Skip to the content
4 layers83 × 83 mmSensor Board, the printed circuit board in 3D

Sensor Board

Pwnsat/PWNCUBE29

PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research

Size
83 × 83 mm
Copper layers
4
Thickness
1.6 mm
Parts
75
Nets
72
Pads
252
Tracks, vias
556, 58
Pours
5
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
30 Jul 2026
Updated
8 Aug 2026

Overview

Sensor Board is an open-source printed circuit board by Pwnsat, from the Pwnsat/PWNCUBE repository on GitHub. It is a 4-layer board of 83 × 83 mm with 75 parts on 72 nets, routed with 556 tracks and 58 vias.

It is built around the SX1262IMLTRT, BME280 and 0900FM15D0039E, with the ICM-42670-P among its other parts. Its parts include 24 capacitors, 8 ICs, 6 resistors, 6 inductors and 3 connectors. It belongs with the sensors and measurement boards of this library.

Main components

4

README

README.md

PWNCUBE - The Vulnerable Satellite Hacking Platform for Learning Through Research

A hardware-based CubeSat platform for aerospace cybersecurity research and training, developed by PWNSAT in partnership with ElectronicCats. PWNCUBE is a satellite design and vulnerability set onto real dual-core flight-computer hardware (Rockchip RV1106 — Cortex-A7 Linux + RISC-V RT-Thread), demonstrating that the same class of satellite command-and-control vulnerabilities reproduces across genuinely different hardware, not just one reference board.

Full documentation, architecture diagrams, and step-by-step guides live in the Wiki.

Repository layout

FolderContents
Firmware/The complete RV1106 SDK source: dual-core boot (Cortex-A7 Linux + RISC-V RT-Thread), CCSDS Space Packet Protocol stack, radio/sensor/GPS drivers, build scripts. Clone-and-build (see Getting Started).
Hardware/KiCad schematics and PCB design files for the three physical boards (main/flight-computer, sensor, battery).
Case/3D-printable enclosure (STL + slicer project files).

The 8 hardware-validated attack scripts (00–07, USB and real RF) live in a companion Attacks/ repository, published separately.

What PWNCUBE demonstrates

Same protocol (CCSDS Space Packet Protocol), same command APIDs, same vulnerability classes as FlatSat — reproduced on real dual-core flight hardware instead of a single-MCU reference board:

  • No authentication on any telecommand (thruster control, reset, firmware disclosure, mode changes)
  • No anti-replay protection — a captured command can be resent verbatim and re-executed
  • A ground-station "auth" handshake trivially forgeable with a static, hardcoded XOR key
  • A GPS subsystem (real u-blox NEO-6M receiver) that trusts any injected fix with zero plausibility or rate-of-change checking
  • Plaintext telemetry by default — no encryption on the downlink at all, unlike FlatSat's static-key AES-128
  • A memory-safety bug (integer underflow in message reassembly) that crashes the flight computer's real-time core with a single malformed packet, permanently killing the internal command channel until a physical power-cycle

See the Attack Vectors wiki page for the full walkthrough of all 8 attacks, with real hardware output for each.

Quick start

bash
git clone <this-repo-url> PWNCUBE-FIRMWARE
cd PWNCUBE-FIRMWARE/Firmware
# extract toolchain.tar.gz + rkbin.tar.gz from the v6 Release first — see below
./build.sh deps      # install host build dependencies (native Linux x86-64)
./build.sh            # produces output/images/update.img

On macOS, Windows, or if you'd rather not install packages on the host directly, build inside Docker instead — see Getting Started for the full walkthrough (both paths), including flashing, which always needs a real Linux x86-64 host or VM with USB passthrough regardless of how you built.

Note on repository size

This repository intentionally excludes two things present in the original SDK archive, both available as assets on the v6 Release:

  • toolchain/ (ARM + RISC-V cross-compilers, ~2.6GB) — third-party, freely redistributable, just too large for a source repo.
  • src/rkbin/ (Rockchip's proprietary boot-stage binaries) — third-party, provided by ElectronicCats.

Everything else — kernel, U-Boot, the RT-Thread MCU firmware, all PWNSAT-authored application code — is included as source.

Disclaimer

This project was created for educational purposes, to teach and learn aerospace cybersecurity. Neither PWNSAT nor Electronic Cats are responsible for how the knowledge, code, or tools hosted in this repository are used. Use only against hardware, firmware, or signal sources you own or are explicitly authorized to test.

License

Firmware source: see Firmware/README.md for the per-component breakdown (this SDK integrates code under several different open-source licenses). Attack scripts and this repository's own documentation: MIT unless noted otherwise.

Related projects

  • FlatSat — the original single-MCU (RP2040) satellite security training platform this project ports from.
  • PWNSAT-C3 — the shared ground-station dashboard used to operate both FlatSat and PWNCUBE (separate repository).

