2 layers61 × 64.1 mm
Rfreplacement
c0pperdragon/C64-Video-Enhancement
Component video modification for the C64 8-bit computer
98 parts286MIT
2 layers25 × 25 mm
Wifi adapter
qeda/examplesPCB examples with using QEDA
- Size
- 25 × 25 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 17
- Nets
- 13
- Pads
- 53
- Tracks, vias
- 164, 48
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 4
- Created
- 12 Jun 2016
- Updated
- 4 Sep 2016
Overview
Wifi adapter is an open-source printed circuit board by qeda, from the qeda/examples repository on GitHub, published under the MIT licence. It is a 2-layer board of 25 × 25 mm with 17 parts on 13 nets, routed with 164 tracks and 48 vias.
It is built around the ESP-07, LM1117IMPX-3.3 and DF13A-6P-1.25H. Its parts include 8 resistors, 3 capacitors, 2 ICs and 1 connector. It belongs with the radio and wireless and interfaces and adapters boards and the ESP8266 boards of this library.
Main components
3
ESP-07
SMD-16P,21.2x16mm-40℃~+125℃ -98dBm 19.5dBm 2.4GHz 3.3V 802.11b/g/n ESP8266 Chip On-board PCB Antenna Over-the-air (OTA) update UART、I2C、HSPI、I2S SMD-16P,21.2x16mm WiFi Modules ROHSAi-ThinkerWiFi Modules
LM1117IMPX-3.3
SOT-2230℃~+125℃@(Tj) 1 1.2V@(800mA) 15V 3.3V 5mA 75dB@(120Hz) 800mA Fixed Over Current Protection、Over Temperature Protection Positive SOT-223 Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSTexas InstrumentsVoltage Regulators - Linear, Low Drop Out (LDO) RegulatorsDF13A-6P-1.25H
UncategorisedHirose Electric
README
README.mdExamples
Here you will find PCB examples made using QEDA.
Wi-Fi Adapter
This is a simple adapter allowing to connect ESP-07 Wi-Fi module to Pixhawk autopilot.
- EDA: KiCad
- Source: ./wifi-adapter
Licence
All source files are licensed under MIT license.
Parts
17| Qty | Value | Footprint | References |
|---|---|---|---|
| 4 | DNP | wa:RESC1608X55M | R3, R5, R6, R7 |
| 2 | 10k | wa:RESC1608X55M | R4, R8 |
| 2 | 10u | wa:CAPC3225X230M | C1, C2 |
| 2 | 33 | wa:RESC1608X55M | R1, R2 |
| 1 | 0.1u | wa:CAPC1608X92M | C3 |
| 1 | DF13A-6P-1.25H | wa:HIROSE_DF13A-6P-1.25H | J1 |
| 1 | ESP-07 | wa:SON200P2120X1600X300-16M | U2 |
| 1 | GND | wa:TP-TH-1 | TP2 |
| 1 | GP0 | wa:TP-TH-1 | TP3 |
| 1 | LM1117IMPX-3.3 | wa:SOT230P700X180-4M | U1 |
| 1 | RST | wa:TP-TH-1 | TP1 |
Similar boards
- 2 layers58.4 × 34.3 mm
SIO2SD
c0pperdragon/SIO2SD
An Arduino-based floppy drive emulator for the atari 8 bit computers.
26 parts83 - 2 layers43.2 × 53.3 mm
A VideoBoard
c0pperdragon/A-VideoBoard
FPGA board to create a component video signal for vintage computers.
75 parts71MIT - 2 layers50.8 × 33 mm
ZX Spectrum Component Video
c0pperdragon/ZX-Spectrum-Component-Video
Component video (YPbPr) output for the ZX Spectrum computer
78 parts40 - 4 layers195 × 159 mm
- 4 layers35 × 55 mm
CARP
aweeri/Control-Avionics-RP2350
Control Avionics RP2350 [CARP] is a compact system designed specifically for operating small scale sounding rockets.
96 parts2 - 2 layers159.9 × 99.9 mm
- 2 layers120 × 100 mm
Root
GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.
127 parts28MIT
Questions
How big is the Wifi adapter PCB?
It measures 25 × 25 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Wifi adapter use?
17 parts, built around the ESP-07, LM1117IMPX-3.3 and DF13A-6P-1.25H. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Wifi adapter KiCad files?
From the qeda/examples repository on GitHub, at the commit this page was made from: the board is wifi-adapter/board/wifi-adapter.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Wifi adapter design in my own project?
Its repository publishes it under the MIT licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).