2 layers39.5 × 38.9 mm
2 layers97.3 × 148 mm
Board V0
project-neon/Neon_SSL_Robot- Size
- 97.3 × 148 mm
- Copper layers
- 2
- Thickness
- 1.6 mm
- Parts
- 90
- Nets
- 172
- Pads
- 418
- Tracks, vias
- 687, 291
- Pours
- 1
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 26 Mar 2023
- Updated
- 4 Oct 2026
Overview
Board V0 is an open-source printed circuit board by project-neon, from the project-neon/Neon_SSL_Robot repository on GitHub. It is a 2-layer board of 97.3 × 148 mm with 90 parts on 172 nets, routed with 687 tracks and 291 vias.
It is built around the L7805 and WS2812B. Its parts include 20 resistors, 16 connectors, 10 capacitors, 9 ICs and 8 diodes. It belongs with the ESP32 boards of this library.
Main components
2
L7805
TO-220ST0℃~+125℃@(Tj) 1 1.2A 20V 2V@(1A) 42uV 500uA 5V 73dB@(120Hz) Fixed Positive Short Circuit Protection TO-220ST Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSOSENVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
WS2812B
5mm X 5mm Surface Mount RGB LED with Intelligent ControlWorldsemiUncategorised
README
README.mdNeon_SSL_Robot
Parts
90| Qty | Value | Footprint | References |
|---|---|---|---|
| 20 | R_Small | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1, R2, R3, R4, R201, R202, R203, R204, R205, R206, R207, R208, R209, R210, R401, R402 +4 |
| 8 | MountingHole | MountingHole:MountingHole_3.2mm_M3 | H101, H102, H103, H104, H105, H106, H107, H108 |
| 8 | SolderJumper_2_Open | Jumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mm | JP1, JP2, JP3, JP4, JP5, JP6, JP7, JP8 |
| 5 | C_Small | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C2, C3, C4, C6, C7 |
| 5 | LED | LED_SMD:LED_0805_2012Metric | D1, D2, D3, D4, D5 |
| 5 | TestPoint | TestPoint:TestPoint_Pad_D1.5mm | TP1, TP2, TP3, TP4, TP5 |
| 4 | Conn_02x04_Counter_Clockwise | Connector_PinSocket_2.54mm:PinSocket_2x04_P2.54mm_Vertical | J6, J7, J8, J9 |
| 4 | DRV8313_module | driver_module:drv8313 | U3, U4, U5, U6 |
| 4 | SolderJumper_3_Open | Jumper:SolderJumper-3_P1.3mm_Open_RoundedPad1.0x1.5mm | JP9, JP10, JP11, JP12 |
| 3 | 0.1 uF | Capacitor_SMD:C_0805_2012Metric | C201, C202, C401 |
| 3 | WS2812B | LED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mm | D201, D202, D401 |
| 2 | LOGO | LOGO | G***, G*** |
| 2 | YAAJ_BluePill_Part_Like_SWD_Breakout | smt32_dev_kits:YAAJ_BluePill_SWD_1 | U1, U2 |
| 1 | Brushless_connector | Connector_PinSocket_2.54mm:PinSocket_1x03_P2.54mm_Vertical | J11 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D22.0mm_P10.00mm_SnapIn | C5 |
| 1 | C_Polarized | Capacitor_THT:CP_Radial_D12.5mm_P5.00mm | C1 |
| 1 | ESP32-DEVKIT-V1 | esp32_dev_kit:esp32_dev_kit | U9 |
| 1 | L7805 | Package_TO_SOT_THT:TO-220-3_Horizontal_TabDown | U8 |
| 1 | MPU_connector | mpu6050:modulo_mpu6050 | J5 |
| 1 | Ther2_conn | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J4 |
| 1 | Ther3_conn | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J14 |
| 1 | Ther4_conn | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J16 |
| 1 | Ther_conn | Connector_PinHeader_2.54mm:PinHeader_1x02_P2.54mm_Vertical | J2 |
| 1 | kicker_connector | Connector_PinSocket_2.54mm:PinSocket_1x05_P2.54mm_Vertical | J10 |
| 1 | motor1_out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J1 |
| 1 | motor2_out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J3 |
| 1 | motor3_out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J13 |
| 1 | motor4_out | Connector_PinHeader_2.54mm:PinHeader_1x03_P2.54mm_Vertical | J15 |
| 1 | xt60 | Connector_AMASS:AMASS_XT60-M_1x02_P7.20mm_Vertical | J12 |
| 1 | ~ | step_down_module:module_LM2596 | U7 |
More from project-neon/Neon_SSL_Robot
4- 2 layers35 × 25 mm
- 2 layers37.8 × 20 mm
- 2 layers22 × 22 mm
Similar boards
- 2 layers136.5 × 185 mm
Faduino-1
silveirago/Faduino
The Faduino is a DIY MIDI controller inspired in the Presonus Faderport. It has one motorized fader, a rotary encoder and several silicone buttons, plus two PCBs.
101 parts45 - 2 layers136.5 × 185 mm
- 2 layers90 × 119 mm
Skid Steer 4x4 ESP32 DRV8833 PCB
retrobuiltRyan/4x4_Rover_ESP32
1:10 scale robot Rover with ESP32 and PS4 controller. Custom PCB for multi channel motor control
111 parts2BSD-3-Clause - 2 layers145.1 × 71.3 mm
HexaProyecto
EsqueletoArg/HexaProyecto
Un ajedrez de 3x3 casillas, donde se enfrentan 3 peones de ambos bandos para inmovilizar al rival o llegar al otro lado del tablero.
50 parts1 - 2 layers80 × 47.9 mm
ESP32 XIAO IoT PCB
retrobuiltRyan/esp32c3_xiao_iot_pcb
PCB for MQTT projects. Sensor, i2c, Screen, and buck converter breakout
60 parts1BSD-3-Clause - 4 layers50 × 50 mm
Dryer control
souptik-samanta/dryer
A custom PCB and self-centering spool holder for drying 3D printer filament. The PCB controls the fans, monitors temperature, and provides connections for PTC heaters.
33 parts1 - 2 layers41 × 38 mm
- 2 layers100 × 70 mm
Questions
How big is the Board V0 PCB?
It measures 97.3 × 148 mm and has 2 copper layers, 1.6 mm thick.
What parts does the Board V0 use?
90 parts, built around the L7805 and WS2812B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Board V0 KiCad files?
From the project-neon/Neon_SSL_Robot repository on GitHub, at the commit this page was made from: the board is Eletronics/Board_V0/Board_V0/Board_V0.kicad_pcb and its schematic Eletronics/Board_V0/Board_V0/Board_V0.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Can I use the Board V0 design in my own project?
Its repository states no licence, so its author keeps all rights: ask project-neon before reusing the design.