

LED Module E Castellation Test
Die beste Lampe
- Size
- 23.3 × 10.7 mm
- Copper layers
- 4
- Thickness
- 1.6 mm
- Parts
- 18
- Nets
- 9
- Pads
- 18
- Tracks, vias
- 30, 0
- Routed
- Yes
- KiCad
- KiCad 8.0 (file 20240108)
- Created
- 22 Dec 2023
- Updated
- 19 Oct 2025
Overview
LED Module E Castellation Test is an open-source printed circuit board by lenaschimmel, from the lenaschimmel/bestelampe repository on GitHub. It is a 4-layer board of 23.3 × 10.7 mm with 18 parts on 9 nets, routed with 30 tracks and 0 vias.
It belongs with the lEDs and displays boards and the ESP32 boards of this library.
README
hardware/ledmodule/LED_Module_D/README.mdLED Module D
DO NOT USE
This module is flawed in countless ways, and I really recommend to not use it in any way. Not as it is, not as a basis for modification.
I just uploaded it for transparency, because I talk a lot about it on the Progress page. You can read about it's problems there.
Goal
This board should make it possible to have up to 10 high power LEDs with different colors aranged in a slim (2mm) and short (20mm) line. A TLC59711 is used to generate the 10 PWM signals, but it is not driving the LEDs directly. Instead, a line driver, MOSFETs and series resistors are used to power the LEDs without the complexities of a constant current drive.
Parts
18| Qty | Value | Footprint | References |
|---|---|---|---|
| 18 | Conn_01x01 | TestPoint:TestPoint_THTPad_1.0x1.0mm_Drill0.5mm | K1, K1, K2, K2, K3, K3, K4, K4, K5, K5, K6, K6, K7, K7, K8, K8 +2 |
More from lenaschimmel/bestelampe
12- 2 layers215.2 × 163.6 mm

- 2 layers214.6 × 70.5 mm

- 4 layers51.7 × 29.5 mm

- 4 layers140.8 × 26 mm

- 4 layers70 × 79.1 mm

- 2 layers83.8 × 61 mm

- 4 layers21.1 × 59.9 mm

- 4 layers56.5 × 124 mm

- 2 layers110 × 80.4 mm

- 4 layers140.8 × 28.5 mm

- 2 layers65.5 × 58.4 mm

- 2 layers22.9 × 28.4 mm

Similar boards
- 4 layers55 × 72 mm

DB9 Differential Signal Selector
nanographs/Open-Beam-Interface
Just what you need to control the beam and get an image.
18 parts371 - 4 layers18.6 × 34.4 mm

- 4 layers42.4 × 40.8 mm

- 4 layers97.8 × 22.2 mm

- 4 layers100 × 60 mm

Picocart64 v1
khill25/Dreamdrive
Open source Retro Rom Carts and ODEs by Dreamcraft Industries
18 parts26 - 4 layers76 × 31 mm

Vm006-mixbus
mirdej/vmix
Multichannel modular analog PAL video mixer based on the SYNKIE project
18 parts21 - 4 layers85 × 56 mm

Probe shield
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.
18 parts15 - 4 layers76 × 88.8 mm

Questions
How big is the LED Module E Castellation Test PCB?
It measures 23.3 × 10.7 mm and has 4 copper layers, 1.6 mm thick.
What parts does the LED Module E Castellation Test use?
18 parts. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
Where can I download the LED Module E Castellation Test KiCad files?
From the lenaschimmel/bestelampe repository on GitHub, at the commit this page was made from: the board is hardware/abl/LED_Module_E/LED_Module_E_ Castellation_Test.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Can I use the LED Module E Castellation Test design in my own project?
Its repository states no licence, so its author keeps all rights: ask lenaschimmel before reusing the design.