Skip to the content
2 layers46 × 23 mmNixie ps, the printed circuit board in 3D

High voltage power supply for nixie tubes

Size
46 × 23 mm
Copper layers
2
Thickness
1.6 mm
Parts
19
Nets
16
Pads
58
Tracks, vias
60, 28
Pours
7
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
10 Aug 2018
Updated
25 Sep 2018

Overview

Nixie ps is an open-source printed circuit board by esynr3z, from the esynr3z/nixie-ps repository on GitHub. It is a 2-layer board of 46 × 23 mm with 19 parts on 16 nets, routed with 60 tracks and 28 vias.

It is built around the LM3488MM, E1G and SMBJ70CA. Its parts include 5 resistors, 4 capacitors, 2 diodes, 2 connectors and 1 IC. It belongs with the lEDs and displays and power boards of this library.

Main components

3

README

README.md

Nixie power supply

Features

High voltage flyback converter for nixie tubes

  • Input voltage: 5V - 12V
  • Output voltage: 150V - 200V
  • Output power: 180V 20mA @ 5V in, 180V 40mA @ 12V in

nixies

Board

Schematic and pcb layout created in KiCad 6 Nightly Build (compatible with KiCad 5). Converter also have been simulated with LTspice XVII.

schematic pcb top pcb bottom

Order board v1.0 from OSH Park

Testing

5V input

Drain and gate oscillograms: osc 5v

Measured characteristics:

Vin, VIin, mAPin, WRload, kOhmVout, VIout, mAPout, WEff, %
5,34820,44NC180,7---
5,212781,4537,6180,44,60,8357,29
5,163741,9328,2180,26,31,1458,83
5,075492,7818,8180,09,51,7161,43
4,927303,5914,1179,912,72,2863,61
4,6111705,399,4179,519,23,4563,90

12V input

Drain and gate oscillograms: osc 12v

Measured characteristics:

Vin, VIin, mAPin, WRload, kOhmVout, VIout, mAPout, WEff, %
12,52170,21NC180,4---
12,391952,4237,6177,94,40,7832,40
12,382172,6928,2177,86,01,0739,71
12,362493,0818,8177,69,21,6353,09
12,322733,3614,1177,612,32,1864,95
12,283264,009,4177,918,93,3683,99
12,007899,474,7176,738,16,7371,11

Notes

  • Output current limit can configured with R5 resistor. Less value - more current, but also more heating. With values <0.025 ohm converter may become unstable.
  • D1 diode should be replaced with bigger one for operating with maximum current at 12V. Current SOD-123FL diode can be easily thermal destroyed in this mode.

To do ...

  • Improve mosfet layout for better heat dissipation
  • Replace one shunt resistor (this values are rare) with 2-3 more generic nominals connected in parallel
  • Add test points for drain and gate nets for debugging purpose
  • More current, less temperature, more effeciency and etc.

Parts

19
QtyValueFootprintReferences
2Conn_01x04_Malelib_fp:PinHeader_1x04_P2.54mm_VerticalJ1, J2
10.01ulib_fp:0805C4
10.033lib_fp:2010R5
10.47ulib_fp:1812C2
11.2Mlib_fp:0805R1
1100ulib_fp:CP_Elec_6.3x5.4C1
122nlib_fp:0805C3
14.7klib_fp:0805R3
147klib_fp:0805R4
17.5klib_fp:0805R2
1E1Glib_fp:SOD-123FLD1
1EFD15_2WIlib_fp:EFD15_B66414W1008D001T1
1IRFH7185TRPBFlib_fp:PQFN_5X6MMQ1
1LM3488MMlib_fp:VSSOP-8_3.0x3.0mm_P0.65mmU1
1LOGOlib_fp:esynr3z_logo_7.3x13.5mm_SilkG***
1PVZ3A152lib_fp:Murata_PVZ3ARV1
1SMBJ70CAlib_fp:SMBD2

The 18 most common of 19 parts.

Similar boards

  • 2 layers46.6 × 36.2 mmCold start power supply, the printed circuit board in 3D

    Cold start power supply

    whitfijs-jw/Volvo240-DigitalDash

    Volvo 240 Digital Dash Project. It's not much, but its honest work.

    29 parts72MIT
  • 2 layers100 × 100 mmFuentes, the printed circuit board in 3D

    Fuentes

    darioGg3/PowerSuppliesTester

    97 parts1GPL-3.0
  • 2 layers47.6 × 90.2 mmRoben, the printed circuit board in 3D

    Roben

    akornsys-rdi/robgednaut

    Robust and easy-to-use introduction-to-robotics platform

    92 parts
  • 4 layers101.6 × 101.6 mmGps seven seg clock v2, the printed circuit board in 3D

    Gps seven seg clock v2

    JWehle/gps-seven-seg-clock

    A large seven segment clock that uses highly accurate GPS time.

    99 partsApache-2.0
  • 2 layers138 × 53 mmNixie alarm main board, the printed circuit board in 3D

    Nixie alarm main board

    wojciechpaderewski/Nixie_alarm_clock

    Home assistant integrated

    124 parts
  • 4 layers160 × 90 mmVESC controller, the printed circuit board in 3D

    VESC controller

    paltatech/VESC-controller

    Made open source with KiCAD, an open source EDA tool.

    342 parts356
  • 2 layers141.8 × 24.9 mmPowerBoth, the printed circuit board in 3D

    PowerBoth

    quezadaminter/CR101kc

    The electrical schematics and PCB layout for the CR101 boards.

    48 partsMIT

Questions

How big is the Nixie ps PCB?

It measures 46 × 23 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Nixie ps use?

19 parts, built around the LM3488MM, E1G and SMBJ70CA. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Nixie ps KiCad files?

From the esynr3z/nixie-ps repository on GitHub, at the commit this page was made from: the board is nixie-ps.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Nixie ps design in my own project?

Its repository states no licence, so its author keeps all rights: ask esynr3z before reusing the design.