

KicadJE Counts PCB
Adjustment: - Distortion/gain section 1 (ch 1+2) feedback dist - Distortion/gain section 2 (ch 1+2) output stage dist + pos LED to GND
- Size
- 100 × 100 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 176
- Nets
- 97
- Pads
- 448
- Tracks, vias
- 916, 108
- Pours
- 6
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 30 Apr 2020
- Updated
- 18 Apr 2021
Overview
KicadJE Counts PCB is an open-source printed circuit board by promesoft, from the promesoft/KicadJE_Counts repository on GitHub. It is a 2-layer board of 100 × 100 mm with 176 parts on 97 nets, routed with 916 tracks and 108 vias.
It is built around the TL072 and LL4148. Its parts include 69 resistors, 40 diodes, 22 capacitors, 22 connectors and 4 ICs.
Main components
2README
README.mdKicadJE_Counts
Counter module as a successor to EU-3
Purpose
Count
10 step counter
Input +/- 10V DC
- Clock
- Hold
- Reset
Output +/- 10V DC x 10
- Steps
- Clock
Adjustment
- Frequency
- Hold
Dist Two
Input +/- 10V DC
- signal
Output +/- 10V DC
- signal
Adjustment:
- Distortion/gain section 1 (ch 1+2) feedback dist
- Distortion/gain section 2 (ch 1+2) output stage dist + pos LED to GND
Status - in the mail
Initial
| Stage | Detail | Status |
|---|---|---|
| create material | sch | ok |
| pcb | ok | |
| gerber | ok | |
| production | ok | |
| produced | ok | |
| delivered | in the mail |
Preliminary validation
| Test | Detail | Status |
|---|---|---|
| Initial Inspection | OK | |
| Initial Technical Test | Counts | |
| Initial Technical Test | Dist Two | OK - all pots are reversed - LED should be moved to the free spot between input and outputs |
| Initial Product Test | Counts | |
| Initial Product Test | Dist Two | Distorts - one channel more than the other - one input splits in two - default component values gives a lot or a little distortion |
Secondary validation
| Test | Detail | Status |
|---|---|---|
| Product Test | Counts | |
| Product Test | Dist Two | |
| Quality | Counts | |
| Quality | Dist Two | |
| Long Term Product Test | ||
| Power Draw |
Errata
Errata - Dist Two
- all pots are reversed
- default component values gives a lot or a little distortion
Issues and Notes
Pictures

