uFPowerBoard-Boost-v2:153CLV-0505CIN301, CIN302
2IRF7205PowerBoard:8SOICM201, Q201
2TEST_POINTROUND-1MMPowerBoard:TEST_POINT_ROUND_1MMTP201, TP202
10.009PowerBoard-Boost-v2:R1206RSENSE301
10.1uFPowerBoard:C1210C201
10.1uFPowerBoard-Boost-v2:C1206CBP301
10.47uFPowerBoard:C0603CC201
10.47uFPowerBoard-Boost-v2:C1206CCOMP302
11.5nFPowerBoard-Boost-v2:C0805CFILT301
1100PowerBoard-Boost-v2:R1206RFILT301
110kPowerBoard-Boost-v2:R1206RFB302
110uFPowerBoard:C1210C202
115nFPowerBoard-Boost-v2:C0805CCOMP301
120PowerBoard-Boost-v2:R0805RBP301
1215PowerBoard-Boost-v2:R0805RCOMP301
122uFPowerBoard:C1210C203
129.4KPowerBoard-Boost-v2:R1206RFB301
12KPowerBoard:R1206R201
12MM-1X5PowerBoard:2MM_1X5J202
12X10-2MMSMDMarcoK:2X10-2MMJ302
156KPowerBoard:1206R202
16.8uHPowerBoard:IND_B952AS-H-220M=P3L201
168mOhmsPowerBoard:R1206RSENSE201
176.8KPowerBoard-Boost-v2:R0805RFADJ301
1Charger+PowerBoard-Boost-v2:TEST_POINT_ROUND_1MMTP301
1INDUCTOR_DUALPowerBoard-Boost-v2:DRQ125L301
1LM3488PowerBoard-Boost-v2:DGK8-MU301
1LTC4002ES8-4.2PBFSO-8_S-MPowerBoard:SO-8_S-MU201
1MOSFET_NSI4778DYPowerBoard-Boost-v2:8SOICM301
1PJ-079AHPowerBoard:CUI_PJ-079AHJ201
1R-US_R1206PowerBoard:R1206RC201
1SL44-E3_57TDIODE_DO214AB-MPowerBoard-Boost-v2:DIODE_DO214AB-MD301

More from quezadaminter/CR101kc

3
  • 2 layers157.1 × 85.3 mmCPU, the printed circuit board in 3D

    CPU

    quezadaminter/CR101kc

    The electrical schematics and PCB layout for the CR101 boards.

    100 partsMIT
  • 2 layers70 × 24.9 mmPowerBoard Boost v2, the printed circuit board in 3D

    PowerBoard Boost v2

    quezadaminter/CR101kc

    The electrical schematics and PCB layout for the CR101 boards.

    28 partsMIT
  • 2 layers71.8 × 24.9 mmPowerBoard, the printed circuit board in 3D

    PowerBoard

    quezadaminter/CR101kc

    The electrical schematics and PCB layout for the CR101 boards.

    23 partsMIT

Similar boards

  • 2 layers67.2 × 79.8 mmIC880A shield v1.2, the printed circuit board in 3D

    IC880A shield v1.2

    SIMATICmeetsLinux/IOT2050-LoRaGateway-Arduino

    Instructions for using the IOT2050 as a LoRaWAN (Long Range Wide Area Nework) gateway with The Things Network as the network server. LoRaWAN Concentrator is realized with an Arduino Shield.

    29 parts5MIT
  • 4 layers99.8 × 94.6 mmOresat batteries, the printed circuit board in 3D

    Oresat batteries

    oresat/oresat-batteries

    Battery board for OreSat

    354 parts29
  • 2 layers98.8 × 69.9 mmCameraTriggerSensorNodeOnly, the printed circuit board in 3D

    CameraTriggerSensorNodeOnly

    chrocket/RocketTrig

    A camera controller for photographing high poweed model rockets

    65 parts3GPL-3.0
  • 4 layers165.4 × 105.7 mmEcdl laser bboard, the printed circuit board in 3D

    Ecdl laser bboard

    mahdi-kh1265/780nm-ecdl-electronics

    Control, interface, piezo-actuation, and power electronics for POSM's 780 nm Littrow external-cavity diode laser.

    204 partsMIT
  • 2 layers40 × 60 mmSTM8003f3p development board, the printed circuit board in 3D

    STM8003f3p development board

    niksrajendra/stm8-bootloader-extended

    STM8 bootloader designed to work with any available communication interface and configure for different feature like secure, unsecure bootloader.

    131 parts
  • 2 layers46.6 × 36.2 mmCold start power supply, the printed circuit board in 3D

    Cold start power supply

    whitfijs-jw/Volvo240-DigitalDash

    Volvo 240 Digital Dash Project. It's not much, but its honest work.

    29 parts72MIT
  • 2 layers46 × 23 mmNixie ps, the printed circuit board in 3D

    Nixie ps

    esynr3z/nixie-ps

    High voltage power supply for nixie tubes

    19 parts8

Questions

How big is the PowerBoth PCB?

It measures 141.8 × 24.9 mm and has 2 copper layers, 1.6 mm thick.

What parts does the PowerBoth use?

48 parts, built around the LM3488MM, B330A-13-F-MS and PJ-079AH. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the PowerBoth KiCad files?

From the quezadaminter/CR101kc repository on GitHub, at the commit this page was made from: the board is PowerBoard/PowerBoth.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the PowerBoth design in my own project?

Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).