
ESP32 SIFIVE 00
probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.

A Raspberry PI shield for testing probe-rs against many chips & probes.
LPC 00 is an open-source printed circuit board by probe-rs, from the probe-rs/hive repository on GitHub. It is a 4-layer board of 67 × 54 mm with 63 parts on 148 nets, routed with 947 tracks and 123 vias.
It is built around the LPC55S69JBD64K and LPC845M301JHI33Y. Its parts include 18 capacitors, 13 resistors, 4 ICs, 1 connector and 1 inductor. It belongs with the NXP (LPC, Kinetis, i.MX RT) boards of this library.
This board features RISC-V and Xtensa cores.
The following targets are implemented on this Daughterboard:
| Designation | MCU |
|---|---|
| target0 | ESP32-S3-WROOM-1-N8R8 |
| target1 | ESP32-S2 |
| target2 | LOFIVE-R1 (FE310-G002) |
| target3 | ESP32-C3 |
The partlist for this Daughterboard is available here.
The target3 and target1 devices have separate flash memory, as the currently available cores do not have any embedded flash.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 12 | 100n | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C2, C3, C5, C6, C8, C11, C12, C13, C14, C15, C17, C18 |
| 8 | 100k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R1, R2, R3, R4, R7, R11, R12, R13 |
| 5 | 10k | Resistor_SMD:R_0603_1608Metric_Pad1.05x0.95mm_HandSolder | R5, R6, R8, R9, R10 |
| 4 | NRST | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP1, JP2, JP4, JP5 |
| 4 | USART_RX | TestPoint:TestPoint_Pad_1.0x1.0mm | TP6, TP17, TP27, TP37 |
| 4 | USART_TX | TestPoint:TestPoint_Pad_1.0x1.0mm | TP5, TP16, TP26, TP36 |
| 3 | 4.7u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C1, C4, C16 |
| 3 | SWCLK | TestPoint:TestPoint_Pad_1.0x1.0mm | TP2, TP23, TP33 |
| 3 | SWDIO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP1, TP22, TP32 |
| 2 | 22u | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C7, C10 |
| 2 | SWO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP24, TP34 |
| 1 | 4.7u | hive_daughterboard:TYA40204R7M-10 | L1 |
| 1 | 47p | Capacitor_SMD:C_0603_1608Metric_Pad1.05x0.95mm_HandSolder | C9 |
| 1 | LPC1114FDH28_102_5 | hive_daughterboard:LPC1114FDH28_1025 | U1 |
| 1 | LPC1313FBD48_01,15 | hive_daughterboard:LPC1313FBD48_0115 | U3 |
| 1 | LPC55S69JBD64K | hive_daughterboard:LPC55S69JBD64K | U2 |
| 1 | LPC845M301JHI33Y | hive_daughterboard:LPC845M301JHI33Y | U0 |
| 1 | MountingHoleDaughterboard | MountingHole:MountingHole_2.7mm_M2.5 | H1 |
| 1 | NJRST | Jumper:SolderJumper-2_P1.3mm_Open_TrianglePad1.0x1.5mm | JP3 |
| 1 | SWCLK-TCLK | TestPoint:TestPoint_Pad_1.0x1.0mm | TP12 |
| 1 | SWDIO-TMS | TestPoint:TestPoint_Pad_1.0x1.0mm | TP11 |
| 1 | TDI | TestPoint:TestPoint_Pad_1.0x1.0mm | TP14 |
| 1 | TDO | TestPoint:TestPoint_Pad_1.0x1.0mm | TP13 |
| 1 | m2_keyA_67pin_daughterboard | hive:m2_keyB | J1 |

probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.

probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.

probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.

probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.

probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.

probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.

probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.

probe-rs/hive
A Raspberry PI shield for testing probe-rs against many chips & probes.

schrodlm/nxp_hal
In this assignment the target platform changes from the STM32F407 to the NXP S32K118, an Arm Cortex‑M0+ microcontroller from the S32K1xx automotive family.

loxodes/vna
Under development open hardware microwave vector network analyzer

pierre-muth/fast-flipdot
Driving a flipdot matrix differently. All dots simultaneously.

lab11/signpost
Exploring what happens when you put computers on sign posts.


AndersBNielsen/PhaseLatchMini
High-rate continuous streaming of interleaved dual ADC (I/Q) samples over USB Full‑Speed (FS) using only the built‑in CDC class on an STM32F103C8 ("Blue Pill" style) board.

jlcjak/neurband
Open, minimal sEMG wristband like the Meta Neural Band: 8-ch ADS1298 + nRF52832 BLE, dry gold electrodes on a flex, 3D-printed band. KiCad, FreeCAD, Zephyr, Python, simulations.

It measures 67 × 54 mm and has 4 copper layers, 0.8 mm thick.
63 parts, built around the LPC55S69JBD64K and LPC845M301JHI33Y. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the probe-rs/hive repository on GitHub, at the commit this page was made from: the board is daughterboard/LPC_00/LPC_00.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask probe-rs before reusing the design.