Schematic
Counts

Dist Two

Analysis
Counts

Prototype
Parts
176| Qty | Value | Footprint | References |
|---|---|---|---|
| 27 | 10k | AJ:R_0805_AJ | R203, R204, R206, R207, R218, R219, R220, R221, R222, R223, R224, R225, R226, R227, R228, R229 +11 |
| 19 | 1k | AJ:R_0805_AJ | R208, R209, R210, R211, R212, R213, R214, R215, R216, R217, R313, R316, R317, R318, R327, R328 +3 |
| 8 | LL4148 | AJ:D_MiniMELF | D307, D308, D309, D310, D313, D314, D315, D316 |
| 7 | 1N1007 | AJ:D_SOD-123 | D201, D301, D302, D303, D304, D305, D306 |
| 6 | 100n | AJ:C_0805_AJ | C204, C205, C309, C310, C311, C312 |
| 6 | 1u | AJ:C_0805_AJ | C313, C314, C316, C317, C318, C319 |
| 5 | 100k | AJ:R_0805_AJ | R218, R306, R312, R320, R325 |
| 5 | 10n | AJ:C_0805_AJ | C201, C315, C320, C321, C322 |
| 4 | 1N5819 | AJ:D_SOD-123 | D202, D203, D204, D205 |
| 3 | DNP | AJ:R_0805_AJ | R107, R108, R109 |
| 3 | LOGO | AJ:Johansen_engineering_logo_20mm | G***, G***, G*** |
| 3 | OPEN | AJ:R_0805_AJ | R302, R304, R305 |
| 2 | 0R | AJ:R_0805_AJ | R311, R324 |
| 2 | 100uF 16v | Capacitor_SMD:C_1206_3216Metric | C305, C306 |
| 2 | 2,2mm | MountingHole:MountingHole_2.2mm_M2_Pad_Via | H302, H304 |
| 2 | 220R | AJ:R_0805_AJ | R315, R333 |
| 2 | D_LED | AJ:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D101, D102 |
| 2 | LED | LED_THT:LED_D3.0mm | D311, D312 |
| 2 | Open | AJ:R_0805_AJ | R308, R321 |
| 2 | TL072 | AJ-Dropbox-Kicad:AJ_SO-8_5.3x6.2mm_P1.27mm | U301, U302 |
| 1 | 100k_1.1 | Potentiometer_THT:Potentiometer_China_RK09_Single_Vertical_AJ | RV301 |
| 1 | 100k_1.2 | Potentiometer_THT:Potentiometer_China_RK09_Single_Vertical_AJ | RV302 |
| 1 | 100k_2.1 | Potentiometer_THT:Potentiometer_China_RK09_Single_Vertical_AJ | RV303 |
| 1 | 100k_2.2 | Potentiometer_THT:Potentiometer_China_RK09_Single_Vertical_AJ | RV304 |
| 1 | 10R | AJ:R_0805_AJ | R331 |
| 1 | 10u | AJ:C_0805_AJ | C202 |
| 1 | 10uF 16v | Capacitor_SMD:C_1206_3216Metric | C203 |
| 1 | 1N4007 | AJ:D_SOD-123 | D220 |
| 1 | 1N4148 | AJ:D_SOD-123 | D221 |
| 1 | 220k | AJ:R_0805_AJ | R202 |
| 1 | 2k2 | AJ:R_0805_AJ | R307 |
| 1 | 33k | AJ:R_0805_AJ | R319 |
| 1 | 3k3 | AJ:R_0805_AJ | R201 |
| 1 | 4017 | Package_SO:SOIC-16_4.55x10.3mm_P1.27mm | U202 |
| 1 | 47k | AJ:R_0805_AJ | R205 |
| 1 | 47n | AJ:C_0805_AJ | C206 |
| 1 | 50k_freq | Potentiometer_THT:Potentiometer_China_RK09_Single_Vertical_AJ | RV201 |
| 1 | ClockIn | AJ-Dropbox-Kicad:PJ301SM | J202 |
| 1 | ClockOut | AJ-Dropbox-Kicad:PJ301SM | J201 |
| 1 | Conn_02x03_Male | Connector_PinHeader_2.54mm:PinHeader_2x03_P2.54mm_Vertical_SMD | J108 |
| 1 | Doepfer connector | Connector_PinSocket_2.54mm:PinSocket_2x08_P2.54mm_Vertical | J301 |
| 1 | HEADER_2x5_Doepfer | Connector_PinHeader_2.54mm:PinHeader_2x05_P2.54mm_Vertical | P201 |
| 1 | Hold | AJ-Dropbox-Kicad:PJ301SM | J214 |
| 1 | In 2 | AJ-Dropbox-Kicad:PJ301SM | J303 |
| 1 | In1 | AJ:Jack_6m3 | TP301 |