Parts

75
QtyValueFootprintReferences
9100nFCapacitor_SMD:C_0402_1005MetricC1, C2, C3, C4, C7, C9, C10, C13, C14
4100RResistor_SMD:R_0402_1005MetricR2, R3, R7, R8
41nFCapacitor_SMD:C_0402_1005MetricC12, C19, C20, C21
43.3pFCapacitor_SMD:C_0402_1005MetricC16, C18, C22, C31
4MountingHoleMountingHole:MountingHole_2.2mm_M2H1, H2, H3, H4
20900FM15D0039FlatSat:0900FM15D0039EU3, U9
2100pFCapacitor_SMD:C_0402_1005MetricC15, C17
215uHInductor_SMD:L_0603_1608MetricL3, L7
232MhzCrystal:Crystal_SMD_2520-4Pin_2.5x2.0mmY1, Y4
24.7KResistor_SMD:R_0402_1005Metric_Pad0.72x0.64mm_HandSolderR1, R5
2470nFCapacitor_SMD:C_0402_1005MetricC6, C43
247nHInductor_SMD:L_0603_1608MetricL2, L4
247pFCapacitor_SMD:C_0402_1005MetricC5, C11
29.1nHInductor_SMD:L_0603_1608MetricL1, L5
2AntennaFlatSat:SMA_EDGEJ1, J2
2G***kibuzzard-698518BFkibuzzard-698518BF, kibuzzard-698518BF
2G***kibuzzard-698669E3kibuzzard-698669E3, kibuzzard-698669E3
2G***kibuzzard-698669D4kibuzzard-698669D4, kibuzzard-698669D4
2G***kibuzzard-698518ECkibuzzard-698518EC, kibuzzard-698518EC
2JumperJumper:SolderJumper-3_P1.3mm_Bridged12_RoundedPad1.0x1.5mm_NumberLabelsJP1, JP2
2LOGOLOGOG***, G***
2LOGOAesthetics:electronic_cats_logo_8x6G***, G***
2PE42421Package_TO_SOT_SMD:SOT-363_SC-70-6U5, U10
2SX1262IMLTRTPackage_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.65x2.65mmU2, U12
12.2uFCapacitor_SMD:C_0402_1005MetricC8
1BME280Package_LGA:Bosch_LGA-8_2.5x2.5mm_P0.65mm_ClockwisePinNumberingU4
1G***kibuzzard-69860F65kibuzzard-69860F65
1G***kibuzzard-698668F8kibuzzard-698668F8
1G***kibuzzard-69866AECkibuzzard-69866AEC
1G***kibuzzard-69866B09kibuzzard-69866B09
1G***kibuzzard-69866904kibuzzard-69866904
1G***kibuzzard-6985197Ekibuzzard-6985197E
1G***kibuzzard-69860F52kibuzzard-69860F52
1ICM-42670-PPackage_LGA:LGA-14_3x2.5mm_P0.5mm_LayoutBorder3x4yU1
1SensorsConnector_PinHeader_2.54mm:PinHeader_2x20_P2.54mm_VerticalJ3

The 74 most common of 75 parts.

More from Pwnsat/PWNCUBE

2
  • 4 layers83 × 83 mmPWNSAT, the printed circuit board in 3D

    PWNSAT

    Pwnsat/PWNCUBE

    PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research

    139 parts29
  • 2 layers83 × 83 mmBattery Board, the printed circuit board in 3D

    Battery Board

    Pwnsat/PWNCUBE

    PWNCUBE v1.0 is a Cubesat hardware based platform for aerospace cybersecurity research

    38 parts29

Similar boards

  • 4 layers48 × 32 mmFlatSat, the printed circuit board in 3D

    FlatSat

    Pwnsat/FlatSat

    Flatsat v1.0 is a hardware based platform for aerospace cybersecurity research

    106 parts575GPL-2.0
  • 4 layers65 × 44 mmBt lora transciever, the printed circuit board in 3D

    Bt lora transciever

    dylandibeneditto/bt-lora-transciever

    2.4GHz and 915MHz telemetry board

    112 parts1
  • 4 layers40.2 × 53.9 mmLora, the printed circuit board in 3D

    Lora

    GodOfStrategy/Personal-LoRa-Puck

    A small compact module made to transmit and receive messages using sub gigahertzs frequencies of radio waves, for use in things such as automation, transmission, reception etc.

    46 parts
  • 2 layers35.5 × 29 mmLoraa, the printed circuit board in 3D

    Loraa

    joshitha-c/lora-pluck

    A custom-designed LoRa development board built in KiCad, combining the powerful Raspberry Pi RP2040 microcontroller with the Semtech SX1262 LoRa transceiver.

    48 parts
  • 4 layers67 × 31.3 mmFlipper subg, the printed circuit board in 3D

    Flipper subg

    ElectronicCats/flipper-addons

    Flipper addons by Electronic Cats

    47 parts133
  • 4 layers81 × 20 mmVersion current, the printed circuit board in 3D

    Version current

    oomlout/oomlout_oomp_project_src

    100 parts
  • 4 layers30.5 × 72.9 mmTopaz, the printed circuit board in 3D

    Topaz

    dfedor2008/Topaz

    A radio module which can send data through morse code

    60 parts

Questions

How big is the Sensor Board PCB?

It measures 83 × 83 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Sensor Board use?

75 parts, built around the SX1262IMLTRT, BME280, 0900FM15D0039E and ICM-42670-P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Sensor Board KiCad files?

From the Pwnsat/PWNCUBE repository on GitHub, at the commit this page was made from: the board is Hardware/Sensor_Board/Sensor_Board.kicad_pcb and its schematic Hardware/Battery_Board/Batt_Connector.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Sensor Board design in my own project?

Its repository states no licence, so its author keeps all rights: ask Pwnsat before reusing the design.