2 layers54.6 × 89.5 mm
2 layers254 × 94 mm
ShutterDriver
QuantumQuadrate/ShutterDriverV2.0- Size
- 254 × 94 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 80
- Nets
- 47
- Pads
- 206
- Tracks, vias
- 172, 83
- Pours
- 20
- Routed
- Yes
- KiCad
- KiCad 7 (file 20221018)
- Created
- 11 Dec 2023
- Updated
- 11 Dec 2023
Overview
ShutterDriver is an open-source printed circuit board by QuantumQuadrate, from the QuantumQuadrate/ShutterDriverV2.0 repository on GitHub. It is a 2-layer board of 254 × 94 mm with 80 parts on 47 nets, routed with 172 tracks and 83 vias.
It is built around the SN74LS06DR(LX). Its parts include 22 capacitors, 16 connectors, 13 ICs and 12 resistors.
Main components
1Parts
80| Qty | Value | Footprint | References |
|---|---|---|---|
| 14 | TestPoint | TestPoint:TestPoint_Keystone_5019_Minature | 5V_FILTERED1, 5V_RAW1, 10V_1, 10V_2, 10V_3, 10V_4, 10V_5, 10V_6, 12V_FILTERED1, 12V_RAW1, GND1, GND2, GND3, GND4 |
| 8 | 330 uF | Capacitor_SMD:CP_Elec_8x11.9 | C12, C13, C14, C15, C19, C20, C21, C22 |
| 6 | 0.47uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C9, C10, C11, C16, C17, C18 |
| 6 | 1K Ohms | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R7, R8, R9, R10, R11, R12 |
| 6 | 220 Ohms | FMP200FRF52_220R:YAG_FMP200_YAG | R1, R2, R3, R4, R5, R6 |
| 6 | 220uF | Capacitor_THT:CP_Radial_D10.0mm_P5.00mm | C1, C2, C3, C4, C5, C6 |
| 6 | Conn_01x02_Pin | Connector_Molex:Molex_KK-396_A-41791-0002_1x02_P3.96mm_Vertical | J7, J8, J9, J10, J11, J12 |
| 6 | Conn_Coaxial | CONBNC002:LINX_CONBNC002 | J1, J2, J3, J4, J5, J6 |
| 6 | LM2940IMP-10/NOPB | LM2940IMP_10_NOPB:DCY0004A_M | U8, U9, U10, U11, U12, U13 |
| 6 | TB6568KQ_8 | TB6568KQ_8:HSIP7-P-2p54A_TOS | U1, U2, U3, U4, U5, U6 |
| 4 | Conn_01x01_Socket | Connector_Pin:Pin_D1.3mm_L11.0mm_LooseFit | J13, J14, J15, J16 |
| 1 | 0.01uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C7 |
| 1 | 0.1uF | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C8 |
| 1 | 120 Ohms @ 100MHz 6A | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB1 |
| 1 | 1K Ohms @ 100MHz 1A | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | FB2 |
| 1 | LOGO | LOGO | G*** |
| 1 | SN74LS06DR | SN74LS06DR:SOIC127P600X175-14N | U7 |
Questions
How big is the ShutterDriver PCB?
It measures 254 × 94 mm and has 2 copper layers, 1.6 mm thick.
What parts does the ShutterDriver use?
80 parts, built around the SN74LS06DR(LX). The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the ShutterDriver KiCad files?
From the QuantumQuadrate/ShutterDriverV2.0 repository on GitHub, at the commit this page was made from: the board is ShutterDriver/ShutterDriver.kicad_pcb and its schematic ShutterDriver/ShutterDriver.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the ShutterDriver design in my own project?
Its repository states no licence, so its author keeps all rights: ask QuantumQuadrate before reusing the design.
Similar boards
- 2 layers130.4 × 76.6 mm
Gb stream cart
Staacks/gbinterceptor
Capture or stream Game Boy gameplay footage via USB without modifying the Game Boy.
80 parts542 - 2 layers100 × 100 mm
EleLab v2 Bus100
Chrismettal/EleLab_v2
Cheap DIY lab system for hobbyists and the tinkering folk
80 parts531GPL-3.0 - 2 layers59.6 × 109.5 mm
Kivu12
ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust
80 parts410 - 2 layers137.9 × 92.7 mm
ErgoTravel
jpconstantineau/ErgoTravel
A Portable Ergonomic Split Keyboard inspired from the ErgoDox, Let's Split and Minidox
80 parts284MIT - 2 layers219.1 × 66.7 mm
Stonehenge30
marksard/Keyboards
This repository is warehouse of my keyboard architecture.
80 parts193MIT - 2 layers99.1 × 99.7 mm
RC6502 General Video Adapter
tebl/RC6502-Apple-1-Replica
An expandable SBC-version of the Apple 1 computer, easy to get started with and lot of cool stuff that can be added to it!
80 parts193GPL-3.0 - 2 layers226.9 × 108.5 mm