| 1 | In_1 | AJ-Dropbox-Kicad:PJ301SM | J302 |
| 1 | LED | AJ:LED_0805_2012Metric_Pad1.15x1.40mm_HandSolder | D317 |
| 1 | LED_0 | LED_THT:LED_D3.0mm | D208 |
| 1 | LED_1 | LED_THT:LED_D3.0mm | D209 |
| 1 | LED_2 | LED_THT:LED_D3.0mm | D210 |
| 1 | LED_3 | LED_THT:LED_D3.0mm | D211 |
| 1 | LED_4 | LED_THT:LED_D3.0mm | D212 |
| 1 | LED_5 | LED_THT:LED_D3.0mm | D213 |
| 1 | LED_6 | LED_THT:LED_D3.0mm | D214 |
| 1 | LED_7 | LED_THT:LED_D3.0mm | D215 |
| 1 | LED_8 | LED_THT:LED_D3.0mm | D216 |
| 1 | LED_9 | LED_THT:LED_D3.0mm | D217 |
| 1 | LED_Clk_In | LED_THT:LED_D3.0mm | D207 |
| 1 | LED_Clk_Out | LED_THT:LED_D3.0mm | D206 |
| 1 | LED_HLD | LED_THT:LED_D3.0mm | D219 |
| 1 | LED_RST | LED_THT:LED_D3.0mm | D218 |
| 1 | LM555 | AJ-Dropbox-Kicad:AJ_SO-8_5.3x6.2mm_P1.27mm | U201 |
| 1 | ON | AJ:LED_Hole_3mm | H301 |
| 1 | Out 1 | AJ-Dropbox-Kicad:PJ301SM | J304 |
| 1 | Out 1 Final | AJ-Dropbox-Kicad:PJ301SM | J306 |
| 1 | Out 2 | AJ-Dropbox-Kicad:PJ301SM | J305 |
| 1 | Out 2 Final | AJ-Dropbox-Kicad:PJ301SM | J307 |
| 1 | Out0 | AJ-Dropbox-Kicad:PJ301SM | J203 |
| 1 | Out1 | AJ-Dropbox-Kicad:PJ301SM | J204 |
| 1 | Out2 | AJ-Dropbox-Kicad:PJ301SM | J205 |
| 1 | Out3 | AJ-Dropbox-Kicad:PJ301SM | J206 |
| 1 | Out4 | AJ-Dropbox-Kicad:PJ301SM | J207 |
| 1 | Out5 | AJ-Dropbox-Kicad:PJ301SM | J208 |
| 1 | Out6 | AJ-Dropbox-Kicad:PJ301SM | J209 |
| 1 | Out7 | AJ-Dropbox-Kicad:PJ301SM | J210 |
| 1 | Out8 | AJ-Dropbox-Kicad:PJ301SM | J211 |
| 1 | Out9 | AJ-Dropbox-Kicad:PJ301SM | J212 |
| 1 | PWM1 | AJ:Pot_6m3_scale1 | TP304 |
| 1 | PWM2 | AJ:Pot_6m3_scale1 | TP305 |
| 1 | Polyfuse | Fuse:Fuse_1206_3216Metric_Pad1.42x1.75mm_HandSolder | F201 |
The 172 most common of 176 parts.
Similar boards
- 2 layers

- 2 layers83.8 × 78.7 mm

- 2 layers228.6 × 100 mm

Mongus48
ChrisChrisLoLo/beyblock20
The magnetic, modular, 20-key macropad that can join together to form an ortholinear board
124 parts335GPL-3.0 - 2 layers80 × 129.1 mm

Smart Plant
JGAguado/Smart_Plant
The Smart Plant is a board that can be plugged directly on the soil, close to the plant, that allows the measurement of the environment (soil moisture, environment temperature & illuminance), and presents the…
75 parts303 - 4 layers137 × 86 mm

- 4 layers38.4 × 128.5 mm

- 2 layers275 × 200 mm

- 2 layers149.9 × 55.9 mm

Questions
How big is the KicadJE Counts PCB PCB?
It measures 100 × 100 mm and has 2 copper layers, 1.6 mm thick.
What parts does the KicadJE Counts PCB use?
176 parts, built around the TL072 and LL4148. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the KicadJE Counts PCB KiCad files?
From the promesoft/KicadJE_Counts repository on GitHub, at the commit this page was made from: the board is KicadJE_Counts_PCB.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the KicadJE Counts PCB design in my own project?
Its repository states no licence, so its author keeps all rights: ask promesoft before reusing the design.