4 layers67 × 54 mm
ESP32 SIFIVE 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
81 parts15
4 layers85 × 66 mm
Target stack shield
probe-rs/hive15A Raspberry PI shield for testing probe-rs against many chips & probes.
- Size
- 85 × 66 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 44
- Nets
- 134
- Pads
- 454
- Tracks, vias
- 1,852, 249
- Pours
- 5
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Apr 2020
- Updated
- 21 Jan 2022
Overview
Target stack shield is an open-source printed circuit board by probe-rs, from the probe-rs/hive repository on GitHub. It is a 4-layer board of 85 × 66 mm with 44 parts on 134 nets, routed with 1,852 tracks and 249 vias.
It is built around the NCP1117DT33T5G, PCA9535CPW,118 and KRTB AILMS1-5B5C-B1B12-0-R18. Its parts include 16 resistors, 7 capacitors, 6 ICs, 3 connectors and 2 diodes.
Main components
3
NCP1117DT33T5G
TO-252-2(DPAK)0.003%Vout 0℃~+125℃ 1 1.2V@(800mA) 10V 1A 3.3V 64dB@(120Hz) 6mA Fixed Over Current Protection、Over Temperature Protection Positive TO-252-2(DPAK) Voltage Regulators - Linear, Low Drop Out (LDO) Regulators ROHSonsemiVoltage Regulators - Linear, Low Drop Out (LDO) Regulators
PCA9535CPW,118
TSSOP-24-40℃~+85℃ 10mA 16 2.3V~5.5V 250nA 400kHz 8 I2C、SMBus Interrupt Output Open-drain Reset function、Cascading and address extension TSSOP-24 I/O Expanders ROHSNXP SemiconductorsI/O Expanders
KRTB AILMS1-5B5C-B1B12-0-R18
SMD,3.8x1mm-40℃~+85℃ 0.6mm 120° 1mm 3.8mm B:470nm、G:520nm、R:625nm Common Anode G:2.8V~3.4V、B:2.8V~3.4V、R:1.9V~2.5V R:20mA、G:20mA、B:20mA R:5000V、G:5000V、B:5000V R:690mcd、G:1749mcd、B:488mcd SMD,3.8x1mm RGB LEDs ROHSOSRAM Opto SemiconRGB LEDs
README
daughterboard/ESP32_SIFIVE_00/README.mdDaughterboard ESP32_SIFIVE_00
This board features RISC-V and Xtensa cores.
Targets
The following targets are implemented on this Daughterboard:
| Designation | MCU |
|---|---|
| target0 | ESP32-S3-WROOM-1-N8R8 |
| target1 | ESP32-S2 |
| target2 | LOFIVE-R1 (FE310-G002) |
| target3 | ESP32-C3 |
Partlist
The partlist for this Daughterboard is available here.
Other
The target3 and target1 devices have separate flash memory, as the currently available cores do not have any embedded flash.
Parts
44| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R2, R3, R4, R8, R9, R10, R11, R12, R13, R14, R15, R16 |
| 5 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C3, C4, C5, C6, C7 |
| 4 | MountingHole_Pad | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4 |
| 4 | SN74CB3T16211DGGR | hive:SOP50P810X120-56N | U1, U2, U3, U4 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 2 | 6.8k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R7 |
| 1 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R6 |
| 1 | 3.3V OK (green) | hive:LEDC1608X80N | LED1 |
| 1 | 560 | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1 |
| 1 | Address Bit 0 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1 |
| 1 | Address Bit 1 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP2 |
| 1 | Address Bit 2 | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | GPIO shield connector 40pin | hive:PinHeader_2x20_P2.54mm_Vertical_gpio_shield | J1 |
| 1 | KRTB_AILMS1-5B5C-B1B12-0-R18 | hive:KRTBAILMS15B5CB1B120R18 | LED2 |
| 1 | LOGO | hive:probe-rs-logo | G*** |
| 1 | MountingHoleDaughterboard | MountingHole:MountingHole_2.7mm_M2.5 | H5 |
| 1 | NCP1117DT33T5G | hive:TO229P990X238-4N | IC1 |
| 1 | PCA9535CPW,118 | hive:SOP65P640X110-24N | U5 |
| 1 | m2_keyA_67pin | hive:TE_2199230-3 | J3 |
| 1 | probe shield connector 26pin | hive:PinHeader_2x13_P2.54mm_Vertical_probe_shield | J2 |
The 43 most common of 44 parts.
Questions
How big is the Target stack shield PCB?
It measures 85 × 66 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Target stack shield use?
44 parts, built around the NCP1117DT33T5G, PCA9535CPW,118 and KRTB AILMS1-5B5C-B1B12-0-R18. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Target stack shield KiCad files?
From the probe-rs/hive repository on GitHub, at the commit this page was made from: the board is shields/target_stack_shield/target_stack_shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Target stack shield design in my own project?
Its repository states no licence, so its author keeps all rights: ask probe-rs before reusing the design.
More from probe-rs/hive
8- 4 layers67 × 54 mm
ATSAMD 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
66 parts15 - 4 layers67 × 54 mm
LPC 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
63 parts15 - 4 layers67 × 54 mm
STM32 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
61 parts15 - 4 layers67 × 54 mm
NRF 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
56 parts15 - 2 layers85 × 60 mm
Testboard
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
31 parts15 - 4 layers85 × 56 mm
Probe shield
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
18 parts15 - 4 layers67 × 54 mm
Daughterboard template
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
2 parts15
Similar boards
- 2 layers77 × 50.1 mm
RoboCloud
miameows/RoboCloud
2231puppy's Project Stida RoboCloud is an ESP32-S2 robot controller board. It has Wi-Fi courtesy of the ESP32-S2 and can drive 2 4.5A (max) motors. It has a bunch of exposed IO and can handle up to 20V in.
28 partsMIT - 4 layers49 × 30 mm
- 4 layers36.4 × 15 mm
- 4 layers36 × 48 mm
- 4 layers37.1 × 37.2 mm
Doorman
AzonInc/Doorman
ESP32-S3 based Intercom Gateway (TCS / Koch / Niko / Scantron / Analogue Systems)
44 parts252GPL-3.0 - 4 layers90 × 47 mm
- 4 layers62 × 49 mm
Unijoysticle2plus
ricardoquesada/unijoysticle2
Bluetooth gamepad support for the Commodore 64 / Atari / Amiga, etc.
44 parts62 - 4 layers33 × 54.3 mm
BusinessCard OG
StuckAtPrototype/PCB_business_card_original
A custom PCB based "business" card that lets you play a version of Flappy Bird.
44 parts53Apache-2.0