Skip to the content
2 layers80 × 27 mmAom preamp, the printed circuit board in 3D

A simple transistor based amplifier for electret condenser type mics coupled with CM108b USB audio interface

Size
80 × 27 mm
Copper layers
2
Thickness
1.6 mm
Parts
49
Nets
63
Pads
161
Tracks, vias
202, 24
Pours
2
Routed
Yes
KiCad
KiCad 9.0 (file 20241229)
Created
6 May 2025
Updated
21 May 2025

Overview

Aom preamp is an open-source printed circuit board by pranavb104, from the pranavb104/Electret-Amp-USB repository on GitHub. It is a 2-layer board of 80 × 27 mm with 49 parts on 63 nets, routed with 202 tracks and 24 vias.

It is built around the CM108B, MF-FSMF050X-2 and PJ-320B. Its parts include 16 resistors, 13 capacitors, 5 transistors, 3 connectors and 2 ICs. It belongs with the audio and music boards of this library.

Main components

3

README

README.md

Electret-Amp-USB

A simple transistor based amplifier for electret condenser type mics coupled with CM108b USB audio interface

Parts

49
QtyValueFootprintReferences
4100nFCapacitor_SMD:C_0805_2012MetricC6, C11, C13, C14
4MountingHole_2.7mm_M2.5MountingHole:MountingHole_2.7mm_M2.5M1, M2, M3, M4
3+33uFCapacitor_SMD:CP_Elec_5x5.4C2, C3, C5
3220RResistor_SMD:R_0805_2012MetricR10, R15, R17
333KResistor_SMD:R_0805_2012MetricR6, R7, R9
34.7uFCapacitor_SMD:C_0805_2012MetricC9, C10, C12
3BC859Package_TO_SOT_SMD:SOT-23Q2, Q3, Q4
2100KResistor_SMD:R_0805_2012MetricR1, R4
2100RResistor_SMD:R_0805_2012MetricR8, R16
210KResistor_SMD:R_0805_2012MetricR2, R5
222RResistor_SMD:R_0805_2012MetricR12, R13
230mOhmInductor_SMD:L_0603_1608MetricFB1, FB2
2BC849Package_TO_SOT_SMD:SOT-23Q1, Q5
2MF-FSMF050X-2Fuse:Fuse_0603_1608MetricF1, F2
1+100uFCapacitor_SMD:CP_Elec_5x5.4C4
1+10uFCapacitor_SMD:CP_Elec_5x5.4C1
1+470uFCapacitor_SMD:CP_Elec_6.3x7.7C7
11.5KResistor_SMD:R_0805_2012MetricR14
11KResistor_SMD:R_0805_2012MetricR3
1Battery_9VConnector_JST:JST_PH_B2B-PH-SM4-TB_1x02-1MP_P2.00mm_VerticalJ1
1CM108BTQFP48:TQFP48U1
1PC817Package_DIP:DIP-4_W7.62mm_SMDSocket_SmallPadsU2
1PJ-320BBOOMELE_PJ-320B:BOOMELE_PJ-320BJ4
1PullUpJumper:SolderJumper-2_P1.3mm_Open_RoundedPad1.0x1.5mmJP2
1RED_LEDLED_SMD:LED_0603_1608MetricD1
1USB_B_MiniConnector_USB:USB_Mini-B_Wuerth_65100516121_HorizontalJ3

Similar boards

  • 2 layers22.8 × 36 mmDigirig mobile, the printed circuit board in 3D

    Digirig mobile

    softcomplex/Digirig-Mobile

    Integrated digital modes interface for amateur radio

    64 parts133GPL-3.0
  • 2 layers40 × 22.8 mmDigiport-891, the printed circuit board in 3D

    Digiport-891

    BD5HLI/DigiPort

    集成USB口和声卡的业余电台数据模式接口盒子

    45 parts15GPL-3.0
  • 4 layers101.6 × 141.7 mmPiPtr, the printed circuit board in 3D

    PiPtr

    jmlzone/PiPtr

    Repeater controller

    388 parts8
  • 2 layers60 × 50 mmCm108b eval, the printed circuit board in 3D

    Cm108b eval

    k0swe/cm108b-eval

    Eval board for CM108B USB audio controller

    43 parts7CC-BY-4.0
  • 2 layers334.6 × 100.2 mmLira, the printed circuit board in 3D

    Lira

    AndreaGiulianini/lira

    57-key 40% + numpad keyboard: Bluetooth/USB-C, hot-swap MX, RMK/Vial, and a built-in USB sound card (3.5 mm headset jack). Generated from source with KiCad.

    233 parts2MIT
  • 2 layers87.5 × 53 mmInterfejs digi, the printed circuit board in 3D

    Interfejs digi

    canislupus11/Digi_interface

    Universal ham radio digi interface.

    104 parts1
  • 2 layers55 × 55 mmUSB-2-3.5mm, the printed circuit board in 3D

    USB-2-3.5mm

    zkp-1/USB-2-3.5mm

    USB to Aux circuit

    45 parts1
  • 2 layers144.1 × 108.1 mmNano server, the printed circuit board in 3D

    Nano server

    ra0sms/nano-server

    Server for hamradio remote operation

    117 partsMIT

Questions

How big is the Aom preamp PCB?

It measures 80 × 27 mm and has 2 copper layers, 1.6 mm thick.

What parts does the Aom preamp use?

49 parts, built around the CM108B, MF-FSMF050X-2 and PJ-320B. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Aom preamp KiCad files?

From the pranavb104/Electret-Amp-USB repository on GitHub, at the commit this page was made from: the board is aom-preamp.kicad_pcb and its schematic aom-preamp.kicad_sch. PCBKit opens the board in the browser, with nothing to install.

Can I use the Aom preamp design in my own project?

Its repository states no licence, so its author keeps all rights: ask pranavb104 before reusing the design.