
Bgkeeb
sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…

An ergonomic split keyboard
ElevenFingers is an open-source printed circuit board by pschauppner, from the pschauppner/ElevenFingers repository on GitHub. It is a 2-layer board of 154 × 152.8 mm with 102 parts on 87 nets, routed with 1,497 tracks and 120 vias.
It is built around the 1N4148W and SK6812MINI-E. Its parts include 30 diodes, 30 switches, 30 inductors, 2 ICs and 1 connector. It belongs with the keyboards and input boards and the AVR (ATmega, ATtiny) boards of this library.
An ergonomic split keyboard
Encoder will be swapped in software (vice having a reverse footprint) Most components are flipped for right side, LEDs are flipped AND rotated 180 degrees so that routes with vias can be more direct
This folder contains the json for uploading in the 'Raw Data' tab of keyboard-layout-editor.com It's rotated right because it was easier for dealing with a columnar stagger this way (keyboard-layout-editor syntax is row-based, assuming each "row" is at the same vertical offset).
Contains the source code that would go under 'keyboards' in the qmk_firmware root directory (https://github.com/qmk/qmk_firmware)
Note - my idea is that any customizations to qmk will be added here with a script to copy it into the qmk repository. (Why does QMK host so many individual keyboard source files?)
This keyboard is currently a cardboard prototype. The svg was used as a template to cutout squares in a piece of cardboard. In the future this will contain drawings for case and mounting plates. Note I used http://builder.swillkb.com/ with the MX switch type (and otherwise default settings) to generate this SVG.
This keyboard was handwired. This folder contains notes and pictures of the wiring. In the future, this will contain PCB design files.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 30 | 1N4148W | ElevenFingers:D_SOD-123 | D1, D2, D10, D11, D12, D13, D14, D15, D16, D17, D18, D19, D20, D21, D22, D23 +14 |
| 30 | MX | ElevenFingers:SW_Cherry_MX_1.00u_PCB | SW1, SW2, SW10, SW11, SW12, SW13, SW14, SW15, SW16, SW17, SW18, SW19, SW20, SW21, SW22, SW23 +14 |
| 30 | SK6812MINI | ElevenFingers:LED_SK6812MINI_PLCC4_3.5x3.5mm_P1.75mm | L1, L2, L10, L11, L12, L13, L14, L15, L16, L17, L18, L19, L20, L21, L22, L23 +14 |
| 5 | , , , , | ||
| 1 | OLED | ElevenFingers:OLED_4Pin | J1 |
| 1 | ProMicro | ElevenFingers:ProMicro | U1 |
| 1 | RotaryEncoder_Switch | ElevenFingers:RotaryEncoder_EC11 | E1 |
| 1 | SW_Push_Dual | ElevenFingers:Arduino_Pushbutton | B1 |
| 1 | TRRS | ElevenFingers:TRRS-PJ-320A | U2 |
The 100 most common of 102 parts.

sadekbaroudi/bgkeeb
This is a reversible 100mm x 100mm pcb with support for mx or choc switches (no hotswap), per key led, rotary encoders, and exposes the SDA/SCL/GND/VCC lines in the form of the pimoroni trackball pins (meaning you can…


sadekbaroudi/barobord
I have spent a lot of time and money designing prototypes, testing, developing, etc. Any contributions would be greatly appreciated!

sporkus/le_chiffre_keyboard_stm32
Le Chiffre keyboard pcb with stm32F072

Bastardkb/Charybdis-EC11
EC11 PCB to be used in place of the trackball in the Charybdis keyboard.



WillACosta/wlfkbd
The WLF is a 40-key split keyboard (20 keys per half) with a column-staggered matrix and a splayed thumb cluster.
It measures 154 × 152.8 mm and has 2 copper layers, 1.6 mm thick.
102 parts, built around the 1N4148W and SK6812MINI-E. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the pschauppner/ElevenFingers repository on GitHub, at the commit this page was made from: the board is circuitry/ElevenFingers.kicad_pcb and its schematic circuitry/ElevenFingers.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask pschauppner before reusing the design.