
Panning Mixer
powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

Where I will be collecting documentation for all my synth parts
Processor Board is an open-source printed circuit board by powsplatboom, from the powsplatboom/Synth-DIY repository on GitHub. It is a 2-layer board of 66 × 100 mm with 74 parts on 80 nets, routed with 729 tracks and 77 vias.
It is built around the ATMEGA644P-20PU and 24LC1025-I/P. Its parts include 24 capacitors, 18 resistors, 9 diodes, 5 ICs and 4 connectors. It belongs with the AVR (ATmega, ATtiny) boards of this library.
| Qty | Value | Footprint | References |
|---|---|---|---|
| 11 | 100nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C3, C5, C7, C9, C10, C14, C15, C17, C18, C23, C24 |
| 5 | 10k | Potentiometer_THT:Potentiometer_Bourns_3296W_Vertical | RV1, RV2, RV3, RV4, RV5 |
| 5 | 1N4148 | Diode_THT:D_DO-35_SOD27_P7.62mm_Horizontal | D1, D6, D7, D8, D9 |
| 4 | 100R | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R7, R8, R9, R10 |
| 4 | 100k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R15, R16, R17, R18 |
| 4 | 100n | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C11, C12, C13, C16 |
| 4 | 10nf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C19, C20, C21, C22 |
| 4 | 1M | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R11, R12, R13, R14 |
| 4 | 1k | Resistor_SMD:R_1206_3216Metric_Pad1.30x1.75mm_HandSolder | R3, R4, R5, R6 |
| 3 | 10uf | Capacitor_THT:CP_Radial_D5.0mm_P2.00mm | C4, C6, C8 |
| 3 | 1n4733 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D2, D4, D5 |
| 3 | Ferrite_Bead | Inductor_THT:L_Axial_L9.5mm_D4.0mm_P5.08mm_Vertical_Fastron_SMCC | FB1, FB2, FB3 |
| 3 | TL074 | Package_SO:SO-14_3.9x8.65mm_P1.27mm | U1, U2, U3 |
| 2 | 22pf | Capacitor_SMD:C_0805_2012Metric_Pad1.18x1.45mm_HandSolder | C1, C2 |
| 2 | MountingHole_3.2mm_M3 | MountingHole:MountingHole_3.2mm_M3 | m3, m3 |
| 1 | 10uH | Inductor_THT:L_Axial_L5.0mm_D3.6mm_P10.00mm_Horizontal_Murata_BL01RN1A2A2 | L1 |
| 1 | 16 MHz | Crystal:Crystal_HC49-4H_Vertical | Y1 |
| 1 | 1N4733 | Diode_THT:D_DO-41_SOD81_P7.62mm_Horizontal | D3 |
| 1 | 24LC1025 | Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm | U5 |
| 1 | 330 | Resistor_SMD:R_0805_2012Metric_Pad1.20x1.40mm_HandSolder | R1 |
| 1 | 4.7k | Resistor_SMD:R_1210_3225Metric_Pad1.30x2.65mm_HandSolder | R2 |
| 1 | ATmega644P-20PU | Package_DIP:DIP-40_W15.24mm | U4 |
| 1 | Conn_01x32_Female | Connector_PinSocket_2.54mm:PinSocket_1x32_P2.54mm_Vertical | J4 |
| 1 | Conn_02x03_Odd_Even | Connector_IDC:IDC-Header_2x03_P2.54mm_Vertical | J2 |
| 1 | Conn_02x05_Odd_Even | Connector_PinSocket_2.54mm:PinSocket_2x05_P2.54mm_Vertical | J3 |
| 1 | Conn_02x08_Odd_Even | Connector_IDC:IDC-Header_2x08_P2.54mm_Vertical | J1 |
| 1 | SW_MEC_5G | Button_Switch_SMD:SW_DIP_SPSTx01_Slide_6.7x4.1mm_W6.73mm_P2.54mm_LowProfile_JPin | SW1 |
The 73 most common of 74 parts.

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts

powsplatboom/Synth-DIY
Where I will be collecting documentation for all my synth parts


futureshocked/KLP4e_MCU-Datalogger
This is the repository for the "MCU Datalogger" project.

portlandhodl/nyan-keys-hardware
Hardware document for the nyan keys keyboard

the78mole/km271-wifi
A piece of hardware to be installed in a Buderus Logamatic 2107 to provide control and status over WiFi

futureshocked/KicadLikeAPro-Project-3-BACEE
This is one of the PCB projects from the Kicad Like a Pro book. It contains a two and four layer board that implements an Arduino clone with external EEPROM and a clock.

MacMannes/XVA1-User-Interface
A hardware user interface for the XVA1 virtual analog synthesizer, inspired by the Hydrasynth's layout. The XVA1 (and its FM sibling the XFM2) is built on an Artix-7 FPGA but has no built-in UI — this project adds one.

cclienti/tig-welder
A DIY TIG welder that can be plugged to a traditionnal stick welder or to a high current source

DevMajed/DataLogger-Board
Hardware PCB Design for AVR-based Datalogger using KiCAD
It measures 66 × 100 mm and has 2 copper layers, 1.6 mm thick.
74 parts, built around the ATMEGA644P-20PU and 24LC1025-I/P. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the powsplatboom/Synth-DIY repository on GitHub, at the commit this page was made from: the board is In Process/Drum Sequencer/Processor Board/Processor Board/Processor Board.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.
Its repository states no licence, so its author keeps all rights: ask powsplatboom before reusing the design.