Skip to the content
2 layers41 × 38 mmSTM32, the printed circuit board in 3D

Sumo robot PCB based on STM32 and source code.

Size
41 × 38 mm
Copper layers
2
Thickness
1.6 mm
Parts
45
Nets
71
Pads
203
Tracks, vias
487, 69
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
30 Dec 2020
Updated
15 Jan 2022

Overview

STM32 is an open-source printed circuit board by drdurczok, from the drdurczok/STM32_Sumo repository on GitHub. It is a 2-layer board of 41 × 38 mm with 45 parts on 71 nets, routed with 487 tracks and 69 vias.

It is built around the L7805, WS2812B and BSS138. Its parts include 18 capacitors, 11 diodes, 7 resistors, 3 ICs and 2 connectors. It belongs with the STM32 boards of this library.

Main components

3

README

README.md

STM32_Sumo

Sumo robot PCB based on STM32 and source code.

Parts

45
QtyValueFootprintReferences
8WS2812BLED_SMD:LED_WS2812B_PLCC4_5.0x5.0mm_P3.2mmD3, D4, D5, D6, D7, D8, D9, D10
6100nFCapacitor_SMD:C_0805_2012MetricC7, C8, C10, C12, C14, C19
5100nFResistor_SMD:R_0805_2012MetricC1, C2, C13, C16, C18
210KResistor_SMD:R_0805_2012MetricR3, R4
220pFCapacitor_SMD:C_0805_2012MetricC9, C11
24.7uFCapacitor_SMD:C_0805_2012MetricC5, C6
2Power_OnLED_SMD:LED_1206_3216MetricD2, D11
2RLedResistor_SMD:R_0805_2012MetricR5, R9
10RResistor_SMD:R_0805_2012MetricR6
1100KResistor_SMD:R_0805_2012MetricR11
1100kResistor_SMD:R_0805_2012MetricR2
110uFCapacitor_Tantalum_SMD:CP_EIA-3216-18_Kemet-AC4
116MHzCrystal:Crystal_SMD_5032-2Pin_5.0x3.2mm_HandSolderingY1
11uFCapacitor_SMD:C_0805_2012MetricC17
12.2uFCapacitor_SMD:C_0805_2012MetricC15
1BSS138Package_TO_SOT_SMD:SOT-23Q1
1FuseFuse:Fuse_0805_2012MetricF2
1L7805Package_TO_SOT_SMD:TO-252-2U1
1MCP1703A-3302_SOT23Package_TO_SOT_SMD:SOT-23U4
1STM32F411RETxPackage_QFP:LQFP-64_10x10mm_P0.5mmU3
1SW_PushButton_Switch_SMD:SW_SPST_CK_RS282G05A3SW1
1SchottkyDiode_SMD:D_SOD-128D1
1St-LinkConnector_PinHeader_2.54mm:PinHeader_1x04_P2.54mm_VerticalJ18
1St-LinkConnector_PinHeader_1.27mm:PinHeader_2x14_P1.27mm_Vertical_SMDJ2

More from drdurczok/STM32_Sumo

1
  • 2 layers60 × 46 mmExtender Sumo, the printed circuit board in 3D

    Extender Sumo

    drdurczok/STM32_Sumo

    Sumo robot PCB based on STM32 and source code.

    35 parts

Similar boards

  • 2 layers35 × 99.5 mmPovslinger, the printed circuit board in 3D

    Povslinger

    Jeija/esp8266-povslinger

    Persistence of vision display using ESP8266 and APA102-2020

    49 parts10
  • 2 layers34.8 × 51.6 mmTankmon pcb, the printed circuit board in 3D

    Tankmon pcb

    frebbles/tankmon

    Tank monitoring full system design

    23 parts2Apache-2.0
  • 2 layers45 × 45 mmAVR FLIGHT CONTROLLER, the printed circuit board in 3D

    AVR FLIGHT CONTROLLER

    syeedameen/miniflight

    Budget Flight Controller for Drones with ATmega328P Microcontroller

    65 parts2GPL-3.0
  • 4 layers100 × 50 mmPcm5102a mux board, the printed circuit board in 3D

    Pcm5102a mux board

    cbaurtx/RetroBox

    RetroBox is an internet radio using an ESP32-S3 system on a chip

    86 parts
  • 2 layers31.5 × 50.5 mmAkashi ir arena, the printed circuit board in 3D

    Akashi ir arena

    sizu-07/akashi-ir-arena

    明石光線

    52 parts
  • 2 layers80 × 100 mmPlantomation, the printed circuit board in 3D

    Plantomation

    Synthron/Plantomation

    DIY plant watering system

    96 parts10
  • 2 layers47.6 × 53.5 mmPneu pwr brd, the printed circuit board in 3D

    Pneu pwr brd

    lbrosnan1/quboElectrical

    Stores the KiCAD PCB files for Qubo

    38 parts2

Questions

How big is the STM32 PCB?

It measures 41 × 38 mm and has 2 copper layers, 1.6 mm thick.

What parts does the STM32 use?

45 parts, built around the L7805, WS2812B and BSS138. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the STM32 KiCad files?

From the drdurczok/STM32_Sumo repository on GitHub, at the commit this page was made from: the board is PCB/STM32/STM32.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the STM32 design in my own project?

Its repository states no licence, so its author keeps all rights: ask drdurczok before reusing the design.