Skip to the content
4 layers243.8 × 100 mmPanning Mixer, the printed circuit board in 3D

Where I will be collecting documentation for all my synth parts

Size
243.8 × 100 mm
Copper layers
4
Thickness
1.6 mm
Parts
633
Nets
572
Pads
2,069
Tracks, vias
0, 0
Routed
Not yet
KiCad
KiCad 5 (file 20171130)
Created
18 Sep 2021
Updated
14 Aug 2023

Overview

Panning Mixer is an open-source printed circuit board by powsplatboom, from the powsplatboom/Synth-DIY repository on GitHub. It is a 4-layer board of 243.8 × 100 mm with 633 parts on 572 nets.

It is built around the TL072 and BZX55C2V0. Its parts include 364 resistors, 106 capacitors, 50 diodes, 46 ICs and 39 connectors. It belongs with the audio and music boards of this library.

Main components

2

Parts

633
QtyValueFootprintReferences
206100kResistor_SMD:R_0603_1608MetricR1, R10, R11, R12, R100, R111, R112, R113, R114, R115, R117, R119, R120, R121, R122, R123 +190
89100nfCapacitor_SMD:C_0603_1608MetricC10, C11, C12, C13, C14, C15, C18, C19, C20, C23, C100, C101, C102, C103, C104, C106 +73
34PJ301_THONKICONN1Connector_Audio:PJ-3001_Mono_PhoneJ1, J2, J10, J11, J12, J13, J14, J15, J16, J18, J19, J20, J21, J22, J23, J24 +18
28TL074Package_SO:SOIC-14_3.9x8.7mm_P1.27mmU1, U2, U10, U11, U13, U14, U16, U17, U19, U20, U22, U23, U25, U26, U28, U29 +12
2416kResistor_SMD:R_0603_1608MetricR17, R18, R107, R108, R131, R132, R150, R151, R174, R175, R193, R194, R217, R218, R236, R237 +8
242.4kResistor_SMD:R_0603_1608MetricR19, R20, R109, R110, R133, R134, R152, R153, R176, R177, R195, R196, R219, R220, R238, R239 +8
2420kResistor_SMD:R_0603_1608MetricR13, R14, R103, R104, R127, R128, R146, R147, R170, R171, R189, R190, R213, R214, R232, R233 +8
2447KResistor_SMD:R_0603_1608MetricR15, R16, R105, R106, R129, R130, R148, R149, R172, R173, R191, R192, R215, R216, R234, R235 +8
24BZX55C2V0Diode_SMD:D_SOD-123D23, D24, D25, D26, D27, D28, D29, D30, D31, D32, D33, D34, D35, D36, D37, D38 +8
201KResistor_SMD:R_0603_1608MetricR37, R38, R39, R40, R41, R42, R43, R44, R45, R46, R47, R48, R49, R50, R51, R52 +4
18110kResistor_SMD:R_0603_1608MetricR22, R58, R101, R102, R136, R144, R145, R179, R187, R188, R222, R230, R231, R265, R273, R274 +2
16R_POT_DualPotentiometer_THT:Potentiometer_Alpha_RD902F-40-00D_Dual_VerticalRV13, RV14, RV15, RV16, RV17, RV18, RV19, RV20, RV21, RV22, RV23, RV24, RV25, RV26, RV27, RV28
14LEDLED_SMD:LED_0805_2012MetricD4, D5, D6, D7, D8, D9, D10, D14, D15, D16, D17, D18, D19, D20
12120kResistor_SMD:R_0603_1608MetricR2, R4, R73, R75, R116, R118, R159, R161, R202, R204, R245, R247
124n7Capacitor_SMD:C_0603_1608MetricC3, C4, C21, C22, C35, C36, C49, C50, C63, C64, C77, C78
12AS3360Package_DIP:DIP-14_W7.62mm_SocketU9, U12, U15, U18, U21, U24, U27, U30, U33, U36, U39, U42
12R_POTPotentiometer_THT:Potentiometer_Alpha_RD901F-40-00D_Single_VerticalRV1, RV2, RV3, RV4, RV5, RV6, RV7, RV8, RV9, RV10, RV11, RV12
610kResistor_SMD:R_0603_1608MetricR29, R30, R31, R32, R359, R360
61kResistor_SMD:R_0603_1608MetricR305, R306, R329, R330, R363, R364
41N4148Diode_THT:D_DO-35_SOD27_P7.62mm_HorizontalD47, D48, D49, D50
4LED_YELLOWLED_SMD:LED_0805_2012MetricD2, D3, D12, D13
3TL072Package_SO:SOIC-8_3.9x4.9mm_P1.27mmU3, U44, U46
2100nCapacitor_SMD:C_0603_1608MetricC16, C17
210ufCapacitor_SMD:CP_Elec_5x5.4C1, C2
21N5819Diode_THT:D_DO-41_SOD81_P10.16mm_HorizontalD21, D22
2LED_REDLED_SMD:LED_0805_2012MetricD1, D11
10.33ufCapacitor_SMD:C_0603_1608MetricC105
1AudioMeter_leftPackage_DIP:DIP-14_W7.62mm_Socket_LongPadsU4
1AudioMeter_rightPackage_DIP:DIP-14_W7.62mm_Socket_LongPadsU5
1Conn_01x18_FemaleConnector_PinSocket_2.54mm:PinSocket_1x18_P2.54mm_VerticalJ29
1Conn_01x18_MaleConnector_PinHeader_2.54mm:PinHeader_1x18_P2.54mm_VerticalJ26
1Conn_01x36_FemaleConnector_PinSocket_2.54mm:PinSocket_1x36_P2.54mm_VerticalJ28
1Conn_01x36_MaleConnector_PinHeader_2.54mm:PinHeader_1x36_P2.54mm_VerticalJ27
1Conn_02x08_Odd_EvenConnector_IDC:IDC-Header_2x08_P2.54mm_VerticalJ17
1L78L05_SOT89Package_TO_SOT_SMD:SOT-89-3U6

