4 layers67 × 54 mm
ESP32 SIFIVE 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
81 parts15
4 layers85 × 56 mm
Probe shield
probe-rs/hive15A Raspberry PI shield for testing probe-rs against many chips & probes.
- Size
- 85 × 56 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 55
- Pads
- 120
- Tracks, vias
- 524, 25
- Pours
- 4
- Routed
- Yes
- KiCad
- KiCad 5 (file 20171130)
- Created
- 24 Apr 2020
- Updated
- 21 Jan 2022
Overview
Probe shield is an open-source printed circuit board by probe-rs, from the probe-rs/hive repository on GitHub. It is a 4-layer board of 85 × 56 mm with 18 parts on 55 nets, routed with 524 tracks and 25 vias.
It is built around the NCP1117DT33T5G. Its parts include 6 connectors, 2 capacitors, 1 resistor, 1 IC and 1 diode. It belongs with the sensors and measurement boards of this library.
Main components
1README
daughterboard/ESP32_SIFIVE_00/README.mdDaughterboard ESP32_SIFIVE_00
This board features RISC-V and Xtensa cores.
Targets
The following targets are implemented on this Daughterboard:
| Designation | MCU |
|---|---|
| target0 | ESP32-S3-WROOM-1-N8R8 |
| target1 | ESP32-S2 |
| target2 | LOFIVE-R1 (FE310-G002) |
| target3 | ESP32-C3 |
Partlist
The partlist for this Daughterboard is available here.
Other
The target3 and target1 devices have separate flash memory, as the currently available cores do not have any embedded flash.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 6 | MountingHole | MountingHole:MountingHole_2.7mm_M2.5_DIN965_Pad | H1, H2, H3, H4, H5, H6 |
| 2 | 10u | Capacitor_SMD:C_0805_2012Metric_Pad1.15x1.40mm_HandSolder | C1, C2 |
| 1 | 3.3V OK (green) | hive:LEDC1608X80N | LED1 |
| 1 | 560 | Resistor_SMD:R_0805_2012Metric_Pad1.15x1.40mm_HandSolder | R1 |
| 1 | GPIO shield connector 40pin | hive:PinHeader_2x20_P2.54mm_Vertical_gpio_shield | J5 |
| 1 | LOGO | hive:probe-rs-logo | G*** |
| 1 | NCP1117DT33T5G | hive:TO229P990X238-4N | IC1 |
| 1 | Probe Channel 0 | hive:SAMTEC_FTSH-105-01-F-DV-007 | J1 |
| 1 | Probe Channel 1 | hive:SAMTEC_FTSH-105-01-F-DV-007 | J2 |
| 1 | Probe Channel 2 | hive:SAMTEC_FTSH-105-01-F-DV-007 | J3 |
| 1 | Probe Channel 3 | hive:SAMTEC_FTSH-105-01-F-DV-007 | J4 |
| 1 | probe shield connector 26pin | hive:PinHeader_2x13_P2.54mm_Vertical_probe_shield_male | J6 |
More from probe-rs/hive
8- 4 layers67 × 54 mm
ATSAMD 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
66 parts15 - 4 layers67 × 54 mm
LPC 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
63 parts15 - 4 layers67 × 54 mm
STM32 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
61 parts15 - 4 layers67 × 54 mm
NRF 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
56 parts15 - 4 layers85 × 66 mm
Target stack shield
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
44 parts15 - 2 layers85 × 60 mm
Testboard
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
31 parts15 - 4 layers67 × 54 mm
Daughterboard template
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
2 parts15
Similar boards
- 2 layers77 × 50.1 mm
RoboCloud
miameows/RoboCloud
2231puppy's Project Stida RoboCloud is an ESP32-S2 robot controller board. It has Wi-Fi courtesy of the ESP32-S2 and can drive 2 4.5A (max) motors. It has a bunch of exposed IO and can handle up to 20V in.
28 partsMIT - 4 layers55 × 72 mm
DB9 Differential Signal Selector
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
18 parts371 - 4 layers18.6 × 34.4 mm
- 4 layers42.4 × 40.8 mm
- 4 layers97.8 × 22.2 mm
- 4 layers100 × 60 mm
Picocart64 v1
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
18 parts26 - 4 layers76 × 31 mm
Vm006-mixbus
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
18 parts21 - 4 layers23.3 × 10.7 mm
Questions
How big is the Probe shield PCB?
It measures 85 × 56 mm and has 4 copper layers, 1.6 mm thick.
What parts does the Probe shield use?
18 parts, built around the NCP1117DT33T5G. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the Probe shield KiCad files?
From the probe-rs/hive repository on GitHub, at the commit this page was made from: the board is shields/probe_shield/probe_shield.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the Probe shield design in my own project?
Its repository states no licence, so its author keeps all rights: ask probe-rs before reusing the design.