
Optiplower
jamwaffles/optiplower
Power a Dell Optiplex 3050 Micro from a 24V industrial power supply

PuppyBot's controller, Linux runtime, simulator, visual-control training and classic ESP32 serial firmware are implemented in Flexscript. The maintained source is in src/, organized by purpose.
Puppybot is an open-source printed circuit board by puppycorp, from the puppycorp/puppybot repository on GitHub. It is a 2-layer board of 64.5 × 94.5 mm with 20 parts on 34 nets, routed with 67 tracks and 0 vias.
It is built around the ESP32-C3-WROOM-02-H4, L298N and XL4015E1. Its parts include 10 capacitors, 3 ICs and 3 connectors. It belongs with the ESP32 and RISC-V boards of this library.
PuppyBot's controller, Linux runtime, simulator, visual-control training and
classic ESP32 serial firmware are implemented in Flexscript. The maintained
source is in src/, organized by purpose.
From the repository root:
flexscript run puppybot.flexOpen http://127.0.0.1:8081/ for the robot dashboard. The default is a fake
servo bus. The launcher compiles and executes the native runtime; configuration
comes from puppybot.json. See the
controller instructions for physical serial control and output enable.
Run a separate 3D simulator with flexscript run simulator.flex. It prints the
private serial device and the controller connection command. For the lightweight
servo model use flexscript run simulator.flex --servo-only.
For autonomous simulation and visual-control experiments:
flexscript run sim.flex --list-cases
flexscript run sim.flex --case house-blocks-into-box --drift 10
./src/control.sh buildSee simulation, visual control, Gym and exploration. Python remains in experiment orchestration, data preparation and independent verification; the repository is not exclusively Flexscript.
Install Flexscript and keep the sibling ../flexscript Git checkout available.
The native build snapshots a pinned compiler/library revision from that checkout
into build/native-toolchain; it never changes the sibling checkout. Set
FLEXSCRIPT_SOURCE to use another checkout containing that revision. To supply
an already verified matching toolchain instead, set FLEXSCRIPT_COMPILER and
FLEXSCRIPT_ROOT (and FLEXSCRIPT_SOURCE for firmware link tooling).
./src/scripts/build-runtime.sh
./src/scripts/test-runtime.shThese commands build and test the native controller, HTTP/WebSocket runtime, CLI, serial simulator and simulated firmware without the GPU training toolchain. The tests use loopback sockets and private PTYs, not a physical robot.
The broader ./src/scripts/build.sh and ./src/scripts/test.sh include Gym,
vision, controller differential tests and additional tooling. They require a
compatible Flexscript source checkout and GPU libraries; set FLEXSCRIPT_ROOT
and follow the detailed build instructions.
For classic ESP32 serial firmware:
python3 src/scripts/prepare-esp32-tools.py
./src/scripts/build-esp32.shSee firmware wiring, verification and flashing. The Flexscript target is serial-only: Wi-Fi/WebSocket/mDNS, Android wireless control, persistent calibration and physical hardware qualification are still separate work. Replacing the source layout does not establish those capabilities.
| Path | Purpose |
|---|---|
src/core/, src/transport/ | Shared controller, kinematics, safety and protocol |
src/runtime/, src/host/, src/cli/ | Linux service, dashboard, serial adapter and CLI |
src/firmware/, src/platform/ | ESP32 and simulated firmware adapters |
src/sim/, src/simulator/, src/gym/ | 3D simulation, serial plant and rollout UI |
src/control/, src/ml/, src/vision/, src/exploration/ | Learning, inference and navigation |
src/scripts/, src/tests/ | Build tools and verification |
tests/reference/rust-core/ | Original Rust controller used only as a test oracle |
datasets/, experiments/, diary/ | Dataset recipes, experiment programs and research notes |
build/flex/sim/ | Local generated datasets and experiment artifacts |
models/, robotdreams/ | Owned assets and retained historical scene/calibration evidence |
android/, python/, design/ | Android client, servo service utilities and electronics |
The Rust runtime, CLI, ESP32 firmware and collision tools are retired from the maintained source tree; earlier versions remain in Git history. The native build workflow packages Flexscript runtime binaries and the Flexscript ESP32 ROM image. The Android client remains a separate application.
flex is a compatibility symlink to src; puppybot/core points to the Rust
test reference. New development uses the canonical paths. Existing experiments,
receipts and build/flex output paths are not renamed by this migration.
Source changes still require fresh provenance checks before an old run can be
repeated; a compatibility path does not guarantee identical source hashes.
Actual data lives primarily under build/flex/sim/; datasets/ contains recipes
and documentation. Follow the storage rules:
budget every run, preserve required evidence, review retention when it finishes,
and verify physical space recovered after cleanup. Git-ignored data is not
necessarily disposable.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 5 | C | Capacitor_SMD:C_0805_2012Metric | C1, C4, C6, C7, C10 |
| 5 | C_Polarized | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C2, C3, C5, C8, C9 |
| 4 | Motor_DC | TerminalBlock_RND:TerminalBlock_RND_205-00234_1x04_P5.08mm_Horizontal | M1, M2, M5, M6 |
| 3 | XL4015 | Connector:FanPinHeader_1x04_P2.54mm_Vertical | J1, J2, J3 |
| 2 | L298N | Package_DIP:DIP-16_W7.62mm | U1, U4 |
| 1 | ESP32-C3-WROOM-02 | RF_Module:ESP32-C3-WROOM-02 | U2 |

jamwaffles/optiplower
Power a Dell Optiplex 3050 Micro from a 24V industrial power supply

GonzaCerv/noah-hardware
This repo contains all the hardware description for the Noah project. Here lies 3D models, electronics PCB and Firmware software of the robot.

SRA-VJTI/Evo-Borne
This repository focuses on building an open-source morphobot.

wenzel-lab/syringe-pumps-and-controller
Design of 3d printable syringe pumps and dual controller.



Digital-Naturalism-Laboratories/Mothbox_Electronics
This is where the electronics for the Mothbox are developed, such as the PCB! It's copied over from https://github.com/Digital-Naturalism-Laboratories/Mothbox/tree/main/Hardware/PCB so you can check that out if you want…

kwiecinski/MultiChem-Battery-Tester
Multi-chemistry (Lithum, PB and others) battery charger/discharger with capacitance measurement and discharge graph for diffrent charge/load currents.
It measures 64.5 × 94.5 mm and has 2 copper layers, 1.6 mm thick.
20 parts, built around the ESP32-C3-WROOM-02-H4, L298N and XL4015E1. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the puppycorp/puppybot repository on GitHub, at the commit this page was made from: the board is design/puppybot.kicad_pcb and its schematic design/puppybot.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask puppycorp before reusing the design.