More from powsplatboom/Synth-DIY

12
  • 4 layers170 × 100 mmSpring Reverb, the printed circuit board in 3D

    Spring Reverb

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    313 parts11
  • 2 layers210 × 106 mmControl Board, the printed circuit board in 3D

    Control Board

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    291 parts11
  • 2 layers399.8 × 72 mmUtility board, the printed circuit board in 3D

    Utility board

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    242 parts11
  • 4 layers84 × 100 mmSSI2130 Oscillator, the printed circuit board in 3D

    SSI2130 Oscillator

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    185 parts11
  • 2 layers120 × 100 mmStereo Mixer, the printed circuit board in 3D

    Stereo Mixer

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    121 parts11
  • 2 layers66 × 100 mmProcessor Board, the printed circuit board in 3D

    Processor Board

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    74 parts11
  • 2 layers71.1 × 95 mmFeed Forward Compressor 14HP, the printed circuit board in 3D

    Feed Forward Compressor 14HP

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    54 parts11
  • 2 layers49.5 × 95 mmFeed Forward Compressor, the printed circuit board in 3D

    Feed Forward Compressor

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    49 parts11
  • 2 layers40 × 70 mmOutputBoard 2, the printed circuit board in 3D

    OutputBoard 2

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    45 parts11
  • 2 layers40 × 70 mmOutputBoard, the printed circuit board in 3D

    OutputBoard

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    37 parts11
  • 2 layers30 × 70 mmBIGRIG OUTPUT, the printed circuit board in 3D

    BIGRIG OUTPUT

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    26 parts11
  • 2 layers139.7 × 78.7 mmRectifier, the printed circuit board in 3D

    Rectifier

    powsplatboom/Synth-DIY

    Where I will be collecting documentation for all my synth parts

    23 parts11

Similar boards

  • 2 layers148 × 84.5 mmPanel daisy, the printed circuit board in 3D

    Panel daisy

    ohmtech-rdi/eurorack-blocks

    Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

    259 parts410
  • 2 layers39.6 × 99.1 mmESP32-Eurorack Audio, the printed circuit board in 3D

    ESP32-Eurorack Audio

    ctag-fh-kiel/ctag-tbd

    CTAG TBD >>to be determined<< an extendible open source Eurorack sound module

    128 parts260
  • 4 layers121.9 × 109.2 mmPlinkyblack hwmidi jacks, the printed circuit board in 3D

    Plinkyblack hwmidi jacks

    plinkysynth/plinky_public

    a public release of the plinky sw and hw

    300 parts227
  • 2 layers58 × 110 mmVco core, the printed circuit board in 3D

    Vco core

    shmoergh/moduleur

    Fully analog DIY-friendly modular synth

    146 parts222
  • 2 layers37 × 113.9 mmVCO, the printed circuit board in 3D

    VCO

    nickajeglin/Eurorack-pcbs

    A collection of easy to solder DIY eurorack PCB's

    104 parts208
  • 2 layers111.3 × 106.4 mmSuper Sixteen v1, the printed circuit board in 3D

    Super Sixteen v1

    matthewcieplak/super-sixteen

    Code and schematics for the Super Sixteen Eurorack sequencer

    141 parts171
  • 2 layers85.1 × 62.2 mmMic extension board, the printed circuit board in 3D

    Mic extension board

    StoneRose35/cortexguitarfx

    guitar effects processor implemented on various arm cortex platforms

    75 parts146

Questions

How big is the Panning Mixer PCB?

It measures 243.8 × 100 mm and has 4 copper layers, 1.6 mm thick.

What parts does the Panning Mixer use?

633 parts, built around the TL072 and BZX55C2V0. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.

Where can I download the Panning Mixer KiCad files?

From the powsplatboom/Synth-DIY repository on GitHub, at the commit this page was made from: the board is In Process/CV_Panning_Mixer/Panning Mixer.kicad_pcb. PCBKit opens the board in the browser, with nothing to install.

Can I use the Panning Mixer design in my own project?

Its repository states no licence, so its author keeps all rights: ask powsplatboom before reusing the design.