
EinkPDA keyboard
TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

Documentation of my work in getting PCIE GPUs to work on a Raspberry Pi 5
RPI 5 PCIE is an open-source printed circuit board by posorio2004, from the posorio2004/RPI-5-PCIE-GPU repository on GitHub, published under the GPL-3.0 licence. It is a 4-layer board of 100 × 40 mm with 6 parts on 98 nets, routed with 143 tracks and 27 vias.
It is built around the MMBT3904. Its parts include 2 resistors, 2 connectors and 1 transistor. It belongs with the computers and single-board computers boards of this library.
Documentation of my work in getting an MSI Rx 580 to work on a Raspberry Pi 5
Hardware:
Software:
| Qty | Value | Footprint | References |
|---|---|---|---|
| 1 | 2.2k | Resistor_SMD:R_1206_3216Metric | R2 |
| 1 | 4.7k | Resistor_SMD:R_1206_3216Metric | R1 |
| 1 | ATX-24 | Connector_Molex:Molex_Mini-Fit_Jr_5566-24A2_2x12_P4.20mm_Vertical | J2 |
| 1 | Conn_01x16 | MyConnectors:Cvilux_CF31161D0R0-05-NH | J1 |
| 1 | MMBT3904 | Package_TO_SOT_SMD:SOT-23 | Q1 |
| 1 | ~ | PCIe:PCIe x16 | PCIe_x16 |

TalismanDesign/PocketMage_PDA
An E-Ink PDA device using the ESP32 S3.

fossasia/pslab-hardware
PSLab Hardware Design and Schematics https://pslab.io



iMike78/nest-mini-drop-in-pcb
Drop-in PCB replacement for the Google Nest Mini v2 with ESP32-S3, ESP32-P4 and optional ESP32-C6. Inspired by Onju Voice and Home Assistant Voice PE.

ohmtech-rdi/eurorack-blocks
Software to Hardware Prototyping for Eurorack using C++, Max/Gen~ or Faust

Bellafaire/ESP32-Smart-Watch
An open source smartwatch based on the ESP32 compatible with the Arduino IDE.

AndersBNielsen/Relatively-Universal-ROM-Programmer
Hardware to program W27C512 EEPROM or any 24/28/32 pin ROM requiring from 5V to 27V programming voltage.
It measures 100 × 40 mm and has 4 copper layers, 1.58 mm thick.
6 parts, built around the MMBT3904. The full list of its parts is on this page, with links to each part's symbol and footprint where PCBKit's library has them.
From the posorio2004/RPI-5-PCIE-GPU repository on GitHub, at the commit this page was made from: the board is RPI 5 PCIE.kicad_pcb and its schematic RPI 5 PCIE.kicad_sch. PCBKit opens the board in the browser, with nothing to install.
Its repository publishes it under the GPL-3.0 licence: you may reuse it on that licence's terms (keep the author's notice, and for a copyleft licence share your changes alike).