Skip to the content
4 layers71 × 10 mm001 dot flipper, the printed circuit board in 3D

Driving a flipdot matrix differently. All dots simultaneously.

Size
71 × 10 mm
Copper layers
4
Thickness
1.6 mm
Parts
63
Nets
50
Pads
204
Tracks, vias
239, 17
Pours
2
Routed
Yes
KiCad
KiCad 5 (file 20171130)
Created
18 Feb 2021
Updated
18 Feb 2021

Overview

001 dot flipper is an open-source printed circuit board by pierre-muth, from the pierre-muth/fast-flipdot repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 71 × 10 mm with 63 parts on 50 nets, routed with 239 tracks and 17 vias.

It is built around the BSS138 and DMG6602SVT. Its parts include 21 resistors, 16 capacitors, 14 transistors, 7 connectors and 3 ICs. It belongs with the lEDs and displays boards and the PIC boards of this library.

Main components

2

README

README.md

fast-flipdot

Driving a flipdot matrix differently. All dots simultaneously. story here : https://pierremuth.wordpress.com/2021/02/17/flipping-dots-fast/ video here : https://youtu.be/6l5hH8V9uUo

matrix

Parts

63
QtyValueFootprintReferences
21100Kdot_flipper:R_0805R1, R2, R3, R4, R10, R11, R12, R13, R14, R15, R16, R17, R18, R19, R20, R21 +5
1410udot_flipper:C_0805C1, C2, C3, C4, C5, C6, C7, C8, C11, C12, C13, C14, C15, C16
7BSS138dot_flipper:SOT-23-wideQ2, Q4, Q6, Q8, Q10, Q12, Q14
7DMG6602SVTdot_flipper:SOT-23-6_HandsolderingQ1, Q3, Q5, Q7, Q9, Q11, Q13
6Conn_01x02_Maledot_flipper:Pin_Header_Straight_1x02_Pitch2.54mmJ1, J2, J3, J4, J6, J7
21udot_flipper:C_0805C9, C10
2MountingHole_Paddot_flipper:MountingHole_2.2mm_M2_Pad_thinH1, H2
17_flip_dotsdot_flipper:7_flip_dotsU1
1Conn_01x05_MalePin_Headers:Pin_Header_Straight_1x05_Pitch1.27mmJ5
1NCP718BSN500T1Gdot_flipper:SOT-23-5_HandSolderingU3
1PIC16F15355-I-MVdot_flipper:QFN-28-1EP_4x4mm_Pitch0.4mm_wideU2

More from pierre-muth/fast-flipdot

2
  • 4 layers71 × 10 mmDot flipper, the printed circuit board in 3D

    Dot flipper

    pierre-muth/fast-flipdot

    Driving a flipdot matrix differently. All dots simultaneously.

    57 parts145GPL-3.0
  • 4 layers71 × 10 mmOrdered jlcpcb 003 dot flipper, the printed circuit board in 3D

    Ordered jlcpcb 003 dot flipper

    pierre-muth/fast-flipdot

    Driving a flipdot matrix differently. All dots simultaneously.

    56 parts145GPL-3.0

Similar boards

  • 4 layers36 × 50.2 mmRacer, the printed circuit board in 3D

    Racer

    StuckAtPrototype/Racer

    These are structured into their own files. I could have used submodules, but decided against it.

    83 parts3.8kApache-2.0
  • 4 layers95 × 95 mmCube motherboard, the printed circuit board in 3D

    Cube motherboard

    willem-pennings/balancing-cube

    A cube that balances itself in a corner or edge using reaction wheels

    52 parts1.1kGPL-3.0
  • 2 layers54.6 × 70.9 mmBeagleLogic Cape, the printed circuit board in 3D

    BeagleLogic Cape

    abhishek-kakkar/BeagleLogic

    A Software Suite that implements a logic analyzer with the PRU on the BeagleBone / BeagleBone Black.

    22 parts479GPL-3.0
  • 2 layers44.2 × 29.3 mmI2c tiny usb, the printed circuit board in 3D

    I2c tiny usb

    harbaum/I2C-Tiny-USB

    Cheap and simple I²C to USB interface

    27 parts454
  • 2 layers21.6 × 52.3 mmPs2 pico hat, the printed circuit board in 3D

    Ps2 pico hat

    No0ne/ps2x2pico

    USB keyboard/mouse to PS/2 interface converter using a Raspberry Pi Pico

    17 parts399MIT
  • 2 layers45 × 45 mmAirCube, the printed circuit board in 3D

    AirCube

    StuckAtPrototype/AirCube

    Works standalone out of the box. Pairs with Home Assistant in minutes. Other platforms are supported through community-contributed extensions.

    61 parts379Apache-2.0
  • 4 layers74 × 104 mmBeepy, the printed circuit board in 3D

    Beepy

    sqfmi/beepy-hardware

    Beepy Hardware

    160 parts348MIT

Questions

How big is the 001 dot flipper PCB?

It measures 71 × 10 mm and has 4 copper layers, 1.6 mm thick.

What parts does the 001 dot flipper use?

63 parts, built around the BSS138 and DMG6602SVT. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the 001 dot flipper KiCad files?

From the pierre-muth/fast-flipdot repository on GitHub, at the commit this page was made from: the board is kicad/dot_flipper/001_dot_flipper.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the 001 dot flipper design in my own project?

Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).