Skip to the content
12

MF-FSMF050X-2

BournsExtended

-40℃~+85℃ 0.8mm 1.6mm 100mΩ 1A 40A 500mA 500mW 6V 800mΩ 0603 Resettable Fuses ROHS

Part id
bourns/MF-FSMF050X-2
Category
Resettable Fuses
Package
0603
Pins
2
In stock
67,026 at JLCPCB (C210357)
Used on
29 open-source boards

Overview

The MF-FSMF050X-2 is a resettable Fuse made by Bourns in a 0603 package with 2 pins. -40℃~+85℃ 0.8mm 1.6mm 100mΩ 1A 40A 500mA 500mW 6V 800mΩ 0603 Resettable Fuses ROHS.

PCBKit's library has its KiCad symbol (Device:Polyfuse, from KiCad's library) and its footprint (Fuse:Fuse_0603_1608Metric, from KiCad's library), ready for a KiCad board. 67,026 are in stock at JLCPCB (part C210357). 29 open-source boards in 25 repositories on GitHub use it.

Symbol

Device:PolyfuseFrom KiCad's library

Footprint

12
Fuse:Fuse_0603_1608MetricFrom KiCad's library

Pinout

2
The pins of the MF-FSMF050X-2
PinNameType
1—Passive
2—Passive

Open-source boards using it

29See all 29
  • 2 layers29 × 12 mmUbmp v1, the printed circuit board in 3D

    Ubmp v1

    korken89/micro-bmp

    A small Black Magic Probe based on the pinout of the STLink V2 support firmware

    25 parts37
  • 2 layers79.9 × 41.4 mmGR ESP32-A1S, the printed circuit board in 3D

    GR ESP32-A1S

    GadgetReboot/ESP32-A1S

    Breakout PCB for the ESP32-A1S module including an audio amp and basic GPIO headers, USB interface

    65 parts27
  • 2 layers61.5 × 25 mmMKRZero V5.0, the printed circuit board in 3D

    MKRZero V5.0

    hulkco/oshwi

    Upload "Oshwi" Badge for OshwDem 2017 a Coruña

    94 parts15
  • 2 layers50.7 × 27.9 mmGR Rotary USB, the printed circuit board in 3D

    GR Rotary USB

    GadgetReboot/RotaryUSB

    LS30 Rotary Joystick to USB Interface

    17 parts7
  • 2 layers25 × 10 mmUdap usb c, the printed circuit board in 3D

    Udap usb c

    korken89/micro-dap

    A small CMSIS-DAP probe, based on the pinout of the dap42 firmware.

    26 parts7
  • 4 layers90.6 × 58.1 mmEcoApi pcb, the printed circuit board in 3D

    EcoApi pcb

    EcoApi/EcoApi_BeeHiveMonitoring

    describ options with 0R resistors. etc ...

    179 parts4GPL-3.0
  • 2 layers35.7 × 27.9 mmGR USB Serial, the printed circuit board in 3D

    GR USB Serial

    GadgetReboot/USB_Serial

    3.3v/5v CH340 USB to UART interface with all flow control and indicator signals broken out

    23 parts4
  • 2 layers42.5 × 37.9 mmRotary USB, the printed circuit board in 3D

    Rotary USB

    GadgetReboot/Rotary_USB

    LS30 to MAME Interface

    30 parts2

Parts like it

8

Questions

Is there a KiCad symbol and footprint for the MF-FSMF050X-2?

Yes. The symbol is Device:Polyfuse and the footprint Fuse:Fuse_0603_1608Metric, both drawn on this page. PCBKit places them on a board for you when you design with it.

What package is the MF-FSMF050X-2?

0603, with 2 pins. Its footprint is drawn on this page.

Where is the MF-FSMF050X-2 datasheet?

Bourns publishes it: the Datasheet link on this page opens it.

Where can I order the MF-FSMF050X-2?

JLCPCB lists it as part C210357, with 67,026 in stock; the sellers' links on this page open their listings.

What can replace the MF-FSMF050X-2?

Parts like it in the library: the JK-SMD0603-010 by Jinrui Electronic Materials Co., the BSMD0603-005-33V by BHFUSE, the 0603L050/6AR by LUTE and the SMD0603-005-24V by 台湾陆海. Check their datasheets: a part that fits the footprint may still differ in its ratings.

Which open-source boards use the MF-FSMF050X-2?

29 boards in 25 repositories on GitHub; the most starred are listed on this page, with their KiCad files.