Skip to the content
2 layersSmart pillow, the printed circuit board in 3D
Copper layers
2
Thickness
1.6 mm
Parts
6
Nets
58
Pads
90
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 9.0 (file 20241229)
Created
21 Apr 2026
Updated
17 May 2026

Overview

Smart pillow is an open-source printed circuit board by Proiect-Krontech, from the Proiect-Krontech/ProiectKrontech repository on GitHub. It is a 2-layer board with 6 parts on 58 nets.

It is built around the 2N2222A. Its parts include 5 ICs and 1 transistor.

Main components

1

Parts

6
QtyValueFootprintReferences
4HX711-ModHx711_load_cell:HX711_moduleU1, U3, U4, U5
12N2222A2N2222A:TO127P584H533-3Q1
1Arduino_R4_WifiArduino_R4_Wifi:MODULE_ABX00087U2

More from Proiect-Krontech/ProiectKrontech

1
  • 4 layers100 × 100 mmSmart pillow, the printed circuit board in 3D

    Smart pillow

    Proiect-Krontech/ProiectKrontech

    34 parts

Similar boards

  • 2 layers101.5 × 83 mmSd2snes, the printed circuit board in 3D

    Sd2snes

    mrehkopf/sd2snes

    SD card based multi-purpose cartridge for the SNES

    154 parts722GPL-2.0
  • 2 layers279.4 × 203.2 mmZ180GDC, the printed circuit board in 3D

    Z180GDC

    lynchaj/rhyophyre

    Single Board Computer featuring Zilog Z180 processor and NEC µPD7220 Graphics Display Controller

    249 parts12
  • 2 layers99.1 × 99.1 mmQL Qsound10x10, the printed circuit board in 3D

    QL Qsound10x10

    alvaroalea/QL_QsoundQprint_clone

    A clone board of the Sound card for the Sinclair QL Computer.

    23 parts11
  • 2 layers156.5 × 67.5 mmNixieScanDisplay, the printed circuit board in 3D

    NixieScanDisplay

    profdc9/NixieClock

    A Nixie clock that uses IN-14 tubes and very generic components that can be easily sourced.

    106 parts10
  • 2 layers89.3 × 50 mmMM58167-ISA RTC, the printed circuit board in 3D

    MM58167-ISA RTC

    jensma-de/MM58167-ISA-RTC

    RTC module for the ISA slot. With schematics, project files in kicad and open source software to drive the clock.

    29 parts9
  • 2 layers97.6 × 76.8 mm12f675-mppt, the printed circuit board in 3D

    12f675-mppt

    rasberryrabbit/PIC12F675MPPT

    Solar MPPT circuit.

    45 parts9GPL-3.0
  • 2 layers14.6 × 13.6 mmChip and transistor, the printed circuit board in 3D

    Chip and transistor

    gidim/e61-gauge

    An analog temperature gauge for E61 espresso machines. A custom PCB drives a VID6606 stepper motor gauge needle, reading temperature from an NTC thermistor.

    15 parts8
  • 2 layers147.2 × 58.3 mmLi IonBatteryProtection, the printed circuit board in 3D

    Li IonBatteryProtection

    cnobile2012/Li-IonBatteryProtection

    Circuit to protect Li-Ion and Li-Po batteries at the cell level.

    81 parts6MIT

Questions

What parts does the Smart pillow use?

6 parts, built around the 2N2222A. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Smart pillow KiCad files?

From the Proiect-Krontech/ProiectKrontech repository on GitHub, at the commit this page was made from: the board is hardware/kicad/smart_pillow/smart_pillow.kicad_pcb and its schematic hardware/future direction/smart_pillow/smart_pillow/smart_pillow.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Smart pillow design in my own project?

Its repository states no licence, so its author keeps all rights: ask Proiect-Krontech before reusing the design.