Skip to the content
2 layers154 × 152.8 mmElevenFingers, the printed circuit board in 3D

An ergonomic split keyboard

Size
154 × 152.8 mm
Copper layers
2
Thickness
1.6 mm
Parts
102
Nets
87
Pads
626
Tracks, vias
1,497, 120
Routed
Yes
KiCad
KiCad 6 (file 20211014)
Created
17 Jun 2022
Updated
17 Aug 2022

Overview

ElevenFingers is an open-source printed circuit board by pschauppner, from the pschauppner/ElevenFingers repository on GitHub. It is a 2-layer board of 154 × 152.8 mm with 102 parts on 87 nets, routed with 1,497 tracks and 120 vias.

It is built around the 1N4148W and SK6812MINI-E. Its parts include 30 diodes, 30 switches, 30 inductors, 2 ICs and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.

Main components

2

README

README.md

ElevenFingers

An ergonomic split keyboard

Notes/assumptions for this build

Encoder will be swapped in software (vice having a reverse footprint) Most components are flipped for right side, LEDs are flipped AND rotated 180 degrees so that routes with vias can be more direct

Issues and planned work

  • Bluetooth is tempermental with pull down resistors - no longer needed for my current setup - plan to remove
  • Source code has to get modified for flashing left half and right half - not great
  • some software layout issues (no semi colon, tilde, grave, function keys...) - could really expand on use of layers
  • OLED can be more helpful
  • I don't like the sound of clicky keys - plan to switch to tactile
  • hotswap sockets were a bad idea - they made connections less reliable (and I'm not a big keyswapper anyway)
  • Next: case + PCB, better wires
  • a power switch, and/or a reset button might be nice

Project Navigation

keyboard-layout-editor

This folder contains the json for uploading in the 'Raw Data' tab of keyboard-layout-editor.com It's rotated right because it was easier for dealing with a columnar stagger this way (keyboard-layout-editor syntax is row-based, assuming each "row" is at the same vertical offset).

qmk_firmware/keyboards/ElevenFingers

Contains the source code that would go under 'keyboards' in the qmk_firmware root directory (https://github.com/qmk/qmk_firmware)

Note - my idea is that any customizations to qmk will be added here with a script to copy it into the qmk repository. (Why does QMK host so many individual keyboard source files?)

fabrication

This keyboard is currently a cardboard prototype. The svg was used as a template to cutout squares in a piece of cardboard. In the future this will contain drawings for case and mounting plates. Note I used http://builder.swillkb.com/ with the MX switch type (and otherwise default settings) to generate this SVG.

circuitry

This keyboard was handwired. This folder contains notes and pictures of the wiring. In the future, this will contain PCB design files.

Parts

102
QtyValueFootprintReferences
301N4148WElevenFingers:D_SOD-123D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14
30MXElevenFingers:SW_Cherry_MX_1.00u_PCBSW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +14
30SK6812MINIElevenFingers:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mmL1, L2, L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L20, L21, L22, L23 +14
5, , , ,
1OLEDElevenFingers:OLED_4PinJ1
1ProMicroElevenFingers:ProMicroU1
1RotaryEncoder_SwitchElevenFingers:RotaryEncoder_EC11E1
1SW_Push_DualElevenFingers:Arduino_PushbuttonB1
1TRRSElevenFingers:TRRS-PJ-320AU2

The 100 most common of 102 parts.

Similar boards

  • 2 layers99.1 × 90.7 mmBgkeeb, the printed circuit board in 3D

    Bgkeeb

    sadekbaroudi/bgkeeb

    This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

    108 parts108
  • 2 layers291.8 × 134.6 mmMegaXE keyboard, the printed circuit board in 3D

    MegaXE keyboard

    bleroy/3d-junkyard

    Random 3D models

    359 parts69
  • 2 layers243.9 × 136.5 mmBarobord, the printed circuit board in 3D

    Barobord

    sadekbaroudi/barobord

    I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

    157 parts57
  • 2 layers227.3 × 84.9 mmStm32 hotswap chiffre, the printed circuit board in 3D

    Stm32 hotswap chiffre

    sporkus/le_chiffre_keyboard_stm32

    Le Chiffre keyboard pcb with stm32F072

    110 parts53CERN-OHL-W-2.0
  • 2 layers43.5 × 33.9 mmAdapter, the printed circuit board in 3D

    Adapter

    Bastardkb/Charybdis-EC11

    EC11 PCB to be used in place of the trackball in the Charybdis keyboard.

    26 parts24
  • 2 layers142.6 × 120 mmUrsula, the printed circuit board in 3D

    Ursula

    jimmerricks/ursula

    124 parts21
  • 2 layers100 × 95.3 mmDaNumPad Glow 20, the printed circuit board in 3D

    DaNumPad Glow 20

    TweetyDaBird/DaNumPad

    A Numpad

    117 parts19
  • 2 layers289.7 × 109.1 mmWlfkbd, the printed circuit board in 3D

    Wlfkbd

    WillACosta/wlfkbd

    The WLF is a 40-key split keyboard (20 keys per half) with a column-staggered matrix and a splayed thumb cluster.

    214 parts19MIT

Questions

How big is the ElevenFingers PCB?

It measures 154 × 152.8 mm and has 2 copper layers, 1.6 mm thick.

What parts does the ElevenFingers use?

102 parts, built around the 1N4148W and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the ElevenFingers KiCad files?

From the pschauppner/ElevenFingers repository on GitHub, at the commit this page was made from: the board is circuitry/ElevenFingers.kicad_pcb and its schematic circuitry/ElevenFingers.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the ElevenFingers design in my own project?

Its repository states no licence, so its author keeps all rights: ask pschauppner before reusing the design.